Dear GiD-Users,
Is anybody familiar with grid-refinement procedures in GiD?
For my application I have a complex 3D geometry (strawberry)
in which I want to make some refinements only at the interior part
(central region) of the mesh.
Since this is hard to do in a manual way, I was wondering if there
is an automatic refinement tool available in GiD.
Many thanks
Nico
Nico Scheerlinck
K.U.Leuven
Laboratory of Postharvest Technology
W. De Croylaan 42
B-3001 Leuven
Phone: +32 (0)16 32 26 68
Fax: +32 (0)16 32 29 55
Email: nico.scheerlinck at agr.kuleuven.ac.be
[GiDlist] Automatic Grid Refinement
Moderator: GiD Team
-
Enrique Escolano
[GiDlist] Automatic Grid Refinement
GiD can assign mesh sizes to points, lines, surfaces or volumes.
To refine the interior, try to assing a size to boundary points, lines and
surfaces,
and another small size to the volume.
Select also in preferences a transition factor fast or slow as needed.
Enrique Escolano
----- Original Message -----
From: Nico.Scheerlinck at agr.kuleuven.ac.be
To: gidlist at gatxan.cimne.upc.es
Sent: Saturday, March 23, 2002 4:53 AM
Subject: [GiDlist] Automatic Grid Refinement
Dear GiD-Users,
Is anybody familiar with grid-refinement procedures in GiD?
For my application I have a complex 3D geometry (strawberry)
in which I want to make some refinements only at the interior part
(central region) of the mesh.
Since this is hard to do in a manual way, I was wondering if there
is an automatic refinement tool available in GiD.
Many thanks
Nico
Nico Scheerlinck
K.U.Leuven
Laboratory of Postharvest Technology
W. De Croylaan 42
B-3001 Leuven
Phone: +32 (0)16 32 26 68
Fax: +32 (0)16 32 29 55
Email: nico.scheerlinck at agr.kuleuven.ac.be
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
To refine the interior, try to assing a size to boundary points, lines and
surfaces,
and another small size to the volume.
Select also in preferences a transition factor fast or slow as needed.
Enrique Escolano
----- Original Message -----
From: Nico.Scheerlinck at agr.kuleuven.ac.be
To: gidlist at gatxan.cimne.upc.es
Sent: Saturday, March 23, 2002 4:53 AM
Subject: [GiDlist] Automatic Grid Refinement
Dear GiD-Users,
Is anybody familiar with grid-refinement procedures in GiD?
For my application I have a complex 3D geometry (strawberry)
in which I want to make some refinements only at the interior part
(central region) of the mesh.
Since this is hard to do in a manual way, I was wondering if there
is an automatic refinement tool available in GiD.
Many thanks
Nico
Nico Scheerlinck
K.U.Leuven
Laboratory of Postharvest Technology
W. De Croylaan 42
B-3001 Leuven
Phone: +32 (0)16 32 26 68
Fax: +32 (0)16 32 29 55
Email: nico.scheerlinck at agr.kuleuven.ac.be
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
-
Nico.Scheerlinck at agr.kuleuven.ac.be
[GiDlist] Automatic Grid Refinement
Many thanks for the tips !!!
Nico
Nico Scheerlinck
K.U.Leuven
Laboratory of Postharvest Technology
W. De Croylaan 42
B-3001 Leuven
Phone: +32 (0)16 32 26 68
Fax: +32 (0)16 32 29 55
Email: nico.scheerlinck at agr.kuleuven.ac.be
GiD can assign mesh sizes to points, lines, surfaces or volumes.
To refine the interior, try to assing a size to boundary points, lines
and
surfaces,
and another small size to the volume.
Select also in preferences a transition factor fast or slow as needed.
Enrique Escolano
----- Original Message -----
From: Nico.Scheerlinck at agr.kuleuven.ac.be
To: gidlist at gatxan.cimne.upc.es
Sent: Saturday, March 23, 2002 4:53 AM
Subject: [GiDlist] Automatic Grid Refinement
Dear GiD-Users,
Is anybody familiar with grid-refinement procedures in GiD?
For my application I have a complex 3D geometry (strawberry)
in which I want to make some refinements only at the interior part
(central region) of the mesh.
Since this is hard to do in a manual way, I was wondering if there
is an automatic refinement tool available in GiD.
Many thanks
Nico
Nico Scheerlinck
K.U.Leuven
Laboratory of Postharvest Technology
W. De Croylaan 42
B-3001 Leuven
Phone: +32 (0)16 32 26 68
Fax: +32 (0)16 32 29 55
Email: nico.scheerlinck at agr.kuleuven.ac.be
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
Nico
Nico Scheerlinck
K.U.Leuven
Laboratory of Postharvest Technology
W. De Croylaan 42
B-3001 Leuven
Phone: +32 (0)16 32 26 68
Fax: +32 (0)16 32 29 55
Email: nico.scheerlinck at agr.kuleuven.ac.be
GiD can assign mesh sizes to points, lines, surfaces or volumes.
To refine the interior, try to assing a size to boundary points, lines
and
surfaces,
and another small size to the volume.
Select also in preferences a transition factor fast or slow as needed.
Enrique Escolano
----- Original Message -----
From: Nico.Scheerlinck at agr.kuleuven.ac.be
To: gidlist at gatxan.cimne.upc.es
Sent: Saturday, March 23, 2002 4:53 AM
Subject: [GiDlist] Automatic Grid Refinement
Dear GiD-Users,
Is anybody familiar with grid-refinement procedures in GiD?
For my application I have a complex 3D geometry (strawberry)
in which I want to make some refinements only at the interior part
(central region) of the mesh.
Since this is hard to do in a manual way, I was wondering if there
is an automatic refinement tool available in GiD.
Many thanks
Nico
Nico Scheerlinck
K.U.Leuven
Laboratory of Postharvest Technology
W. De Croylaan 42
B-3001 Leuven
Phone: +32 (0)16 32 26 68
Fax: +32 (0)16 32 29 55
Email: nico.scheerlinck at agr.kuleuven.ac.be
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist