Is it possible to do a search on the gid list archives & if so how?
Is there any specific documentation on the use of SET HIDE RESTORE &
DEPENDENCIES as used in the .prb file with ver gid 6.3.0b, I have downloaded
the nastran problem type & looked at it's .prb file but I have a problem
with some of my QUESTION fields not hiding when they should, see below .prb
file
PROBLEM DATA
BOOK: Model Units
TITLE: Units
QUESTION: Units#CB#(m,mm)
VALUE: mm
HELP: Choose the units for the model
BOOK: Matrix Solver
TITLE: Type
QUESTION: Solution_Method#CB#(Direct,Iterative)
VALUE: Iterative
DEPENDENCIES:(Direct,RESTORE,LU,#CURRENT#,HIDE,Algorithm,#CURRENT#,HIDE,Prec
onditioner,#CURRENT#,HIDE,Precision,#CURRENT#,HIDE,Residual_error,#CURRENT#)
(Iterative,HIDE,LU,#CURRENT#,RESTORE,Algorithm,#CURRENT#,RESTORE,Precision,#
CURRENT#,RESTORE,Residual_error,#CURRENT#)
QUESTION: LU#CB#(Decomposition)
VALUE: Decomposition
QUESTION: Algorithm#CB#(CGS,BiCG,BiCGSTAB)
VALUE: CGS
DEPENDENCIES:(CGS,RESTORE,Preconditioner,#CURRENT#)(BiCG,HIDE,Preconditioner
,#CURRENT#)(BiCGSTAB,HIDE,Preconditioner,#CURRENT#)
HELP: Conjugate gradient squared (CGS) likely to be best choice.
QUESTION: Preconditioner#CB#(Vanilla,Point_Jacobi,Tridiagonal)
HELP: Tridiagonal fastest but uses most memory (reccomended) Vanilla slowest
but requires least memory.
VALUE: Tridiagonal
QUESTION:Precision#CB#(Single,Double)
HELP: Internal precision of iterative solver, fastest is Double but requires
more memory for vector storage. Matrix is held as single precision
VALUE: Double
QUESTION:Residual_error
VALUE: 1e-6
HELP: The smaller the value the more iterations required.
END GENERAL DATA
I select matrix solver as direct & fields hide OK I then accept data &
close. But if I open up data-problem data-matrix solver again then a
supposedly hidden field Preconditioner shows itself ?
Is this a bug that can only be fixed by upgrading?
Are comments allowed in a .prb file & if so how?
Thanks in advance
Mark
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.502 / Virus Database: 300 - Release Date: 18/07/2003
The information contained in this e-mail message (and any attachment
transmitted herewith) is privileged and confidential and is intended for the
exclusive use of the addressee(s). If you are not an addressee, any
disclosure, reproduction, distribution or other dissemination or use of this
communication is strictly prohibited. If you have received this
communication in error, please contact us immediately so that we can correct
the error.
[GiDlist] Searching the archives & .prb files
Moderator: GiD Team
-
Enrique Escolano
[GiDlist] Searching the archives & .prb files
In the main page of GiD (http://www.gidhome.com) exists a input field to
make a search.
It's located at the lower right corner (attention: it is difficult to
distinguish it of the background)
Note: Some features cannot work for old GiD versions.
Enrique Escolano
----- Original Message -----
From: "Mark Smith" mark.smith at linx.co.uk
To: "Gidlist (E-mail)" gidlist at gatxan.cimne.upc.es
Sent: Wednesday, July 30, 2003 11:59 AM
Subject: [GiDlist] Searching the archives & .prb files
Is it possible to do a search on the gid list archives & if so how?
Is there any specific documentation on the use of SET HIDE RESTORE &
DEPENDENCIES as used in the .prb file with ver gid 6.3.0b, I have
downloaded
the nastran problem type & looked at it's .prb file but I have a problem
with some of my QUESTION fields not hiding when they should, see below
.prb
file
PROBLEM DATA
BOOK: Model Units
TITLE: Units
QUESTION: Units#CB#(m,mm)
VALUE: mm
HELP: Choose the units for the model
BOOK: Matrix Solver
TITLE: Type
QUESTION: Solution_Method#CB#(Direct,Iterative)
VALUE: Iterative
DEPENDENCIES:(Direct,RESTORE,LU,#CURRENT#,HIDE,Algorithm,#CURRENT#,HIDE,Prec
onditioner,#CURRENT#,HIDE,Precision,#CURRENT#,HIDE,Residual_error,#CURRENT#)
(Iterative,HIDE,LU,#CURRENT#,RESTORE,Algorithm,#CURRENT#,RESTORE,Precision,#
CURRENT#,RESTORE,Residual_error,#CURRENT#)
QUESTION: LU#CB#(Decomposition)
VALUE: Decomposition
QUESTION: Algorithm#CB#(CGS,BiCG,BiCGSTAB)
VALUE: CGS
DEPENDENCIES:(CGS,RESTORE,Preconditioner,#CURRENT#)(BiCG,HIDE,Preconditioner
,#CURRENT#)(BiCGSTAB,HIDE,Preconditioner,#CURRENT#)
HELP: Conjugate gradient squared (CGS) likely to be best choice.
QUESTION: Preconditioner#CB#(Vanilla,Point_Jacobi,Tridiagonal)
HELP: Tridiagonal fastest but uses most memory (reccomended) Vanilla
slowest
but requires least memory.
VALUE: Tridiagonal
QUESTION:Precision#CB#(Single,Double)
HELP: Internal precision of iterative solver, fastest is Double but
requires
more memory for vector storage. Matrix is held as single precision
VALUE: Double
QUESTION:Residual_error
VALUE: 1e-6
HELP: The smaller the value the more iterations required.
END GENERAL DATA
I select matrix solver as direct & fields hide OK I then accept data &
close. But if I open up data-problem data-matrix solver again then a
supposedly hidden field Preconditioner shows itself ?
Is this a bug that can only be fixed by upgrading?
Are comments allowed in a .prb file & if so how?
Thanks in advance
Mark
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.502 / Virus Database: 300 - Release Date: 18/07/2003
The information contained in this e-mail message (and any attachment
transmitted herewith) is privileged and confidential and is intended for
the
exclusive use of the addressee(s). If you are not an addressee, any
disclosure, reproduction, distribution or other dissemination or use of
this
communication is strictly prohibited. If you have received this
communication in error, please contact us immediately so that we can
correct
the error.
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
make a search.
It's located at the lower right corner (attention: it is difficult to
distinguish it of the background)
Note: Some features cannot work for old GiD versions.
Enrique Escolano
----- Original Message -----
From: "Mark Smith" mark.smith at linx.co.uk
To: "Gidlist (E-mail)" gidlist at gatxan.cimne.upc.es
Sent: Wednesday, July 30, 2003 11:59 AM
Subject: [GiDlist] Searching the archives & .prb files
Is it possible to do a search on the gid list archives & if so how?
Is there any specific documentation on the use of SET HIDE RESTORE &
DEPENDENCIES as used in the .prb file with ver gid 6.3.0b, I have
downloaded
the nastran problem type & looked at it's .prb file but I have a problem
with some of my QUESTION fields not hiding when they should, see below
.prb
file
PROBLEM DATA
BOOK: Model Units
TITLE: Units
QUESTION: Units#CB#(m,mm)
VALUE: mm
HELP: Choose the units for the model
BOOK: Matrix Solver
TITLE: Type
QUESTION: Solution_Method#CB#(Direct,Iterative)
VALUE: Iterative
DEPENDENCIES:(Direct,RESTORE,LU,#CURRENT#,HIDE,Algorithm,#CURRENT#,HIDE,Prec
onditioner,#CURRENT#,HIDE,Precision,#CURRENT#,HIDE,Residual_error,#CURRENT#)
(Iterative,HIDE,LU,#CURRENT#,RESTORE,Algorithm,#CURRENT#,RESTORE,Precision,#
CURRENT#,RESTORE,Residual_error,#CURRENT#)
QUESTION: LU#CB#(Decomposition)
VALUE: Decomposition
QUESTION: Algorithm#CB#(CGS,BiCG,BiCGSTAB)
VALUE: CGS
DEPENDENCIES:(CGS,RESTORE,Preconditioner,#CURRENT#)(BiCG,HIDE,Preconditioner
,#CURRENT#)(BiCGSTAB,HIDE,Preconditioner,#CURRENT#)
HELP: Conjugate gradient squared (CGS) likely to be best choice.
QUESTION: Preconditioner#CB#(Vanilla,Point_Jacobi,Tridiagonal)
HELP: Tridiagonal fastest but uses most memory (reccomended) Vanilla
slowest
but requires least memory.
VALUE: Tridiagonal
QUESTION:Precision#CB#(Single,Double)
HELP: Internal precision of iterative solver, fastest is Double but
requires
more memory for vector storage. Matrix is held as single precision
VALUE: Double
QUESTION:Residual_error
VALUE: 1e-6
HELP: The smaller the value the more iterations required.
END GENERAL DATA
I select matrix solver as direct & fields hide OK I then accept data &
close. But if I open up data-problem data-matrix solver again then a
supposedly hidden field Preconditioner shows itself ?
Is this a bug that can only be fixed by upgrading?
Are comments allowed in a .prb file & if so how?
Thanks in advance
Mark
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.502 / Virus Database: 300 - Release Date: 18/07/2003
The information contained in this e-mail message (and any attachment
transmitted herewith) is privileged and confidential and is intended for
the
exclusive use of the addressee(s). If you are not an addressee, any
disclosure, reproduction, distribution or other dissemination or use of
this
communication is strictly prohibited. If you have received this
communication in error, please contact us immediately so that we can
correct
the error.
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
-
Ramon Ribó
[GiDlist] Searching the archives & .prb files
Hello,
You can search the list archives in:
http://gid.cimne.upc.es/pipermail/gidlist
Regards,
--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Mark Smith
Enviado el: miércoles, 30 de julio de 2003 11:59
Para: Gidlist (E-mail)
Asunto: [GiDlist] Searching the archives & .prb files
Is it possible to do a search on the gid list archives & if so how?
Is there any specific documentation on the use of SET HIDE RESTORE &
DEPENDENCIES as used in the .prb file with ver gid 6.3.0b, I have
downloaded the nastran problem type & looked at it's .prb file but I
have a problem with some of my QUESTION fields not hiding when they
should, see below .prb file
PROBLEM DATA
BOOK: Model Units
TITLE: Units
QUESTION: Units#CB#(m,mm)
VALUE: mm
HELP: Choose the units for the model
BOOK: Matrix Solver
TITLE: Type
QUESTION: Solution_Method#CB#(Direct,Iterative)
VALUE: Iterative
DEPENDENCIES:(Direct,RESTORE,LU,#CURRENT#,HIDE,Algorithm,#CURRENT#,HIDE,
Prec
onditioner,#CURRENT#,HIDE,Precision,#CURRENT#,HIDE,Residual_error,#CURRE
NT#)
(Iterative,HIDE,LU,#CURRENT#,RESTORE,Algorithm,#CURRENT#,RESTORE,Precisi
on,#
CURRENT#,RESTORE,Residual_error,#CURRENT#)
QUESTION: LU#CB#(Decomposition)
VALUE: Decomposition
QUESTION: Algorithm#CB#(CGS,BiCG,BiCGSTAB)
VALUE: CGS
DEPENDENCIES:(CGS,RESTORE,Preconditioner,#CURRENT#)(BiCG,HIDE,Preconditi
oner
,#CURRENT#)(BiCGSTAB,HIDE,Preconditioner,#CURRENT#)
HELP: Conjugate gradient squared (CGS) likely to be best choice.
QUESTION: Preconditioner#CB#(Vanilla,Point_Jacobi,Tridiagonal)
HELP: Tridiagonal fastest but uses most memory (reccomended) Vanilla
slowest but requires least memory.
VALUE: Tridiagonal
QUESTION:Precision#CB#(Single,Double)
HELP: Internal precision of iterative solver, fastest is Double but
requires more memory for vector storage. Matrix is held as single
precision
VALUE: Double
QUESTION:Residual_error
VALUE: 1e-6
HELP: The smaller the value the more iterations required.
END GENERAL DATA
I select matrix solver as direct & fields hide OK I then accept data &
close. But if I open up data-problem data-matrix solver again then a
supposedly hidden field Preconditioner shows itself ?
Is this a bug that can only be fixed by upgrading?
Are comments allowed in a .prb file & if so how?
Thanks in advance
Mark
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.502 / Virus Database: 300 - Release Date: 18/07/2003
The information contained in this e-mail message (and any attachment
transmitted herewith) is privileged and confidential and is intended for
the exclusive use of the addressee(s). If you are not an addressee, any
disclosure, reproduction, distribution or other dissemination or use of
this communication is strictly prohibited. If you have received this
communication in error, please contact us immediately so that we can
correct the error. _______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
You can search the list archives in:
http://gid.cimne.upc.es/pipermail/gidlist
Regards,
--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09
-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Mark Smith
Enviado el: miércoles, 30 de julio de 2003 11:59
Para: Gidlist (E-mail)
Asunto: [GiDlist] Searching the archives & .prb files
Is it possible to do a search on the gid list archives & if so how?
Is there any specific documentation on the use of SET HIDE RESTORE &
DEPENDENCIES as used in the .prb file with ver gid 6.3.0b, I have
downloaded the nastran problem type & looked at it's .prb file but I
have a problem with some of my QUESTION fields not hiding when they
should, see below .prb file
PROBLEM DATA
BOOK: Model Units
TITLE: Units
QUESTION: Units#CB#(m,mm)
VALUE: mm
HELP: Choose the units for the model
BOOK: Matrix Solver
TITLE: Type
QUESTION: Solution_Method#CB#(Direct,Iterative)
VALUE: Iterative
DEPENDENCIES:(Direct,RESTORE,LU,#CURRENT#,HIDE,Algorithm,#CURRENT#,HIDE,
Prec
onditioner,#CURRENT#,HIDE,Precision,#CURRENT#,HIDE,Residual_error,#CURRE
NT#)
(Iterative,HIDE,LU,#CURRENT#,RESTORE,Algorithm,#CURRENT#,RESTORE,Precisi
on,#
CURRENT#,RESTORE,Residual_error,#CURRENT#)
QUESTION: LU#CB#(Decomposition)
VALUE: Decomposition
QUESTION: Algorithm#CB#(CGS,BiCG,BiCGSTAB)
VALUE: CGS
DEPENDENCIES:(CGS,RESTORE,Preconditioner,#CURRENT#)(BiCG,HIDE,Preconditi
oner
,#CURRENT#)(BiCGSTAB,HIDE,Preconditioner,#CURRENT#)
HELP: Conjugate gradient squared (CGS) likely to be best choice.
QUESTION: Preconditioner#CB#(Vanilla,Point_Jacobi,Tridiagonal)
HELP: Tridiagonal fastest but uses most memory (reccomended) Vanilla
slowest but requires least memory.
VALUE: Tridiagonal
QUESTION:Precision#CB#(Single,Double)
HELP: Internal precision of iterative solver, fastest is Double but
requires more memory for vector storage. Matrix is held as single
precision
VALUE: Double
QUESTION:Residual_error
VALUE: 1e-6
HELP: The smaller the value the more iterations required.
END GENERAL DATA
I select matrix solver as direct & fields hide OK I then accept data &
close. But if I open up data-problem data-matrix solver again then a
supposedly hidden field Preconditioner shows itself ?
Is this a bug that can only be fixed by upgrading?
Are comments allowed in a .prb file & if so how?
Thanks in advance
Mark
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.502 / Virus Database: 300 - Release Date: 18/07/2003
The information contained in this e-mail message (and any attachment
transmitted herewith) is privileged and confidential and is intended for
the exclusive use of the addressee(s). If you are not an addressee, any
disclosure, reproduction, distribution or other dissemination or use of
this communication is strictly prohibited. If you have received this
communication in error, please contact us immediately so that we can
correct the error. _______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist