Page 1 of 1

Print to file SVG in mesh drawing corrupted

Posted: Wed Dec 08, 2021 12:19 pm
by Hemmi
It seems that "Print to file" "SVG.." in mesh drawing corrupted.
Regards,

Re: Print to file SVG in mesh drawing corrupted

Posted: Fri Dec 10, 2021 4:08 pm
by escolano
Please, attach a zip with the GiD model.
I have tried with a similar model, it is attached
test_svg.zip
(18.71 KiB) Downloaded 351 times
and it worked well
This is a screen capture opened with the InkScape editor

Re: Print to file SVG in mesh drawing corrupted

Posted: Sat Dec 11, 2021 9:03 am
by Hemmi
Thanks for the reply.
I attached zip file; my testing model is in it.
Am testing it by GiD 15.0.3 (free version).
Regards,

Re: Print to file SVG in mesh drawing corrupted

Posted: Mon Dec 13, 2021 12:45 pm
by miguel
Hi Hemmi,
Are you using an AMD Radeon graphics card? Which graphics card are you using?
We found a similar problem with the drivers of AMD Radeon cards and are solving it.

Can you try the Preferences --> Graphical --> System --> 'Safe visualization mode' ?
and see if the SVG is exported correctly?
SafeVisualizationMode.png
SafeVisualizationMode.png (15.33 KiB) Viewed 9268 times
Can you send us your gid.ini file (located at c:\users\<YourUserName>\AppData\Roaming\GiD\15.0.3\gid.ini) ?

thanks,

gidteam

Re: Print to file SVG in mesh drawing corrupted

Posted: Mon Dec 13, 2021 2:13 pm
by Hemmi
Thank you for the answer.

The graphics card of my laptop PC (Lenovo ideapad 330S-14IKB) is
Intel(R) UHD Graphics 620.

After changing to "Safe visualization mode", the correct figure is drawn; thus the problem solved.

The attached gid.ini file is the version after "Safe visualization mode" applied.

Regards,