[GiDlist] problem about scale factor of deformed mesh

GiDList Archive 2014
1

Hi, all,

I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID.
If the answer is yes, how to achieve it? As far as I understand, it seems
GID can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.

Bests,
Gangjin
-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140630/b7a40041/attachment.htm

2

The deformation factor scale is a single uniform value.

Maybe it is interesting for you to know that the ‘Copy’ window in
postprocess could do a ‘Scale’ transformation of the mesh, with different
scale values on each x, y, z direction





De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Gangjin Li
Enviado el: lunes, 30 de junio de 2014 15:23
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] problem about scale factor of deformed mesh



Hi, all,



I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID. If
the answer is yes, how to achieve it? As far as I understand, it seems GID
can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.



Bests,

Gangjin

-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140630/04359bc8/attachment.htm

3

Thank you so much, Enrique. Your reply is helpful for me.

Regards,
Gangjin


On Mon, Jun 30, 2014 at 10:37 AM, Enrique Escolano escolano at cimne.upc.edu
wrote:

The deformation factor scale is a single uniform value.
Maybe it is interesting for you to know that the ‘Copy’ window in
postprocess could do a ‘Scale’ transformation of the mesh, with different
scale values on each x, y, z direction




De: gidlist-bounces at listas.cimne.upc.edu [mailto:
gidlist-bounces at listas.cimne.upc.edu] *En nombre de *Gangjin Li
Enviado el: lunes, 30 de junio de 2014 15:23
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] problem about scale factor of deformed mesh


Hi, all,


I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID.
If the answer is yes, how to achieve it? As far as I understand, it seems
GID can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.


Bests,
Gangjin

GiDlist mailing list
GiDlist at listas.cimne.upc.edu
_http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_

-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140630/eb4a96f9/attachment.htm

4

Hi, Enrique,

I checked the reference manual and GID itself. It seems the ‘scale
transformation’ is only accessible in pre-process rather than
post-process…Is there any other way in which the deformation mesh with
different scale factors in two directions in post-process stage can be
achieved? I will appreciate your help.

Regards,
Gangjin


On Mon, Jun 30, 2014 at 10:52 AM, Gangjin Li ligangjin87 at gmail.com wrote:

Thank you so much, Enrique. Your reply is helpful for me.
Regards,
Gangjin

On Mon, Jun 30, 2014 at 10:37 AM, Enrique Escolano escolano at cimne.upc.edu
wrote:
The deformation factor scale is a single uniform value.
Maybe it is interesting for you to know that the ‘Copy’ window in
postprocess could do a ‘Scale’ transformation of the mesh, with different
scale values on each x, y, z direction




De: gidlist-bounces at listas.cimne.upc.edu [mailto:
gidlist-bounces at listas.cimne.upc.edu] *En nombre de *Gangjin Li
Enviado el: lunes, 30 de junio de 2014 15:23
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] problem about scale factor of deformed mesh


Hi, all,


I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID.
If the answer is yes, how to achieve it? As far as I understand, it seems
GID can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.


Bests,
Gangjin

GiDlist mailing list
GiDlist at listas.cimne.upc.edu
_http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_


-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140701/27a591af/attachment.htm

5

The transformation scale is also in postprocess in latest GiD versions,
download the 11.1.9.d developer version
http://www.gidhome.com/download/developer-versions

In doesn’t exists any other option to scale the postprocess mesh



De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Gangjin Li
Enviado el: miércoles, 2 de julio de 2014 3:40
Para: gidlist at listas.cimne.upc.edu
Asunto: Re: [GiDlist] problem about scale factor of deformed mesh



Hi, Enrique,



I checked the reference manual and GID itself. It seems the ‘scale
transformation’ is only accessible in pre-process rather than
post-process…Is there any other way in which the deformation mesh with
different scale factors in two directions in post-process stage can be
achieved? I will appreciate your help.



Regards,

Gangjin



On Mon, Jun 30, 2014 at 10:52 AM, Gangjin Li ligangjin87 at gmail.com wrote:

Thank you so much, Enrique. Your reply is helpful for me.



Regards,

Gangjin



On Mon, Jun 30, 2014 at 10:37 AM, Enrique Escolano escolano at cimne.upc.edu
wrote:

The deformation factor scale is a single uniform value.

Maybe it is interesting for you to know that the ‘Copy’ window in
postprocess could do a ‘Scale’ transformation of the mesh, with different
scale values on each x, y, z direction





De: gidlist-bounces at listas.cimne.upc.edu
[mailto:gidlist-bounces at listas.cimne.upc.edu] En nombre de Gangjin Li
Enviado el: lunes, 30 de junio de 2014 15:23
Para: gidlist at listas.cimne.upc.edu
Asunto: [GiDlist] problem about scale factor of deformed mesh



Hi, all,



I am wondering if it is possible to set different scale factors for
deformation mesh in two directions, i.e. x and y, of a 2D picture in GID. If
the answer is yes, how to achieve it? As far as I understand, it seems GID
can only assign an uniform scale factor for both directions in the same
picture. Is it right? Many thanks in advance for the help.



Bests,

Gangjin


\

GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist





-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140702/4978ae65/attachment.htm