displaying two different meshes simultaneously in GiD

Moderator: GiD Team

Post Reply
aortizb
Posts: 10
Joined: Mon Dec 12, 2016 6:35 pm
Location: Santiago, Chile.
Contact:

displaying two different meshes simultaneously in GiD

Post by aortizb »

Hello, I am working with material point method. To plot results I define a mesh based on "Points" (the element type is "Point" in the post.msh file). All the interesting variables are plotted at these points. However,in conjunction with the "Point" mesh, I would like to visualize an underlying mesh of four-node quadrilaterals. No values for the variables will be associated with the four-node quadrilateral. Is this possible in GiD?

Thanks,
Alejandro.
User avatar
escolano
Posts: 1933
Joined: Sun Sep 05, 1982 10:51 pm

Re: displaying two different meshes simultaneously in GiD

Post by escolano »

Yes, you can write more than one mesh in the .post.msh file

MESH "FinitePoint2D 1" dimension 3 ElemType Point Nnode 1
Coordinates
...
End coordinates

Elements
...
End elements

MESH "SurfaceMesh 1" dimension 3 ElemType Quadrilateral Nnode 4
Coordinates
...
End coordinates

Elements
...
End elements

and define the nodal results only in some nodes, e.g. the ones of the 'Point' mesh
(the elements with nodes without result will be drawn transparent when drawing a contour filled result)
Advika
Posts: 1
Joined: Thu Oct 26, 2023 6:01 am

Re: displaying two different meshes simultaneously in GiD

Post by Advika »

Hello Friends,YouTube Vanced
I'm working with the Material Point Method, and I'm using a mesh defined by "Points" with the element type as "Point" in the post.msh file to plot various variables. However, I also want to display an underlying mesh of four-node quadrilaterals alongside the "Point" mesh. The quadrilaterals won't have any associated variable values. Is it possible to do this in GiD?
User avatar
escolano
Posts: 1933
Joined: Sun Sep 05, 1982 10:51 pm

Re: displaying two different meshes simultaneously in GiD

Post by escolano »

Yes, you can define in the file .post.msh a mesh of quadrilaterals without any result on them.
Samuel420
Posts: 1
Joined: Sat Aug 24, 2024 8:49 pm

Re: displaying two different meshes simultaneously in GiD

Post by Samuel420 »

Hello, I’m working with the Material Point Method and need to plot results using a mesh defined with "Points" (element type "Point" in the post.msh file). While the variables of interest are plotted at these points, I would also like to visualize an underlying mesh of four-node quadrilaterals. Although no values will be associated with the quadrilaterals, is it possible to display this additional mesh in GiD?
YouTube Vanced
User avatar
escolano
Posts: 1933
Joined: Sun Sep 05, 1982 10:51 pm

Re: displaying two different meshes simultaneously in GiD

Post by escolano »

the answer is the same of the previous question.
Post Reply