[ GiDlist ] Shell thickness

[Enrique Escolano]

In the file *.bas, you can change the C style printf format %8.2f (too
small to print 0.005)
for example to %8.4g

You can also re-download this problem type interface corrected.
http://gid.cimne.upc.es/gidplus/index.html

----- Original Message -----
From: "Olivier Bounhoure" olivier.bounhoure at club-internet.fr
To: gidlist at gatxan.cimne.upc.es
Sent: Tuesday, June 12, 2001 7:32 PM
Subject: [ GiDlist ] Shell thickness


This is again a problem I have during a Nastran_plane export : thicknesses
lower than 0.01 are all changed in "0.01". I tried this with many
materials,
the thickness always grew up. I tried the exponential format but it
doesn't
work.
Regards
Olivier Bounhoure