[GiDlist] cannot visuallize the workspace (Windows 7 x64)

[Pablo Cuéllar]

Dear GiD staff,



My department bought some time ago a floating USB-license for GiD 9, and I
have been able to work with it in a couple of computers (a workstation and a
normal PC) without any problems.



But now I have installed it in a new laptop with Windows 7 (x64) and I
cannot visualize the geometries or meshes. The program seems to install well
but when I run it on the laptop, the workspace window (the area of the
screen where one normally sees the geometry, mesh, etc) is black, except for
the little corner where the coordinate axes are, which appears as normal
(white background and the axes in red). Other than that, everything seems ok
(I can see the menus, the command buttons, etc). Only the working area is
completely black and I cannot see anything.



I tried loading a project with a predefined geometry, and it didn’t help.
All I could see from the geometry were the parts that were on the left lower
corner, right “on top” of the coordinate axes.



I tried uninstalling and re-installing the program, but that didn’t help. So
then I downloaded the latest version from GiD web-page (version 9.0.4), but
the same problem persists.



Is that a matter of configuration? Do I need to set the preferences in some
specific way? If you could help me here I would be very grateful.



Best regards, and thanks in any case

Pablo



PS: Since perhaps someone has experienced this problem before, I tried to
look for this issue in the gid-list archives, but I could not find them in
your new web-page. Do you have a new link to the gidlist archives?



_____________________________________________________________________

Pablo Cuéllar

Civil engineer

mailto:pablo.cuellar at bam.de pablo.cuellar at bam.de



BAM, Federal Institute for Materials Research and Testing

Division VII.2 Buildings and Structures



BAM, Bundesanstalt für Materialforschung und - prüfung

Fachgruppe VII.2 Ingenieurbau



Unter den Eichen 87

D-12205 Berlin / Germany

Tel. +49/(0)30/81043888

Fax: +49/(0)30/81041727


a href="file:///C:%5CDokumente%20und%20Einstellungen%5Cpcuellar%5CAnwendungsdaten%5CMicroso"file:///C:\Dokumente%20und%20Einstellungen\pcuellar\Anwendungsdaten\Microso/a
ft\Signatures\www.bam.de www.bam.de

____________________________________________________________________________
_____



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100526/53f4ad0e/attachment.htm

[Ramon Ribó]

Try to start GiD using option (In the Microsoft Windows menu): "GiD Safe
mode"

----
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com ramsan at compassis.com
c/ Tuset, 8 7-2 tel. +34 93 218 19 89
08006 Barcelona, Spain fax. +34 93 396 97 46


2010/5/26 Pablo Cuéllar pablo.cuellar at bam.de

Dear GiD staff,



My department bought some time ago a floating USB-license for GiD 9, and I
have been able to work with it in a couple of computers (a workstation and a
normal PC) without any problems.



But now I have installed it in a new laptop with Windows 7 (x64) and I
cannot visualize the geometries or meshes. The program seems to install well
but when I run it on the laptop, the workspace window (the area of the
screen where one normally sees the geometry, mesh, etc) is black, except for
the little corner where the coordinate axes are, which appears as normal
(white background and the axes in red). Other than that, everything seems ok
(I can see the menus, the command buttons, etc). Only the working area is
completely black and I cannot see anything.



I tried loading a project with a predefined geometry, and it didn’t help.
All I could see from the geometry were the parts that were on the left lower
corner, right “on top” of the coordinate axes.



I tried uninstalling and re-installing the program, but that didn’t help.
So then I downloaded the latest version from GiD web-page (version 9.0.4),
but the same problem persists.



Is that a matter of configuration? Do I need to set the preferences in some
specific way? If you could help me here I would be very grateful.



Best regards, and thanks in any case

Pablo



PS: Since perhaps someone has experienced this problem before, I tried to
look for this issue in the gid-list archives, but I could not find them in
your new web-page. Do you have a new link to the gidlist archives?



*_____________________________________________________________________*

*Pablo Cuéllar*

*Civil engineer*

*pablo.cuellar at bam.de*



*BAM, Federal Institute for Materials Research and Testing*

*Division VII.2 Buildings and Structures*



*BAM, Bundesanstalt für Materialforschung und - prüfung*

*Fachgruppe VII.2 Ingenieurbau*



*Unter den Eichen 87*

*D-12205 Berlin / Germany*

*Tel. +49/(0)30/81043888*

*Fax: +49/(0)30/81041727*

*www.bam.de*

*
_________________________________________________________________________________
*



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100526/be9dd623/attachment.htm

[miguel]

Hello,

try to download gid version 9.0.6 from our web. this version solved the
problem with the nvidia drivers and the black screen.

I would suggest you to download the latest gid 9 version, the 9.3.1b, or our
lates gid 10 version.



Miguel Pasenau



De: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu]
En nombre de Pablo Cuéllar
Enviado el: miércoles, 26 de mayo de 2010 17:06
Para: gidlist at gid.cimne.upc.edu
Asunto: [GiDlist] cannot visuallize the workspace (Windows 7 x64)



Dear GiD staff,



My department bought some time ago a floating USB-license for GiD 9, and I
have been able to work with it in a couple of computers (a workstation and a
normal PC) without any problems.



But now I have installed it in a new laptop with Windows 7 (x64) and I
cannot visualize the geometries or meshes. The program seems to install well
but when I run it on the laptop, the workspace window (the area of the
screen where one normally sees the geometry, mesh, etc) is black, except for
the little corner where the coordinate axes are, which appears as normal
(white background and the axes in red). Other than that, everything seems ok
(I can see the menus, the command buttons, etc). Only the working area is
completely black and I cannot see anything.



I tried loading a project with a predefined geometry, and it didn’t help.
All I could see from the geometry were the parts that were on the left lower
corner, right “on top” of the coordinate axes.



I tried uninstalling and re-installing the program, but that didn’t help. So
then I downloaded the latest version from GiD web-page (version 9.0.4), but
the same problem persists.



Is that a matter of configuration? Do I need to set the preferences in some
specific way? If you could help me here I would be very grateful.



Best regards, and thanks in any case

Pablo



PS: Since perhaps someone has experienced this problem before, I tried to
look for this issue in the gid-list archives, but I could not find them in
your new web-page. Do you have a new link to the gidlist archives?



_____________________________________________________________________

Pablo Cuéllar

Civil engineer

mailto:pablo.cuellar at bam.de pablo.cuellar at bam.de



BAM, Federal Institute for Materials Research and Testing

Division VII.2 Buildings and Structures



BAM, Bundesanstalt für Materialforschung und - prüfung

Fachgruppe VII.2 Ingenieurbau



Unter den Eichen 87

D-12205 Berlin / Germany

Tel. +49/(0)30/81043888

Fax: +49/(0)30/81041727


a href="file:///C:%5CDokumente%20und%20Einstellungen%5Cpcuellar%5CAnwendungsdaten%5CMicroso"file:///C:\Dokumente%20und%20Einstellungen\pcuellar\Anwendungsdaten\Microso/a
ft\Signatures\www.bam.de www.bam.de

____________________________________________________________________________
_____



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100528/56a8d5ea/attachment.htm