Hello,
sometimes it would be profitable if I could see in the same view a layer as
wireframe and another as shaded.
Is it possible?
Regards
ALDO GHISI
Ph.D. student
Department of Structural Engineering
Politecnico di Milano
Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Tel.: +39 02 2399 4218
Fax.: +39 02 2399 4220
E_mail: ghisi at stru.polimi.it
[GiDlist] different layers visualization
Moderator: GiD Team
[GiDlist] different layers visualization
by now, it is not possible.
If you are speaking for the post process part, it is already in the
TODO list. I think it'll be present for version 7.x, but not for 7.0.
for the preprocess part, it is not present in the todo list,
but it is an interesting idea.
Which situations do you think, this feature will be interesant?
miguel
Aldo Ghisi wrote:
Hello,
sometimes it would be profitable if I could see in the same view a layer as
wireframe and another as shaded.
Is it possible?
Regards
ALDO GHISI
Ph.D. student
Department of Structural Engineering
Politecnico di Milano
Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Tel.: +39 02 2399 4218
Fax.: +39 02 2399 4220
E_mail: ghisi at stru.polimi.it
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
If you are speaking for the post process part, it is already in the
TODO list. I think it'll be present for version 7.x, but not for 7.0.
for the preprocess part, it is not present in the todo list,
but it is an interesting idea.
Which situations do you think, this feature will be interesant?
miguel
Aldo Ghisi wrote:
Hello,
sometimes it would be profitable if I could see in the same view a layer as
wireframe and another as shaded.
Is it possible?
Regards
ALDO GHISI
Ph.D. student
Department of Structural Engineering
Politecnico di Milano
Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Tel.: +39 02 2399 4218
Fax.: +39 02 2399 4220
E_mail: ghisi at stru.polimi.it
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
[GiDlist] different layers visualization
Yes, I was talking about the preprocess phase.
I think it could be useful when you are making corrections over a _very
complex_ model (using GiD as a CAD) and you need to change some surfaces in
the interior of volumes (an "hand-made" defeaturing ).
Then, you could visualize some parts as shaded and what you want to change
as wireframe.
Otherwise you see a lot of lines or only the exterior of the model.
Thank you and regards
At 16.00 12/04/2002 +0200, you wrote:
by now, it is not possible.
If you are speaking for the post process part, it is already in the
TODO list. I think it'll be present for version 7.x, but not for 7.0.
for the preprocess part, it is not present in the todo list,
but it is an interesting idea.
Which situations do you think, this feature will be interesant?
miguel
Aldo Ghisi wrote:
Hello,
sometimes it would be profitable if I could see in the same view a layer as
wireframe and another as shaded.
Is it possible?
Regards
ALDO GHISI
Ph.D. student
Department of Structural Engineering
Politecnico di Milano
Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Tel.: +39 02 2399 4218
Fax.: +39 02 2399 4220
E_mail: ghisi at stru.polimi.it
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. de Riera
Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
I think it could be useful when you are making corrections over a _very
complex_ model (using GiD as a CAD) and you need to change some surfaces in
the interior of volumes (an "hand-made" defeaturing ).
Then, you could visualize some parts as shaded and what you want to change
as wireframe.
Otherwise you see a lot of lines or only the exterior of the model.
Thank you and regards
At 16.00 12/04/2002 +0200, you wrote:
by now, it is not possible.
If you are speaking for the post process part, it is already in the
TODO list. I think it'll be present for version 7.x, but not for 7.0.
for the preprocess part, it is not present in the todo list,
but it is an interesting idea.
Which situations do you think, this feature will be interesant?
miguel
Aldo Ghisi wrote:
Hello,
sometimes it would be profitable if I could see in the same view a layer as
wireframe and another as shaded.
Is it possible?
Regards
ALDO GHISI
Ph.D. student
Department of Structural Engineering
Politecnico di Milano
Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Tel.: +39 02 2399 4218
Fax.: +39 02 2399 4220
E_mail: ghisi at stru.polimi.it
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. de Riera
Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist