[GiDlist] problem Gid/Safir

[Tom Loschetter]

Hello,

I have a problem with Gid/Safir. After selecting the problem type
SAFIR2007/Gid/SAFIR2007/Safir_Structural_2d and creating a geometry
object, I go to Data - Constraints or Conditions and receive an error
message "GidOpenConditions: Book Mass for Dynamic Calculation not found
in Conditions". On an other machine I got the message
"GidOpenConditions: Book Constraints not found in Conditions" for the
same problem type (For the Safir_Thermal it works fine.) What can be wrong?

[escolano]

Which version of GiD are you using? (see Help-About)
I tried with GiD 10.1.2d for Windows x32 and this problem doesn't appear (at
least with my copy of this SAFIR problemtype)

Try to download the latest available beta version (now is the 10.1.2d), or
the latest official version (now the 10.1.4)

----- Original Message -----
From: "Tom Loschetter" tom.loschetter at schroeder.lu
To: gidlist at listas.cimne.upc.edu
Sent: Friday, February 04, 2011 3:59 PM
Subject: [GiDlist] problem Gid/Safir


Hello,

I have a problem with Gid/Safir. After selecting the problem type
SAFIR2007/Gid/SAFIR2007/Safir_Structural_2d and creating a geometry
object, I go to Data - Constraints or Conditions and receive an error
message "GidOpenConditions: Book Mass for Dynamic Calculation not found
in Conditions". On an other machine I got the message
"GidOpenConditions: Book Constraints not found in Conditions" for the
same problem type (For the Safir_Thermal it works fine.) What can be
wrong?
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

[Eric Tonicello]

Hi, the SAFIR2007 interface may have some problems with GID 2009 and 2010.

A new version should be available this year.

Eric Tonicello

-----Message d'origine-----
De : gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] De la part de Enrique Escolano
Envoyé : vendredi 4 février 2011 16:56
À : gidlist at listas.cimne.upc.edu
Objet : Re: [GiDlist] problem Gid/Safir

Which version of GiD are you using? (see Help-About)
I tried with GiD 10.1.2d for Windows x32 and this problem doesn't appear (at

least with my copy of this SAFIR problemtype)

Try to download the latest available beta version (now is the 10.1.2d), or
the latest official version (now the 10.1.4)

----- Original Message -----
From: "Tom Loschetter" tom.loschetter at schroeder.lu
To: gidlist at listas.cimne.upc.edu
Sent: Friday, February 04, 2011 3:59 PM
Subject: [GiDlist] problem Gid/Safir


Hello,

I have a problem with Gid/Safir. After selecting the problem type
SAFIR2007/Gid/SAFIR2007/Safir_Structural_2d and creating a geometry
object, I go to Data - Constraints or Conditions and receive an error
message "GidOpenConditions: Book Mass for Dynamic Calculation not found
in Conditions". On an other machine I got the message
"GidOpenConditions: Book Constraints not found in Conditions" for the
same problem type (For the Safir_Thermal it works fine.) What can be
wrong?
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

[Tom Loschetter]

Thanks a lot. With the new downloaded version of SAFIR, it seems to work.

TL

Eric Tonicello wrote:
Hi, the SAFIR2007 interface may have some problems with GID 2009 and 2010.

A new version should be available this year.

Eric Tonicello

-----Message d'origine-----
De : gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] De la part de Enrique Escolano
Envoyé : vendredi 4 février 2011 16:56
À : gidlist at listas.cimne.upc.edu
Objet : Re: [GiDlist] problem Gid/Safir

Which version of GiD are you using? (see Help-About)
I tried with GiD 10.1.2d for Windows x32 and this problem doesn't appear (at

least with my copy of this SAFIR problemtype)

Try to download the latest available beta version (now is the 10.1.2d), or
the latest official version (now the 10.1.4)

----- Original Message -----
From: "Tom Loschetter" tom.loschetter at schroeder.lu
To: gidlist at listas.cimne.upc.edu
Sent: Friday, February 04, 2011 3:59 PM
Subject: [GiDlist] problem Gid/Safir



Hello,

I have a problem with Gid/Safir. After selecting the problem type
SAFIR2007/Gid/SAFIR2007/Safir_Structural_2d and creating a geometry
object, I go to Data - Constraints or Conditions and receive an error
message "GidOpenConditions: Book Mass for Dynamic Calculation not found
in Conditions". On an other machine I got the message
"GidOpenConditions: Book Constraints not found in Conditions" for the
same problem type (For the Safir_Thermal it works fine.) What can be
wrong?
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

[Jose Munoz]

Dear all,

When I print to a *eps file a contour plot, a set of thin white lines
are always generated on the coloured areas. Is there a way to avoid them?

Many thanks,

Jose


--
Jose J Munoz, http://www-lacan.upc.es/munoz/
Laboratori de Càlcul Numèric (LaCàN)
Dep. Matemàtica Aplicada III
C/ Comte d'Urgell, 187, Room 1D010
Campus Urgell UPC, Edifici EUETIB
E-08036 Barcelona, Spain
j.munoz at upc.edu, Tel. + 34 93 413 7253

[miguel]

can you send us an example and a snapshot? which version of gid are you
using?
thanks

miguel

-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Jose Munoz
Enviado el: jueves, 17 de marzo de 2011 19:40
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Pstoscript files and contour plots

Dear all,

When I print to a *eps file a contour plot, a set of thin white lines
are always generated on the coloured areas. Is there a way to avoid them?

Many thanks,

Jose


--
Jose J Munoz, http://www-lacan.upc.es/munoz/
Laboratori de Càlcul Numèric (LaCàN)
Dep. Matemàtica Aplicada III
C/ Comte d'Urgell, 187, Room 1D010
Campus Urgell UPC, Edifici EUETIB
E-08036 Barcelona, Spain
j.munoz at upc.edu, Tel. + 34 93 413 7253


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

[Jose Munoz]

Hi Miguel,

Find attached the *.pdf versions of the *.eps files generated. The *.eps
files look as the pdf's, but are much larger. I have used versions
9.1.1b and 10.0.05.

I've also noticed that with version 10.x, the elements are not trimmed
at the bounding box of the *.eps (see file attached), but they are when
using version 9.x. Is there a way to force the trimming of the elements
at the *.eps boundary?

Many thanks,

Jose

On 3/18/2011 12:01 PM, Miguel A. Pasenau de Riera wrote:
can you send us an example and a snapshot? which version of gid are you
using?
thanks

miguel

-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Jose Munoz
Enviado el: jueves, 17 de marzo de 2011 19:40
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Pstoscript files and contour plots

Dear all,

When I print to a *eps file a contour plot, a set of thin white lines
are always generated on the coloured areas. Is there a way to avoid them?

Many thanks,

Jose




-------------- next part --------------
A non-text attachment was scrubbed...
Name: testContour_v10.pdf
Type: application/pdf
Size: 100625 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20110318/34144cb5/attachment-0002.pdf
-------------- next part --------------
A non-text attachment was scrubbed...
Name: testContour_v9.pdf
Type: application/pdf
Size: 107133 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20110318/34144cb5/attachment-0003.pdf
-------------- next part --------------
A non-text attachment was scrubbed...
Name: testContour_v10.eps
Type: application/postscript
Size: 1151262 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20110318/34144cb5/attachment-0001.eps

[miguel]

Hi,
seems to be a problem with the edges of the elements ¿the element lines were
visualized on the screen?
¿have you tried with the screen ps/eps ( Files -- Print to file -- PS/EPS
Screen ...)?
You can control the resolution of the image embedded in the ps file in the
'Files -- Page and capture settings ...' window under 'Resolution'

(...)

i've been doing some tests and although the white lines appear in the ps,
when you send it to the printer these white lines do not appear. i agree
with you that these lines are ugly to see in the screen. seems to be a
rounding problem between elements parts.

The conclusion is that the vectorial ps/eps algorithm needs some rework and
cannot be quick fixed.

Thanks for the info.

Miguel Pasenau

-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Jose Munoz
Enviado el: viernes, 18 de marzo de 2011 12:59
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] Pstoscript files and contour plots

Hi Miguel,

Find attached the *.pdf versions of the *.eps files generated. The *.eps
files look as the pdf's, but are much larger. I have used versions 9.1.1b
and 10.0.05.

I've also noticed that with version 10.x, the elements are not trimmed at
the bounding box of the *.eps (see file attached), but they are when using
version 9.x. Is there a way to force the trimming of the elements at the
*.eps boundary?

Many thanks,

Jose

On 3/18/2011 12:01 PM, Miguel A. Pasenau de Riera wrote:
can you send us an example and a snapshot? which version of gid are
you using?
thanks

miguel

-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Jose Munoz
Enviado el: jueves, 17 de marzo de 2011 19:40
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Pstoscript files and contour plots

Dear all,

When I print to a *eps file a contour plot, a set of thin white lines
are always generated on the coloured areas. Is there a way to avoid them?

Many thanks,

Jose

[Jose Munoz]

Hi Miguel,

Many thanks for your answer.

The element lines where not visualised on the screen (Style=Body).

If I use screen ps/eps, the lines do not appear, but then the image is
not a vectorised plot, which is not what I wanted. Anyway, the
'Resolution' item in the menu does improve the final output of the
rasterised image. Thanks for hint.

Regards,

Jose

On 3/24/2011 11:38 AM, Miguel A. Pasenau de Riera wrote:
Hi,
seems to be a problem with the edges of the elements ¿the element lines were
visualized on the screen?
¿have you tried with the screen ps/eps ( Files -- Print to file -- PS/EPS
Screen ...)?
You can control the resolution of the image embedded in the ps file in the
'Files -- Page and capture settings ...' window under 'Resolution'

(...)

i've been doing some tests and although the white lines appear in the ps,
when you send it to the printer these white lines do not appear. i agree
with you that these lines are ugly to see in the screen. seems to be a
rounding problem between elements parts.

The conclusion is that the vectorial ps/eps algorithm needs some rework and
cannot be quick fixed.

Thanks for the info.

Miguel Pasenau

-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Jose Munoz
Enviado el: viernes, 18 de marzo de 2011 12:59
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] Pstoscript files and contour plots

Hi Miguel,

Find attached the *.pdf versions of the *.eps files generated. The *.eps
files look as the pdf's, but are much larger. I have used versions 9.1.1b
and 10.0.05.

I've also noticed that with version 10.x, the elements are not trimmed at
the bounding box of the *.eps (see file attached), but they are when using
version 9.x. Is there a way to force the trimming of the elements at the
*.eps boundary?

Many thanks,

Jose

On 3/18/2011 12:01 PM, Miguel A. Pasenau de Riera wrote:
can you send us an example and a snapshot? which version of gid are
you using?
thanks

miguel

-----Mensaje original-----
De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Jose Munoz
Enviado el: jueves, 17 de marzo de 2011 19:40
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] Pstoscript files and contour plots

Dear all,

When I print to a *eps file a contour plot, a set of thin white lines
are always generated on the coloured areas. Is there a way to avoid them?

Many thanks,

Jose




_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


--
Jose J Munoz, http://www-lacan.upc.es/munoz/
Laboratori de Càlcul Numèric (LaCàN)
Dep. Matemàtica Aplicada III
C/ Comte d'Urgell, 187, Room 1D010
Campus Urgell UPC, Edifici EUETIB
E-08036 Barcelona, Spain
j.munoz at upc.edu, Tel. + 34 93 413 7253