Fw: [GiDlist] Question about postprocess mesh format: elemen

GiDList Archive 2013 - 2005
1

It is valid to have non sequential numeration for nodes/elements and also
jumps (unused numbers)

The only think you must be careful is avoid to use very big numbers, because
with the current implementation
a consecutive vector with the maximum number is allocated, and you can waste
a lot of memory !!

Regards

Enrique Escolano

----- Original Message -----
From: “Claudio AC Silva” cacs at thorus-scisoft.com.br
To: gidlist at gatxan.cimne.upc.edu
Sent: Friday, May 29, 2009 3:54 AM
Subject: [GiDlist] Question about postprocess mesh format: element numbers


Hello,
I have another question about the postprocess mesh format:
- the ‘element number’ in the elements section must be sequential and
in
increasing order in each mesh? What about jumps in the sequence?
Claudio
–

Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333)
CAE Solutions
Thorus Scisoft - www.thorus-scisoft.com.br
Fone:+55 019 3705-4002

This message is intended solely for the use of its addressee and may
contain
privileged or confidential information. If you are not the addressee you
should not distribute, copy or file this message. In this case, please
notify
the sender and destroy its contents immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter
informações privilegiadas e confidenciais. Se você não é o destinatário
não
deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.

\

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

2

I got the idea.

Thank you, Enrico.

It is valid to have non sequential numeration for nodes/elements and also
jumps (unused numbers)
The only think you must be careful is avoid to use very big numbers, because
with the current implementation
a consecutive vector with the maximum number is allocated, and you can waste
a lot of memory !!
Regards
Enrique Escolano
----- Original Message -----
From: “Claudio AC Silva” cacs at thorus-scisoft.com.br
To: gidlist at gatxan.cimne.upc.edu
Sent: Friday, May 29, 2009 3:54 AM
Subject: [GiDlist] Question about postprocess mesh format: element numbers


Hello,
I have another question about the postprocess mesh format:
- the ‘element number’ in the elements section must be sequential and
in
increasing order in each mesh? What about jumps in the sequence?
Claudio
–

Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333)
CAE Solutions
Thorus Scisoft - www.thorus-scisoft.com.br
Fone:+55 019 3705-4002

This message is intended solely for the use of its addressee and may
contain
privileged or confidential information. If you are not the addressee you
should not distribute, copy or file this message. In this case, please
notify
the sender and destroy its contents immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter
informações privilegiadas e confidenciais. Se você não é o destinatário
não
deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.

\

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

\

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_


\

Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333)
CAE Solutions
Thorus Scisoft - www.thorus-scisoft.com.br
Fone:+55 019 3287-7060 r:251, FAX: +55 019 3287-7150

This message is intended solely for the use of its addressee and may contain
privileged or confidential information. If you are not the addressee you
should not distribute, copy or file this message. In this case, please notify
the sender and destroy its contents immediately.

Esta mensagem é para uso exclusivo de seu destinatário e pode conter
informações privilegiadas e confidenciais. Se você não é o destinatário, não
deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.

3

Yes,
node and element numbers can be non sequential, but you must take care of
following:

  • for node numbers, do not use a very big number, because, as Enrique sais,
    is allocates the whole vector for node_number_1 until biggest_node_number.

  • for both, nodes and elements, it is preferable to use unique numbers,
    i.e., do not use the same element number, for instance, for a triangle and a
    tetrahedron.

Miguel Pasenau

\

Miguel Pasenau @: miguel at cimne.upc.edu
Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n
08034 - Barcelona ( SPAIN)
T: +34 3 93 401 74 03 F: +34 3 93 401 65 17

IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.


-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu] En nombre de
Enrique Escolano
Enviado el: martes, 02 de junio de 2009 23:33
Para: gidlist at gatxan.cimne.upc.edu
Asunto: Fw: [GiDlist] Question about postprocess mesh format: element
numbers

It is valid to have non sequential numeration for nodes/elements and also
jumps (unused numbers)

The only think you must be careful is avoid to use very big numbers, because

with the current implementation
a consecutive vector with the maximum number is allocated, and you can waste

a lot of memory !!

