Hi everyone,
Why the command “Geometry” “Create” “Volume” “Search” gets
disabled when I rotate, pan or similar?
Regards
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com
[GiDlist] Volume by search ...
Moderator: GiD Team
[GiDlist] Mark D. Moeckel/0Y/Caterpillar is out of the offic
I will be out of the office starting 30Oct2003 and will not return until
5Nov2003.
5Nov2003.
[GiDlist] post-processing color transition
Hi everyone!
I am a new user of GID, and i would like to ask you all a question.
I have a surface meshed with triangular patches, ad i have a different value
assigned to each surface. In post processing I obtain an immage with the
triangular patches differently colored according to the assigned values.
What I would like to know is: is there a way to have a gradual transition
between the colors of two near patches? I mean, if i have a red patch ad
a yellow patch, is there a way to make the color "fade" from red to yellow
through orange (for example)?
Thank you everyone in advence,
Alessio
P.s.: sorry for my poor english.
Salve a tutti!
Sono un nuovo utente di GID e vorre fare una domanda a tutti voi.
Ho una superficie discretizata tramite elementi triangolari, e ad ogni elemento
e' assegnato un diverso valore. In post-processing ottengo un'imagine con
i patch tringolari colorati a seconda del valore assegnato.
Quello che vorrei sapere e': c'e' un modo per ottenere un passaggio graduale
nei colori di due elementi adiacenti? Ossia, se io ho un elemento rosso
attaccato ad uno giallo, c'e' la possibilita' di far sfumare il colore da
giallo a rosso attraverso, per esempio, l'arancione?
Grazie a tutti in anticipo,
Alessio
__________________________________________________________________
Tiscali ADSL SENZA CANONE, paghi solo quello che consumi!
Navighi a 1,5 euro all'ora e il modem e' gratis! Abbonati subito.
http://point.tiscali.it/Adsl/prodotti/senzacanone/
I am a new user of GID, and i would like to ask you all a question.
I have a surface meshed with triangular patches, ad i have a different value
assigned to each surface. In post processing I obtain an immage with the
triangular patches differently colored according to the assigned values.
What I would like to know is: is there a way to have a gradual transition
between the colors of two near patches? I mean, if i have a red patch ad
a yellow patch, is there a way to make the color "fade" from red to yellow
through orange (for example)?
Thank you everyone in advence,
Alessio
P.s.: sorry for my poor english.
Salve a tutti!
Sono un nuovo utente di GID e vorre fare una domanda a tutti voi.
Ho una superficie discretizata tramite elementi triangolari, e ad ogni elemento
e' assegnato un diverso valore. In post-processing ottengo un'imagine con
i patch tringolari colorati a seconda del valore assegnato.
Quello che vorrei sapere e': c'e' un modo per ottenere un passaggio graduale
nei colori di due elementi adiacenti? Ossia, se io ho un elemento rosso
attaccato ad uno giallo, c'e' la possibilita' di far sfumare il colore da
giallo a rosso attraverso, per esempio, l'arancione?
Grazie a tutti in anticipo,
Alessio
__________________________________________________________________
Tiscali ADSL SENZA CANONE, paghi solo quello che consumi!
Navighi a 1,5 euro all'ora e il modem e' gratis! Abbonati subito.
http://point.tiscali.it/Adsl/prodotti/senzacanone/
[GiDlist] post-processing color transition
Just enter these results as nodal values,
and/or be sure that the 'edges' and nodes between both surfaces are shared among these surfaces.
miguel
durthu at tiscali.it wrote:
Hi everyone!
I am a new user of GID, and i would like to ask you all a question.
I have a surface meshed with triangular patches, ad i have a different value
assigned to each surface. In post processing I obtain an immage with the
triangular patches differently colored according to the assigned values.
What I would like to know is: is there a way to have a gradual transition
between the colors of two near patches? I mean, if i have a red patch ad
a yellow patch, is there a way to make the color "fade" from red to yellow
through orange (for example)?
Thank you everyone in advence,
Alessio
P.s.: sorry for my poor english.
Salve a tutti!
Sono un nuovo utente di GID e vorre fare una domanda a tutti voi.
Ho una superficie discretizata tramite elementi triangolari, e ad ogni elemento
e' assegnato un diverso valore. In post-processing ottengo un'imagine con
i patch tringolari colorati a seconda del valore assegnato.
Quello che vorrei sapere e': c'e' un modo per ottenere un passaggio graduale
nei colori di due elementi adiacenti? Ossia, se io ho un elemento rosso
attaccato ad uno giallo, c'e' la possibilita' di far sfumare il colore da
giallo a rosso attraverso, per esempio, l'arancione?
Grazie a tutti in anticipo,
Alessio
__________________________________________________________________
Tiscali ADSL SENZA CANONE, paghi solo quello che consumi!
Navighi a 1,5 euro all'ora e il modem e' gratis! Abbonati subito.
http://point.tiscali.it/Adsl/prodotti/senzacanone/
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera miguel at cimne.upc.es http://gid.cimne.upc.es
and/or be sure that the 'edges' and nodes between both surfaces are shared among these surfaces.
miguel
durthu at tiscali.it wrote:
Hi everyone!
I am a new user of GID, and i would like to ask you all a question.
I have a surface meshed with triangular patches, ad i have a different value
assigned to each surface. In post processing I obtain an immage with the
triangular patches differently colored according to the assigned values.
What I would like to know is: is there a way to have a gradual transition
between the colors of two near patches? I mean, if i have a red patch ad
a yellow patch, is there a way to make the color "fade" from red to yellow
through orange (for example)?
Thank you everyone in advence,
Alessio
P.s.: sorry for my poor english.
Salve a tutti!
Sono un nuovo utente di GID e vorre fare una domanda a tutti voi.
Ho una superficie discretizata tramite elementi triangolari, e ad ogni elemento
e' assegnato un diverso valore. In post-processing ottengo un'imagine con
i patch tringolari colorati a seconda del valore assegnato.
Quello che vorrei sapere e': c'e' un modo per ottenere un passaggio graduale
nei colori di due elementi adiacenti? Ossia, se io ho un elemento rosso
attaccato ad uno giallo, c'e' la possibilita' di far sfumare il colore da
giallo a rosso attraverso, per esempio, l'arancione?
Grazie a tutti in anticipo,
Alessio
__________________________________________________________________
Tiscali ADSL SENZA CANONE, paghi solo quello che consumi!
Navighi a 1,5 euro all'ora e il modem e' gratis! Abbonati subito.
http://point.tiscali.it/Adsl/prodotti/senzacanone/
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera miguel at cimne.upc.es http://gid.cimne.upc.es
[GiDlist] post-processing color transition
Thank you very much!
I will try and let you know!
__________________________________________________________________
Tiscali ADSL SENZA CANONE, paghi solo quello che consumi!
Navighi a 1,5 euro all'ora e il modem e' gratis! Abbonati subito.
http://point.tiscali.it/Adsl/prodotti/senzacanone/
I will try and let you know!
__________________________________________________________________
Tiscali ADSL SENZA CANONE, paghi solo quello che consumi!
Navighi a 1,5 euro all'ora e il modem e' gratis! Abbonati subito.
http://point.tiscali.it/Adsl/prodotti/senzacanone/
[GiDlist] Volume by search ...
This is a small bug. Now is corrected for the next beta.
Thanks for your report
Enrique
----- Original Message -----
From: "Andrea Calaon" andrea at beasy.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, October 31, 2003 12:59 PM
Subject: [GiDlist] Volume by search ...
Hi everyone,
Why the command "Geometry" "Create" "Volume" "Search" gets
disabled when I rotate, pan or similar?
Regards
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
Thanks for your report
Enrique
----- Original Message -----
From: "Andrea Calaon" andrea at beasy.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, October 31, 2003 12:59 PM
Subject: [GiDlist] Volume by search ...
Hi everyone,
Why the command "Geometry" "Create" "Volume" "Search" gets
disabled when I rotate, pan or similar?
Regards
Andrea Calaon
Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist