[GiDlist] Do extrude -> surface to volumes

[Christian Großmann]

Dear Gid-Users,

what I have is a surface-mesh. Now I want to copy this mesh by extruding
from surface- to volume-elements, but the surface-elements are no longer
nessesary. My question is, if there is any possibility to customize
gid, so that gid deletes the surface-elements by its own. Perhaps this
may be possible by changing some tcl-file like CopyMain.ui.tcl. But I
dont know how to do. I'll be thankful for any suggestions.

best regards
Christian Großmann

[rafael]

Hello, GiD users!

I have following situation:
A shell script generates a batch file for GiD (see below).
This batch file should read a number of result files and create a
animation file like animation.gif.

My two problems running the batch file are:

1. GiD executes the batch files lines without waiting for the result of
previous line. So commands are overlapped and animation is not
generated. Some idea how to solve the problem?

2. Once (1.) is solved. Is it possible to run GiD without window
(background running) for that purpose?

Thank you in advance for any suggestion
Rafael

------------------------------------------------------------------------

escape escape escape escape
postprocess
escape escape escape escape
utilities animationfile format gif
escape escape escape escape
utilities animationfile start fillingrate.gif
escape escape escape escape
results contoptions numberofcolors 1
escape escape escape escape
hardcopy options showlegends no

escape escape escape escape
files read /userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000000.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read /userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000010.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read /userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000020.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read /userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000030.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read /userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000040.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read /userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000050.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read /userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000060.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
utilities animationfile end

[Miguel A. Pasenau de Riera]

Hello, Rafael,
As i see from your script file, it seems that you use a different mesh for
every simulation step. Is that right?
I'm implementing this into GiD, and a 'very preliminary' version is
incorporated into GiD v. 7.5.3b.

If you enable the right buttons menu (just by clicking with the right mouse
button over a toolbar, a menu with the option 'configure toolbars' appears; in
this window select the 'right buttons' and click on the radio button 'outside'
or 'inside, so that this right buttons menu pops up), after changing to post
process,please select the 'Files-ReadMultiple'. In the file dialog box, now
select the files (with click and shift-click/ctrl-click) you want GiD to read,
for instance from 'aluwall at 000000.post.res' until 'aluwall at 000060.post.res'.

When GiD has read the files, then you can select, from the top menu,
'Results-Smooth Contour Fill-Filling rate', pop up the 'Windows-Animate...'
window and save the animation in 'gif' format'.

This an 'alpha' feature, and some things (like cutting the meshes of all steps,
maintain the visualization of the meshes across all the steps will be ready for
the next beta which will be available very soon).
In the meantime, i'll be happy for every 'fault' you tell me, and i'll check
your script file.

Thanks in advance.

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu] En nombre de
rafael
Enviado el: domingo, 20 de febrero de 2005 12:18
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] batch file for animation file

Hello, GiD users!

I have following situation:
A shell script generates a batch file for GiD (see below).
This batch file should read a number of result files and create a animation
file like animation.gif.

My two problems running the batch file are:

1. GiD executes the batch files lines without waiting for the result of
previous line. So commands are overlapped and animation is not generated. Some
idea how to solve the problem?

2. Once (1.) is solved. Is it possible to run GiD without window (background
running) for that purpose?

Thank you in advance for any suggestion
Rafael

-----------------------------------------------------------------------
-

escape escape escape escape
postprocess
escape escape escape escape
utilities animationfile format gif
escape escape escape escape
utilities animationfile start fillingrate.gif escape escape escape
escape results contoptions numberofcolors 1 escape escape escape escape
hardcopy options showlegends no

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000000.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000010.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000020.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000030.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000040.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000050.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000060.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
utilities animationfile end



_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

[Rafael Doig]

Thank you Miguel for your email.

Yes, my mesh is "moving" with each simulation step. So, I have at every
step(certain number of them) a mesh file and a result file.

I tested before and also now again the feature "ReadMultiple" in GiD v.
7.5.3b for Linux.
GiD read all files. However, doing the animation, I get only the first
picture in a gif file. Not an animation of all result files.

Now coming back to my batch file. I found why it did not work sometimes:
Reasons:
Case 1:
If the gif file is existing, GiD asks about overwriting or not in the
lines above the command line. Unfortunately, I have no chance to tell
GiD nothing, because it's busy finishing the batch file. So now,
everytime I delete the gif file and do it again. It works nice.
It would be nice, if you can put a checkbox in the animation window like
"overwrite animation file if existing" or something like this.

Case 2:
When I am using GiD on the calculation server directly the batch file
works fine.
When I am using GiD trough a (remote) ssh connection, then the commands
in the batch file get overlapped.
Nice if there is a GiD command for batch files to sleep for some time. Like:

escape escape escape escape
postprocess
escape escape escape escape
sleep 100 ## sleep executing the batch file until commands before got
finished.
.
.
.


Thank you again
I will be watching the new feature release!

Regards,
Rafael




Miguel A. Pasenau de Riera wrote:

Hello, Rafael,
As i see from your script file, it seems that you use a different mesh for
every simulation step. Is that right?
I'm implementing this into GiD, and a 'very preliminary' version is
incorporated into GiD v. 7.5.3b.

If you enable the right buttons menu (just by clicking with the right mouse
button over a toolbar, a menu with the option 'configure toolbars' appears; in
this window select the 'right buttons' and click on the radio button 'outside'
or 'inside, so that this right buttons menu pops up), after changing to post
process,please select the 'Files-ReadMultiple'. In the file dialog box, now
select the files (with click and shift-click/ctrl-click) you want GiD to read,
for instance from 'aluwall at 000000.post.res' until 'aluwall at 000060.post.res'.

When GiD has read the files, then you can select, from the top menu,
'Results-Smooth Contour Fill-Filling rate', pop up the 'Windows-Animate...'
window and save the animation in 'gif' format'.

This an 'alpha' feature, and some things (like cutting the meshes of all steps,
maintain the visualization of the meshes across all the steps will be ready for
the next beta which will be available very soon).
In the meantime, i'll be happy for every 'fault' you tell me, and i'll check
your script file.

Thanks in advance.

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu] En nombre de
rafael
Enviado el: domingo, 20 de febrero de 2005 12:18
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] batch file for animation file

Hello, GiD users!

I have following situation:
A shell script generates a batch file for GiD (see below).
This batch file should read a number of result files and create a animation
file like animation.gif.

My two problems running the batch file are:

1. GiD executes the batch files lines without waiting for the result of
previous line. So commands are overlapped and animation is not generated. Some
idea how to solve the problem?

2. Once (1.) is solved. Is it possible to run GiD without window (background
running) for that purpose?

Thank you in advance for any suggestion
Rafael



-----------------------------------------------------------------------
-

escape escape escape escape
postprocess
escape escape escape escape
utilities animationfile format gif
escape escape escape escape
utilities animationfile start fillingrate.gif escape escape escape
escape results contoptions numberofcolors 1 escape escape escape escape
hardcopy options showlegends no

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000000.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000010.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000020.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000030.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000040.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000050.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000060.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5 escape escape escape
escape results contoptions setminoptions outmincolor transparent escape
escape escape escape utilities animationfile addframe

escape escape escape escape
utilities animationfile end





_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist



_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

[escolano]

How are you reading the batch file?
options are:
a) Utilitities-Graphical-Read batch window
b) Files-Import-Batch file
c) gid.exe -b+g "batchfile"

Probably you are using the 'b' option. Try also 'a'

Is it possible to run GiD from the command line (read GiD help about
'Invoking GiD').
The -n parameter is to start without window
gid.exe -b "batchfile" -n
but then it's not possible to create any image (or animation). It's
necessary to have a window, and activate also graphics +g
gid.exe -b+g "batchfile"

What's your GiD version? (Help-About)

Enrique
----- Original Message -----
From: "rafael" rafadoig at hiroshima-u.ac.jp
To: gidlist at gatxan.cimne.upc.es
Sent: Sunday, February 20, 2005 12:17 PM
Subject: [GiDlist] batch file for animation file


Hello, GiD users!

I have following situation:
A shell script generates a batch file for GiD (see below).
This batch file should read a number of result files and create a
animation file like animation.gif.

My two problems running the batch file are:

1. GiD executes the batch files lines without waiting for the result of
previous line. So commands are overlapped and animation is not
generated. Some idea how to solve the problem?

2. Once (1.) is solved. Is it possible to run GiD without window
(background running) for that purpose?

Thank you in advance for any suggestion
Rafael

------------------------------------------------------------------------

escape escape escape escape
postprocess
escape escape escape escape
utilities animationfile format gif
escape escape escape escape
utilities animationfile start fillingrate.gif
escape escape escape escape
results contoptions numberofcolors 1
escape escape escape escape
hardcopy options showlegends no

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000000.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000010.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000020.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000030.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000040.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000050.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read
/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000060.post.res
escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
utilities animationfile end



_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

[Rafael Doig]

Thanks Enrique.

yes, I read the GiD help about invoking GiD. I was wondering if for
creating an image or animation was possible with parameter -n or -n2.
Now, I know: that is not possible.

To your option question:
Local:
a) works perfect
b) does not work (commands get overlapped)
c) works perfect

Unfortunately very often I have to finish some work out of office. So i
use ssh.
Remote:
a) does not work*
b) does not work*
c) does not work*

*that executing of batch file lines is faster than the processing time
of each line itself. For example. In my batch file, the command
"postprocess" take (remotly -ssh connection) long time, during this time
other batch file lines are also executed.

I guess it is a speed problem. That is why I was asking for a "sleep"
command so that I can break or sleep my batch file at some places.

Thank again
Rafael



Enrique Escolano wrote:

How are you reading the batch file?
options are:
a) Utilitities-Graphical-Read batch window
b) Files-Import-Batch file
c) gid.exe -b+g "batchfile"

Probably you are using the 'b' option. Try also 'a'

Is it possible to run GiD from the command line (read GiD help about
'Invoking GiD').
The -n parameter is to start without window
gid.exe -b "batchfile" -n
but then it's not possible to create any image (or animation). It's
necessary to have a window, and activate also graphics +g
gid.exe -b+g "batchfile"

What's your GiD version? (Help-About)

Enrique
----- Original Message -----
From: "rafael" rafadoig at hiroshima-u.ac.jp
To: gidlist at gatxan.cimne.upc.es
Sent: Sunday, February 20, 2005 12:17 PM
Subject: [GiDlist] batch file for animation file




Hello, GiD users!

I have following situation:
A shell script generates a batch file for GiD (see below).
This batch file should read a number of result files and create a
animation file like animation.gif.

My two problems running the batch file are:

1. GiD executes the batch files lines without waiting for the result of
previous line. So commands are overlapped and animation is not
generated. Some idea how to solve the problem?

2. Once (1.) is solved. Is it possible to run GiD without window
(background running) for that purpose?

Thank you in advance for any suggestion
Rafael



------------------------------------------------------------------------

escape escape escape escape
postprocess
escape escape escape escape
utilities animationfile format gif
escape escape escape escape
utilities animationfile start fillingrate.gif
escape escape escape escape
results contoptions numberofcolors 1
escape escape escape escape
hardcopy options showlegends no

escape escape escape escape
files read


/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000000.post.res


escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read


/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000010.post.res


escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read


/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000020.post.res


escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read


/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000030.post.res


escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read


/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000040.post.res


escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read


/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000050.post.res


escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
files read


/userA/rafael/Models/aluwall.gid/analysis2/aluwall at 000060.post.res


escape escape escape escape
rotate angle 270
escape escape escape escape
zoom points 0 0 0 4 10 0
escape escape escape escape
results smoothcontourfill Filling_rate
escape escape escape escape
results contoptions setminoptions setvalue 0.5
escape escape escape escape
results contoptions setminoptions outmincolor transparent
escape escape escape escape
utilities animationfile addframe

escape escape escape escape
utilities animationfile end




_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist




_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

[escolano]

There is a very bad idea to directly directly modify the GiD scripts,
because the next update you will lost your own changes.

Using the last GiD beta versions, it's possible to customize a "macros
toolbar" to call your own Tcl/Tk procedure from a button.

(but I think that is not interesting to create your own copy window than
after extrude, only to delete undesired elements)

Enrique
----- Original Message -----
From: "Christian Großmann" christian.grossmann at rub.de
To: gidlist at gatxan.cimne.upc.es
Sent: Saturday, February 19, 2005 5:34 PM
Subject: [GiDlist] Do extrude - surface to volumes


Dear Gid-Users,

what I have is a surface-mesh. Now I want to copy this mesh by extruding
from surface- to volume-elements, but the surface-elements are no longer
nessesary. My question is, if there is any possibility to customize
gid, so that gid deletes the surface-elements by its own. Perhaps this
may be possible by changing some tcl-file like CopyMain.ui.tcl. But I
dont know how to do. I'll be thankful for any suggestions.

best regards
Christian Großmann




_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist