GiD forum

Hi, all,

I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID.
If the answer is yes, how to achieve it? As far as I understand, it seems
GID can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.

Bests,
Gangjin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140630/b7a40041/attachment.htm

The deformation factor scale is a single uniform value.

Maybe it is interesting for you to know that the 'Copy' window in
postprocess could do a 'Scale' transformation of the mesh, with different
scale values on each x, y, z direction





De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Gangjin Li
Enviado el: lunes, 30 de junio de 2014 15:23
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] problem about scale factor of deformed mesh



Hi, all,



I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID. If
the answer is yes, how to achieve it? As far as I understand, it seems GID
can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.



Bests,

Gangjin

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140630/04359bc8/attachment.htm

Thank you so much, Enrique. Your reply is helpful for me.

Regards,
Gangjin


On Mon, Jun 30, 2014 at 10:37 AM, Enrique Escolano escolano at cimne.upc.edu
wrote:

The deformation factor scale is a single uniform value.

Maybe it is interesting for you to know that the 'Copy' window in
postprocess could do a 'Scale' transformation of the mesh, with different
scale values on each x, y, z direction





*De:* gidlist-bounces at listas.cimne.upc.edu [mailto:
gidlist-bounces at listas.cimne.upc.edu] *En nombre de *Gangjin Li
*Enviado el:* lunes, 30 de junio de 2014 15:23
*Para:* gidlist at listas.cimne.upc.edu
*Asunto:* [GiDlist] problem about scale factor of deformed mesh



Hi, all,



I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID.
If the answer is yes, how to achieve it? As far as I understand, it seems
GID can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.



Bests,

Gangjin

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140630/eb4a96f9/attachment.htm

Hi, Enrique,

I checked the reference manual and GID itself. It seems the 'scale
transformation' is only accessible in pre-process rather than
post-process...Is there any other way in which the deformation mesh with
different scale factors in two directions in post-process stage can be
achieved? I will appreciate your help.

Regards,
Gangjin


On Mon, Jun 30, 2014 at 10:52 AM, Gangjin Li ligangjin87 at gmail.com wrote:

Thank you so much, Enrique. Your reply is helpful for me.

Regards,
Gangjin


On Mon, Jun 30, 2014 at 10:37 AM, Enrique Escolano escolano at cimne.upc.edu
wrote:

The deformation factor scale is a single uniform value.

Maybe it is interesting for you to know that the 'Copy' window in
postprocess could do a 'Scale' transformation of the mesh, with different
scale values on each x, y, z direction





*De:* gidlist-bounces at listas.cimne.upc.edu [mailto:
gidlist-bounces at listas.cimne.upc.edu] *En nombre de *Gangjin Li
*Enviado el:* lunes, 30 de junio de 2014 15:23
*Para:* gidlist at listas.cimne.upc.edu
*Asunto:* [GiDlist] problem about scale factor of deformed mesh



Hi, all,



I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID.
If the answer is yes, how to achieve it? As far as I understand, it seems
GID can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.



Bests,

Gangjin

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140701/27a591af/attachment.htm

The transformation scale is also in postprocess in latest GiD versions,
download the 11.1.9.d developer version
http://www.gidhome.com/download/developer-versions

In doesn’t exists any other option to scale the postprocess mesh



De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Gangjin Li
Enviado el: miércoles, 2 de julio de 2014 3:40
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] problem about scale factor of deformed mesh



Hi, Enrique,



I checked the reference manual and GID itself. It seems the 'scale
transformation' is only accessible in pre-process rather than
post-process...Is there any other way in which the deformation mesh with
different scale factors in two directions in post-process stage can be
achieved? I will appreciate your help.



Regards,

Gangjin



On Mon, Jun 30, 2014 at 10:52 AM, Gangjin Li ligangjin87 at gmail.com wrote:

Thank you so much, Enrique. Your reply is helpful for me.



Regards,

Gangjin



On Mon, Jun 30, 2014 at 10:37 AM, Enrique Escolano escolano at cimne.upc.edu
wrote:

The deformation factor scale is a single uniform value.

Maybe it is interesting for you to know that the ‘Copy’ window in
postprocess could do a ‘Scale’ transformation of the mesh, with different
scale values on each x, y, z direction





De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Gangjin Li
Enviado el: lunes, 30 de junio de 2014 15:23
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] problem about scale factor of deformed mesh



Hi, all,



I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID. If
the answer is yes, how to achieve it? As far as I understand, it seems GID
can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.



Bests,

Gangjin



_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist





-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140702/4978ae65/attachment.htm