[GiDlist] histogram of certain post results

[S.P.Haanappel at utwente.nl]

Dear all,

Is it possible to make a histogram of a certain result variable. For example, collect all stresses in the y-direction from a certain element group and make a histogram of it. Ofcourse, I see options to do it via other programs, but if it is already possible in GID itself, I would save some work.

Thanks!
Sebastiaan




Kind regards,
Sebastiaan Haanappel



Ir. S.P.Haanappel

TPRC, ThermoPlastic composite Research Center

Address
P.O. Box 770
7500 AT Enschede
The Nederlands

Visiting address
Palatijn 15
7521 PN Enschede
The Netherlands

Contact
+31 88 877 3810
s.p.haanappel at utwente.nlmailto:s.p.haanappel at utwente.nl

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120611/e470891a/attachment.htm

[escolano]

The tool to draw this histogram doesn't exists, but it is possible to create a macro to do it inside GiD (or adding an specialized Tcl procededure to a problemtype)

For example there is now a macro in GiD postprocess to list the results you want of some selected entities
The current macro can be invoked from the macros toolbar button, and now you could use it to have the information you want as simple text (that you can copy)
and you can see the Tcl source code of this macro and do a similar one that show the resuls it your own way:
e.g. creating a x-y graph with the GiD-Tcl GiD_Graph command, or creating with Tcl/Tk your own special window drawing the graph in a Tk canvas
(or using the tklib\plotchart package that is a simple package that simplify draw a graph in a canvas, this package is also included in GiD scripts)

Regards

Enrique Escolano
----- Original Message -----
From: S.P.Haanappel at utwente.nl
To: gidlist at listas.cimne.upc.edu
Sent: Monday, June 11, 2012 2:12 PM
Subject: [GiDlist] histogram of certain post results


Dear all,



Is it possible to make a histogram of a certain result variable. For example, collect all stresses in the y-direction from a certain element group and make a histogram of it. Ofcourse, I see options to do it via other programs, but if it is already possible in GID itself, I would save some work.



Thanks!

Sebastiaan









Kind regards,

Sebastiaan Haanappel







Ir. S.P.Haanappel



TPRC, ThermoPlastic composite Research Center



Address
P.O. Box 770
7500 AT Enschede
The Nederlands



Visiting address
Palatijn 15
7521 PN Enschede
The Netherlands



Contact

+31 88 877 3810

s.p.haanappel at utwente.nl





------------------------------------------------------------------------------


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120611/6131a630/attachment.htm

[Farzam, Arash]

Hi,

I have a problem type with 5 different base files. After calculation,
all the base files are written to appropriate .dat files, except the
4th one (floslab-4-slab.bas) which turns the value 676. There are
certain texts as well as commands that none are shown. Is this due to
an error and stopping the process?

Best Regards,
Arash
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FLOSLAB V12.zip
Type: application/zip
Size: 5189 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120611/3088896e/attachment-0001.zip

[escolano]

I think that the bug is that your file is named 'FLOSLAB V12-4-slab.dat' instead as 'LOSLAB V12-4-slab.bas' and then is not considered as a template!!
and the dat output you are obtaining is related to FLOSLAB V12-v.bas that is only printing the amount of nodes with the condition X_Displacement_B.C applied (that probably in your example is 676)

Ech .bas will create a .dat, and the order of these .dat is based on the alphabetical ordenation of the .bas filenames.

Enrique

----- Original Message -----
From: "Farzam, Arash" farzam at ostatemail.okstate.edu
To: gidlist at listas.cimne.upc.edu
Sent: Monday, June 11, 2012 9:22 PM
Subject: [GiDlist] Base file working differently


Hi,

I have a problem type with 5 different base files. After calculation,
all the base files are written to appropriate .dat files, except the
4th one (floslab-4-slab.bas) which turns the value 676. There are
certain texts as well as commands that none are shown. Is this due to
an error and stopping the process?

Best Regards,
Arash



--------------------------------------------------------------------------------


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120612/0ccafd49/attachment.htm

[Farzam, Arash]

Thank you very much,

It worked perfectly. How can I change the color of different elements
in both pre and post processing part? For example, right now, all of
my elements are green. Can I have the volumes and surface elements in
two different colors?

Best Regards,
Arash

On Tue, Jun 12, 2012 at 12:22 PM, Enrique Escolano
escolano at cimne.upc.edu wrote:
I think that the bug is that your file is named 'FLOSLAB V12-4-slab.dat'
instead as 'LOSLAB V12-4-slab.bas' and then is not considered as a
template!!
and the dat output you are obtaining is related to FLOSLAB V12-v.bas that is
only printing the amount of nodes with the condition X_Displacement_B.C
applied (that probably in your example is 676)

Ech .bas will create a .dat, and the order of these .dat is based on the
alphabetical ordenation of the .bas filenames.

Enrique

----- Original Message -----
From: "Farzam, Arash" farzam at ostatemail.okstate.edu
To: gidlist at listas.cimne.upc.edu
Sent: Monday, June 11, 2012 9:22 PM
Subject: [GiDlist] Base file working differently

Hi,

I have a problem type with 5 different base files. After calculation,
all the base files are written to appropriate .dat files, except the
4th one (floslab-4-slab.bas) which turns the value 676. There are
certain texts as well as commands that none are shown. Is this due to
an error and stopping the process?

Best Regards,
Arash


________________________________

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

[escolano]

In preprocess, in 'normal render' element edges are drawn with a color that
can be set in Utilities-Preferences - graphical - Entities colour
and in flat or smooth render, elements are filled with its layer color,
that could be changed.

It is not possible to set the color by the element category: e.g. surfacic
or volumic elements

----- Original Message -----
From: "Farzam, Arash" farzam at ostatemail.okstate.edu
To: gidlist at listas.cimne.upc.edu
Sent: Tuesday, June 12, 2012 8:49 PM
Subject: Re: [GiDlist] Base file working differently


Thank you very much,

It worked perfectly. How can I change the color of different elements
in both pre and post processing part? For example, right now, all of
my elements are green. Can I have the volumes and surface elements in
two different colors?

Best Regards,
Arash

On Tue, Jun 12, 2012 at 12:22 PM, Enrique Escolano
escolano at cimne.upc.edu wrote:
I think that the bug is that your file is named 'FLOSLAB V12-4-slab.dat'
instead as 'LOSLAB V12-4-slab.bas' and then is not considered as a
template!!
and the dat output you are obtaining is related to FLOSLAB V12-v.bas that
is
only printing the amount of nodes with the condition X_Displacement_B.C
applied (that probably in your example is 676)

Ech .bas will create a .dat, and the order of these .dat is based on the
alphabetical ordenation of the .bas filenames.

Enrique

----- Original Message -----
From: "Farzam, Arash" farzam at ostatemail.okstate.edu
To: gidlist at listas.cimne.upc.edu
Sent: Monday, June 11, 2012 9:22 PM
Subject: [GiDlist] Base file working differently

Hi,

I have a problem type with 5 different base files. After calculation,
all the base files are written to appropriate .dat files, except the
4th one (floslab-4-slab.bas) which turns the value 676. There are
certain texts as well as commands that none are shown. Is this due to
an error and stopping the process?

Best Regards,
Arash


________________________________

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

[Farzam, Arash]

Hi,

Thanks a lot for your reply. I am meshing a 800*800 cm surface with
quadrilateral elements of 100*100, but I am not getting all of the
nodes at 100 cm intervals. Some are a little bit different in
coordinates, while I want them to be at exact 100 cm intervals
(because they should be coupled with hexahedran element nodes right
under them). Is there a setting for that?
This happens only for the surface meshing with quadrilateral elements
and the hexahedran mesh is exactly at 100 cm intervals. that is why
they don't match each other.

Best Regards,
Arash

On Wed, Jun 13, 2012 at 4:18 AM, Enrique Escolano
escolano at cimne.upc.edu wrote:
In preprocess, in 'normal render' element edges are drawn with a color that
can be set in Utilities-Preferences - graphical - Entities colour
and in flat or smooth render, elements are filled with its layer color,
that could be changed.

It is not possible to set the color by the element category: e.g. surfacic
or volumic elements

----- Original Message -----
From: "Farzam, Arash" farzam at ostatemail.okstate.edu
To: gidlist at listas.cimne.upc.edu
Sent: Tuesday, June 12, 2012 8:49 PM
Subject: Re: [GiDlist] Base file working differently


Thank you very much,

It worked perfectly. How can I change the color of different elements
in both pre and post processing part? For example, right now, all of
my elements are green. Can I have the volumes and surface elements in
two different colors?

Best Regards,
Arash

On Tue, Jun 12, 2012 at 12:22 PM, Enrique Escolano
escolano at cimne.upc.edu wrote:
I think that the bug is that your file is named 'FLOSLAB V12-4-slab.dat'
instead as 'LOSLAB V12-4-slab.bas' and then is not considered as a
template!!
and the dat output you are obtaining is related to FLOSLAB V12-v.bas that
is
only printing the amount of nodes with the condition X_Displacement_B.C
applied (that probably in your example is 676)

Ech .bas will create a .dat, and the order of these .dat is based on the
alphabetical ordenation of the .bas filenames.

Enrique

----- Original Message -----
From: "Farzam, Arash" farzam at ostatemail.okstate.edu
To: gidlist at listas.cimne.upc.edu
Sent: Monday, June 11, 2012 9:22 PM
Subject: [GiDlist] Base file working differently

Hi,

I have a problem type with 5 different base files. After calculation,
all the base files are written to appropriate .dat files, except the
4th one (floslab-4-slab.bas) which turns the value 676. There are
certain texts as well as commands that none are shown. Is this due to
an error and stopping the process?

Best Regards,
Arash


________________________________

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

[escolano]

Internal nodes of structured meshes are not placed in a simple way (e.g.
linear interpolation), then in general is not possible to have the exact
location you want. The algorihms are made for more general cases, with
curved shapes.

It is difficult say what to do without have the model.
The creation mode of the surface could affect the location of the
interpolated nodes (the parametrization of the surface and if it is trimmed
or untrimmed is important)
If the surface has 4 sides, you can force the creation of a untrimmed NURBS
using 'No try planar' in the contextual menu during the NURBS creation.

Do you really need this 'exact linear intepolation' location of nodes or do
you need a matching between quadrilaterals and hexahedra faces?
e.g. you can force a one-to-one relationship between nodes of two 'similar
sufaces' creating a 'contact volume between them
or what about sharing the same surface for the mesh of quadrilaterals and
the mesh of hexahedra?

Enrique

----- Original Message -----
From: "Farzam, Arash" farzam at ostatemail.okstate.edu
To: gidlist at listas.cimne.upc.edu
Sent: Wednesday, June 13, 2012 11:50 PM
Subject: Re: [GiDlist] Base file working differently


Hi,

Thanks a lot for your reply. I am meshing a 800*800 cm surface with
quadrilateral elements of 100*100, but I am not getting all of the
nodes at 100 cm intervals. Some are a little bit different in
coordinates, while I want them to be at exact 100 cm intervals
(because they should be coupled with hexahedran element nodes right
under them). Is there a setting for that?
This happens only for the surface meshing with quadrilateral elements
and the hexahedran mesh is exactly at 100 cm intervals. that is why
they don't match each other.

Best Regards,
Arash

On Wed, Jun 13, 2012 at 4:18 AM, Enrique Escolano
escolano at cimne.upc.edu wrote:
In preprocess, in 'normal render' element edges are drawn with a color
that
can be set in Utilities-Preferences - graphical - Entities colour
and in flat or smooth render, elements are filled with its layer color,
that could be changed.

It is not possible to set the color by the element category: e.g.
surfacic
or volumic elements

----- Original Message -----
From: "Farzam, Arash" farzam at ostatemail.okstate.edu
To: gidlist at listas.cimne.upc.edu
Sent: Tuesday, June 12, 2012 8:49 PM
Subject: Re: [GiDlist] Base file working differently


Thank you very much,

It worked perfectly. How can I change the color of different elements
in both pre and post processing part? For example, right now, all of
my elements are green. Can I have the volumes and surface elements in
two different colors?

Best Regards,
Arash

On Tue, Jun 12, 2012 at 12:22 PM, Enrique Escolano
escolano at cimne.upc.edu wrote:
I think that the bug is that your file is named 'FLOSLAB
V12-4-slab.dat'
instead as 'LOSLAB V12-4-slab.bas' and then is not considered as a
template!!
and the dat output you are obtaining is related to FLOSLAB V12-v.bas
that
is
only printing the amount of nodes with the condition X_Displacement_B.C
applied (that probably in your example is 676)

Ech .bas will create a .dat, and the order of these .dat is based on
the
alphabetical ordenation of the .bas filenames.

Enrique

----- Original Message -----
From: "Farzam, Arash" farzam at ostatemail.okstate.edu
To: gidlist at listas.cimne.upc.edu
Sent: Monday, June 11, 2012 9:22 PM
Subject: [GiDlist] Base file working differently

Hi,

I have a problem type with 5 different base files. After calculation,
all the base files are written to appropriate .dat files, except the
4th one (floslab-4-slab.bas) which turns the value 676. There are
certain texts as well as commands that none are shown. Is this due to
an error and stopping the process?

Best Regards,
Arash


________________________________

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

[heleno junior]

Oi você saberia mim dizer qual o problem type que eu vou usar para analisar o escoamento em torno de um cilindro?




Date: Wed, 13 Jun 2012 16:50:00 -0500
From: farzam en ostatemail.okstate.edu
To: gidlist en listas.cimne.upc.edu
Subject: Re: [GiDlist] Base file working differently

Hi,

Thanks a lot for your reply. I am meshing a 800*800 cm surface with
quadrilateral elements of 100*100, but I am not getting all of the
nodes at 100 cm intervals. Some are a little bit different in
coordinates, while I want them to be at exact 100 cm intervals
(because they should be coupled with hexahedran element nodes right
under them). Is there a setting for that?
This happens only for the surface meshing with quadrilateral elements
and the hexahedran mesh is exactly at 100 cm intervals. that is why
they don't match each other.

Best Regards,
Arash

On Wed, Jun 13, 2012 at 4:18 AM, Enrique Escolano
escolano en cimne.upc.edu wrote:
In preprocess, in 'normal render' element edges are drawn with a color that
can be set in Utilities-Preferences - graphical - Entities colour
and in flat or smooth render, elements are filled with its layer color,
that could be changed.

It is not possible to set the color by the element category: e.g. surfacic
or volumic elements

----- Original Message -----
From: "Farzam, Arash" farzam en ostatemail.okstate.edu
To: gidlist en listas.cimne.upc.edu
Sent: Tuesday, June 12, 2012 8:49 PM
Subject: Re: [GiDlist] Base file working differently


Thank you very much,

It worked perfectly. How can I change the color of different elements
in both pre and post processing part? For example, right now, all of
my elements are green. Can I have the volumes and surface elements in
two different colors?

Best Regards,
Arash

On Tue, Jun 12, 2012 at 12:22 PM, Enrique Escolano
escolano en cimne.upc.edu wrote:
I think that the bug is that your file is named 'FLOSLAB V12-4-slab.dat'
instead as 'LOSLAB V12-4-slab.bas' and then is not considered as a
template!!
and the dat output you are obtaining is related to FLOSLAB V12-v.bas that
is
only printing the amount of nodes with the condition X_Displacement_B.C
applied (that probably in your example is 676)

Ech .bas will create a .dat, and the order of these .dat is based on the
alphabetical ordenation of the .bas filenames.

Enrique

----- Original Message -----
From: "Farzam, Arash" farzam en ostatemail.okstate.edu
To: gidlist en listas.cimne.upc.edu
Sent: Monday, June 11, 2012 9:22 PM
Subject: [GiDlist] Base file working differently

Hi,

I have a problem type with 5 different base files. After calculation,
all the base files are written to appropriate .dat files, except the
4th one (floslab-4-slab.bas) which turns the value 676. There are
certain texts as well as commands that none are shown. Is this due to
an error and stopping the process?

Best Regards,
Arash


________________________________

_______________________________________________
GiDlist mailing list
GiDlist en listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist en listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist en listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist en listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist en listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist

------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120615/eccc8733/attachment.htm