Regards

Enrique Escolano

----- Original Message -----
From: “Claudio AC Silva” cacs at thorus-scisoft.com.br
To: gidlist at gatxan.cimne.upc.edu
Sent: Friday, May 29, 2009 3:54 AM
Subject: [GiDlist] Question about postprocess mesh format: element numbers


Hello,
I have another question about the postprocess mesh format:
- the ‘element number’ in the elements section must be sequential and
in
increasing order in each mesh? What about jumps in the sequence?
Claudio
–

Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333)
CAE Solutions
Thorus Scisoft - www.thorus-scisoft.com.br
Fone:+55 019 3705-4002

This message is intended solely for the use of its addressee and may
contain
privileged or confidential information. If you are not the addressee you
should not distribute, copy or file this message. In this case, please
notify
the sender and destroy its contents immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter
informações privilegiadas e confidenciais. Se você não é o destinatário
não
deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.

\

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

\

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
http://gid.cimne.upc.es/mailman/listinfo/gidlist

4

Hello GiD team,

I’m stil using GiD 8.0.2.

Let me know how I can start up two GiD sessions simultaneously
without interfering each other, e.g. foo.gid and goo.gid.

My wish is to view some gid geometry in foo.gid as a reference
and to work new model in another goo.gid window.

Best regards,

HEMMI, Shigeru
ITOCHU Techno-Solutions Corporation (CTC)
2-5, Kasumigaseki 3-chome, Chiyoda-ku,
Tokyo 100-6080, Japan

5

I don’t understand what’s the problem:
You can start two GiDs with two different models without any interference
not?

Enrique

----- Original Message -----
From: “HEMMI, Shigeru” shigeru.hemmi at ctc-g.co.jp
To: gidlist at gatxan.cimne.upc.edu
Sent: Wednesday, June 03, 2009 9:40 AM
Subject: [GiDlist] Simulaneous two GiD sessions


Hello GiD team,
I’m stil using GiD 8.0.2.
Let me know how I can start up two GiD sessions simultaneously
without interfering each other, e.g. foo.gid and goo.gid.
My wish is to view some gid geometry in foo.gid as a reference
and to work new model in another goo.gid window.
Best regards,
HEMMI, Shigeru
ITOCHU Techno-Solutions Corporation (CTC)
2-5, Kasumigaseki 3-chome, Chiyoda-ku,
Tokyo 100-6080, Japan

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

6

Thanks for the quick reply.

To be honest, sorry I did not test to start two GiD sessions yet.

I know that GiD using the Temp directory, for example,
c:/Documents and Settings/$(my user name)/Local Settings/Temp/gid2.
If one GiD session locks some files in the Temp, I am guessing another
GiD session will meet some difficulty. Not?

Best regards,



Enrique Escolano Wrote:
I don’t understand what’s the problem:
You can start two GiDs with two different models without any
interference not?
Enrique
----- Original Message ----- From: “HEMMI, Shigeru”
shigeru.hemmi at ctc-g.co.jp
To: gidlist at gatxan.cimne.upc.edu
Sent: Wednesday, June 03, 2009 9:40 AM
Subject: [GiDlist] Simulaneous two GiD sessions

Hello GiD team,
I’m stil using GiD 8.0.2.
Let me know how I can start up two GiD sessions simultaneously
without interfering each other, e.g. foo.gid and goo.gid.
My wish is to view some gid geometry in foo.gid as a reference
and to work new model in another goo.gid window.
Best regards,
HEMMI, Shigeru
ITOCHU Techno-Solutions Corporation (CTC)
2-5, Kasumigaseki 3-chome, Chiyoda-ku,
Tokyo 100-6080, Japan

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

7

You can start as many GiD as you want without interferences, they will use
different temporary folders.

The only interference is that the gid.ini user preferences are shared by all
GiD’s
(GiD read this preferences file when starting, and save it when exit)

Enrique
----- Original Message -----
From: “HEMMI, Shigeru” shigeru.hemmi at ctc-g.co.jp
To: gidlist at gatxan.cimne.upc.edu
Sent: Wednesday, June 03, 2009 11:39 AM
Subject: Re: [GiDlist] Simulaneous two GiD sessions


Thanks for the quick reply.
To be honest, sorry I did not test to start two GiD sessions yet.
I know that GiD using the Temp directory, for example,
c:/Documents and Settings/$(my user name)/Local Settings/Temp/gid2.
If one GiD session locks some files in the Temp, I am guessing another
GiD session will meet some difficulty. Not?
Best regards,


Enrique Escolano Wrote:
I don’t understand what’s the problem:
You can start two GiDs with two different models without any
interference not?
Enrique
----- Original Message ----- From: “HEMMI, Shigeru”
shigeru.hemmi at ctc-g.co.jp
To: gidlist at gatxan.cimne.upc.edu
Sent: Wednesday, June 03, 2009 9:40 AM
Subject: [GiDlist] Simulaneous two GiD sessions

Hello GiD team,
I’m stil using GiD 8.0.2.
Let me know how I can start up two GiD sessions simultaneously
without interfering each other, e.g. foo.gid and goo.gid.
My wish is to view some gid geometry in foo.gid as a reference
and to work new model in another goo.gid window.
Best regards,
HEMMI, Shigeru
ITOCHU Techno-Solutions Corporation (CTC)
2-5, Kasumigaseki 3-chome, Chiyoda-ku,
Tokyo 100-6080, Japan

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

8

Dear Enrique Escolano,

Thank you very much for the answer.
I can proceed my work without worrying anything.

Best regards,


Enrique Escolano wrote:
You can start as many GiD as you want without interferences, they will
use different temporary folders.
The only interference is that the gid.ini user preferences are shared by
all GiD’s
(GiD read this preferences file when starting, and save it when exit)
Enrique
----- Original Message ----- From: “HEMMI, Shigeru”
shigeru.hemmi at ctc-g.co.jp
To: gidlist at gatxan.cimne.upc.edu
Sent: Wednesday, June 03, 2009 11:39 AM
Subject: Re: [GiDlist] Simulaneous two GiD sessions

Thanks for the quick reply.
To be honest, sorry I did not test to start two GiD sessions yet.
I know that GiD using the Temp directory, for example,
c:/Documents and Settings/$(my user name)/Local Settings/Temp/gid2.
If one GiD session locks some files in the Temp, I am guessing another
GiD session will meet some difficulty. Not?
Best regards,


Enrique Escolano Wrote:
I don’t understand what’s the problem:
You can start two GiDs with two different models without any
interference not?
Enrique
----- Original Message ----- From: “HEMMI, Shigeru”
shigeru.hemmi at ctc-g.co.jp
To: gidlist at gatxan.cimne.upc.edu
Sent: Wednesday, June 03, 2009 9:40 AM
Subject: [GiDlist] Simulaneous two GiD sessions

Hello GiD team,
I’m stil using GiD 8.0.2.
Let me know how I can start up two GiD sessions simultaneously
without interfering each other, e.g. foo.gid and goo.gid.
My wish is to view some gid geometry in foo.gid as a reference
and to work new model in another goo.gid window.
Best regards,
HEMMI, Shigeru
ITOCHU Techno-Solutions Corporation (CTC)
2-5, Kasumigaseki 3-chome, Chiyoda-ku,
Tokyo 100-6080, Japan

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_

9

Muchas felicidades por el lanzamiento de la versión beta de Gid para MacOSX, lo he estado probando y se vé bastante estable, mucho más en comparación con la versión 7.2 basada en X11.Aunque aún no me considero un usuario experto de GID como la mayoría que consulta por medio de este foro, pero si me creo capaz de poder encontrar bugs que sean propios de esta versión, los cuales trataré de hacérselos llegar a la brevedad posible.Enhorabuena muchachos!

More than messages–check out the rest of the Windows Live™.

-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090603/906f7393/attachment.htm

10

Hello,

As Jesus already said, we released a few days ago the first beta version of
GiD for Mac OS X using Apple’s Aqua interface. The previous X11 interface
has been dropped out in favour of Mac OS X’s native interface.



This version is a x86 32bit one and was build on a Intel Mac-mini with Mac
OS X 10.5.6



You can download it from our web site:

(Download – GiD beta versions – Other Systems)



http://www.gidhome.com/download/do07.html
http://www.gidhome.com/download/do07.html

(+Other Systems – Mac OS X)



Or directly from:




ftp://gid.cimne.upc.es/pub/gid_adds/Other_Systems/MacOSX/GiD-9.2.0b-Install
.dmg
ftp://gid.cimne.upc.es/pub/gid_adds/Other_Systems/MacOSX/GiD-9.2.0b-Install.
dmg



You can also get a one-month free password from our web page:
http://www.gidhome.com/password/pa09_1.html
http://www.gidhome.com/password/pa09_1.html



If you have any suggestion, comments or you find any problems, please let us
know about them.



Miguel Pasenau

The GiD Team




\

Miguel Pasenau @: miguel at cimne.upc.edu
Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n
08034 - Barcelona ( SPAIN)
T: +34 3 93 401 74 03 F: +34 3 93 401 65 17

IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.

De: gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu] En nombre de
Jesus F Gracia
Enviado el: miércoles, 03 de junio de 2009 17:13
Para: gidlist at gatxan.cimne.upc.edu
Asunto: [GiDlist] Gid 9.2b para Mac OSX



Muchas felicidades por el lanzamiento de la versión beta de Gid para MacOSX,
lo he estado probando y se vé bastante estable, mucho más en comparación con
la versión 7.2 basada en X11.

Aunque aún no me considero un usuario experto de GID como la mayoría que
consulta por medio de este foro, pero si me creo capaz de poder encontrar
bugs que sean propios de esta versión, los cuales trataré de hacérselos
llegar a la brevedad posible.

Enhorabuena muchachos!


\

check out the rest of the Windows Live™. More than mail–Windows Live™ goes
way beyond your inbox. More than
Experience the Power of AI with Windows 11 OS, Computers & Apps | Microsoft Windows messages

-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090605/88f9da8d/attachment.htm

11

This is a minor bug I found on post-processing vector data. When you try to draw any vector data (using contour fill, iso-lines, etc) the menu does not refresh it contents unless you click an area outside GID (i.e., desktop). But after the first attempt the menu does not refresh at all, so you need to exit post-process and reenter again.


Included: Gid Problem Type (2d_Potential_Flow.gid.zip), Example with results (2dvalvle_2gid.zip) and a video showing this problem (GidBug01.m4v).


Please also let me know if I can send large file to this email address for future bug report, or If you have a special repository.


thank you

Drag n’ drop—Get easy photo sharing with Windows Live™ Photos.

-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090606/4afa6a3f/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed…
Name: 2D_Potential_Flow.gid.zip
Type: application/zip
Size: 53766 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090606/4afa6a3f/attachment.zip
-------------- next part --------------
A non-text attachment was scrubbed…
Name: 2dvalvle_2.gid.zip
Type: application/zip
Size: 39460 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090606/4afa6a3f/attachment-0001.zip
-------------- next part --------------
A non-text attachment was scrubbed…
Name: GidBug01.m4v
Type: video/x-m4v
Size: 2211810 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090606/4afa6a3f/attachment.bin

12

Hello,

Thanks for the report.

I’m on it, but it seems that the solution is not trivial.



Miguel Pasenau


\

Miguel Pasenau @: miguel at cimne.upc.edu
Despacho C2, Edifico C1, Campus Norte UPC, c/ Gran Capitán s/n
08034 - Barcelona ( SPAIN)
T: +34 3 93 401 74 03 F: +34 3 93 401 65 17

IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially
and stored in a file property of CIMNE in order to manage corporate
communications. You may exercise the right of access, rectification,
deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 -
Campus Norte UPC, 08034 Barcelona, Spain.

De: gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu.gid.cimne.upc.edu] En nombre de
Jesus F Gracia
Enviado el: sábado, 06 de junio de 2009 20:15
Para: gidlist at gatxan.cimne.upc.edu
Asunto: [GiDlist] Mac OSX: Fail to update menus in postprocess



This is a minor bug I found on post-processing vector data. When you try to
draw any vector data (using contour fill, iso-lines, etc) the menu does not
refresh it contents unless you click an area outside GID (i.e., desktop).
But after the first attempt the menu does not refresh at all, so you need to
exit post-process and reenter again.



Included: Gid Problem Type (2d_Potential_Flow.gid.zip), Example with results
(2dvalvle_2gid.zip) and a video showing this problem (GidBug01.m4v).



Please also let me know if I can send large file to this email address for
future bug report, or If you have a special repository.



thank you


\

What can you do with the new Windows Live? Find
Experience the Power of AI with Windows 11 OS, Computers, & Apps | Microsoft Windows out

-------------- next part --------------
An HTML attachment was scrubbed…
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20090611/6cc0fa3b/attachment.htm

13

I would like to know the local coordinates of the vertices of the
pyramid that is shown in the section “Postprocess results format:
ProjectName.post.res” of the user manual. Only the coordinates of the
internal Gauss points are shown there. I need to know those coordinates
in order to transform the local coordinates of the Gauss points of my
solver to the local coordinates used by GiD. The local coordinate system
is not also shown, contrary to the other element shapes.

Thank you in advance,
Cláudio

–

Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333)
CAE Solutions
Thorus Scisoft - www.thorus-scisoft.com.br
Fone:+55 019 3705-4002

This message is intended solely for the use of its addressee and may contain privileged or confidential information. If you are not the addressee you should not distribute, copy or file this message. In this case, please notify the sender and destroy its contents immediately.

Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações privilegiadas e confidenciais. Se você não é o destinatário não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor, notifique o remetente da mesma e destrua imediatamente a mensagem.

14

The local coordinates of the pyramid vertex are:

-1 -1 -1
1 -1 -1
1 1 -1
-1 1 -1
0 0 1

----- Original Message -----
From: “Claudio AC Silva” cacs at thorus-scisoft.com.br
To: gidlist at gatxan.cimne.upc.edu
Sent: Tuesday, June 09, 2009 5:17 PM
Subject: [GiDlist] Coordinates of pyramid vertices


I would like to know the local coordinates of the vertices of the
pyramid that is shown in the section "Postprocess results format:
ProjectName.post.res" of the user manual. Only the coordinates of the
internal Gauss points are shown there. I need to know those coordinates
in order to transform the local coordinates of the Gauss points of my
solver to the local coordinates used by GiD. The local coordinate system
is not also shown, contrary to the other element shapes.
Thank you in advance,
Cláudio
–

Claudio Alessandro de Carvalho Silva, Dr. Eng. (#329333)
CAE Solutions
Thorus Scisoft - www.thorus-scisoft.com.br
Fone:+55 019 3705-4002

This message is intended solely for the use of its addressee and may
contain privileged or confidential information. If you are not the
addressee you should not distribute, copy or file this message. In this
case, please notify the sender and destroy its contents immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter
informações privilegiadas e confidenciais. Se você não é o destinatário
não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.

GiDlist mailing list
GiDlist at gid.cimne.upc.edu
_http://gid.cimne.upc.es/mailman/listinfo/gidlist_