GiD forum

Solved!

Thank you. I hadn't tried this, because it is an option
(mesh lines) which I never use, and I asumed that it is set to "no mesh"
by default. The problem must have been that my model is based in another
created by someone else. Anyway, thanks.

On Wed, 11 May 2011 12:00:02
+0200, gidlist-request at listas.cimne.upc.edu wrote:

Send GiDlist
mailing list submissions to
gidlist at listas.cimne.upc.edu [6]

To
subscribe or unsubscribe via the World Wide Web, visit

http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist [7]
or,
via email, send a message with subject or body 'help' to

gidlist-request at listas.cimne.upc.edu [8]

You can reach the person
managing the list at
gidlist-owner at listas.cimne.upc.edu [9]

When
replying, please edit your Subject line so it is more specific
than
"Re: Contents of GiDlist digest..."

Today's Topics:

1. Re:
Problems in meshing (Adria Melendo)


----------------------------------------------------------------------


Message: 1
Date: Wed, 11 May 2011 11:41:36 +0200
From: Adria
Melendo
Subject: Re: [GiDlist] Problems in meshing
To:
gidlist at listas.cimne.upc.edu [11]
Message-ID:
Content-Type:
text/plain; charset="utf-8"

El 11/05/2011 11:14, Fernando Salazar
escribi?:
Hi, GiD team I attach a GiD model I am having problems
with. GiD meshes it, but it creates linear elements, although there are
not isolated lines, i.e., lines wich do not belong to any surface. I
suppose I have commited an error in the definition of the geometry, but
I can't find it . I have deleted all points (no point is actually
deleted, because they all belong to some line). The same with the lines.
I have repaired and collapsed the model, but the linear elements are
still there. Could you help me? Thanks -- Fernando Salazar Gonz?lez
Ingeniero de Caminos, Canales y Puertos Director de CIMNE-Madrid Paseo
Gral Mart?nez Campos, 41. 28010 Madrid. Tel. +34 913 191 359 M?vil. +34
610 234 477 fsalazar at cimne.upc.edu [1] fsalazar at cimne.upc.edu
www.cimne.com [2] AVISO IMPORTANTE Los datos de car?cter personal
contenidos en el mensaje, se registrar?n enun fichero para facilitar la
gesti?n de las comunicaciones de CIMNE. Se pueden ejercitar los derechos
de acceso, rectificaci?n, cancelaci?n y oposici?n por escrito,
dirigi?ndose a nuestras oficinas de CIMNE, Gran Capit?n s/n, Edificio C1
- Campus Norte UPC, 08034 Barcelona, Espa?a. AVIS IMPORTANT Les dades de
car?cter personal contingudes en aquest missatge es registraran en un
fitxer per facilitar la gesti? de les comunicacions del CIMNE. Es poden
exercir els drets d'acc?s, rectificaci?, cancel?laci? i oposici?, per
escrit a les nostres oficines del CIMNE, Gran Capit? s/n, Edifici C1,
Campus Nord UPC, 08034 Barcelona, Espanya. IMPORTANT NOTICE All personal
data contained in this mail will be processed confidentially andstored
in a file property of CIMNE in order to manage corporate communications.
You may exercise the right of access, rectification, deletion and
objection by letter sent to CIMNE, Gran Capit?n, Edificio C1 - Campus
Norte UPC, 08034 Barcelona, Spain.
_______________________________________________ GiDlist mailing list
GiDlist at listas.cimne.upc.edu [4]
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist [5]
Hi
Fernando, The model has been forced to mesh the lines, you can apply
this option with the menu Mesh-Mesh criteria- (Mesh/No mesh/Default) ,
to see which entities has been forced to mesh, you can go to
Mesh-Draw-Mesh/No mesh-(entity type) You can also reset all
preferences by Mesh-Reset mesh data. Be careful, because maybe this
option has been applied by the solver automatically, since the solver
needs the linear elements to calculate, It could be... I don't know the
specific solver's needs. Regards, Adri? -------------- next part
-------------- An HTML attachment was scrubbed... URL:
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20110511/19ebb155/attachment.html
[13] ------------------------------
_______________________________________________ GiDlist mailing list
GiDlist at listas.cimne.upc.edu [14]
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist [15] End of
GiDlist Digest, Vol 11, Issue 2
**************************************

--

Fernando Salazar González

Ingeniero de Caminos, Canales y Puertos
Director de CIMNE-Madrid

Paseo Gral Martínez Campos, 41. 28010 Madrid.

Tel. +34 913 191
359
Móvil. +34 610 234 477
fsalazar at cimne.upc.edu [16]
www.cimne.com
[17]

AVISO IMPORTANTE

Los datos de carácter personal contenidos en
el mensaje, se registrarán enun fichero para facilitar la gestión de las
comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso,
rectificación, cancelación y oposición por escrito, dirigiéndose a
nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte
UPC, 08034 Barcelona, España.

AVIS IMPORTANT

Les dades de caràcter
personal contingudes en aquest missatge es registraran en un fitxer per
facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els
drets d'accés, rectificació, cancel·lació i oposició, per escrit a les
nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord
UPC, 08034 Barcelona, Espanya.

IMPORTANT NOTICE

All personal data
contained in this mail will be processed confidentially andstored in a
file property of CIMNE in order to manage corporate communications. You
may exercise the right of access, rectification, deletion and objection
by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC,
08034 Barcelona, Spain.


Links:
------
[1]
mailto:fsalazar at cimne.upc.edu
[2] http://www.cimne.com
[3]
http://www.cimne.com
[4] mailto:GiDlist at listas.cimne.upc.edu
[5]
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
[6]
mailto:gidlist at listas.cimne.upc.edu
[7]
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
[8]
mailto:gidlist-request at listas.cimne.upc.edu
[9]
mailto:gidlist-owner at listas.cimne.upc.edu
[10]
mailto:amelendo at cimne.upc.edu
[11]
mailto:gidlist at listas.cimne.upc.edu
[12]
mailto:4DCA59D0.2030200 at cimne.upc.edu
[13]
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20110511/19ebb155/attachment.html
[14]
mailto:GiDlist at listas.cimne.upc.edu
[15]
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
[16]
mailto:fsalazar at cimne.upc.edu
[17] http://www.cimne.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20110511/06101cc3/attachment.htm

As Adria pointed, the Mesh-Mesh Criteria-Mesh-Lines has been assigned to all lines automatically by the 'PFEM' problemtype,
because this solver wants also this kind of mesh additionally to the surface and volume mesh.

Note: I think that PFEM implements theTcl procedure proc BeforeMeshGeneration { elementsize } to assign this information to all lines
and this GiD-Tcl event procedure is automatically invoked by GiD just before the mesh generation.
----- Original Message -----
From: Fernando Salazar
To: gidlist at listas.cimne.upc.edu
Sent: Wednesday, May 11, 2011 12:11 PM
Subject: Re: [GiDlist] GiDlist Digest, Vol 11, Issue 2


Solved!

Thank you. I hadn't tried this, because it is an option (mesh lines) which I never use, and I asumed that it is set to "no mesh" by default. The problem must have been that my model is based in another created by someone else. Anyway, thanks.



On Wed, 11 May 2011 12:00:02 +0200, gidlist-request at listas.cimne.upc.edu wrote:

Send GiDlist mailing list submissions to
gidlist at listas.cimne.upc.edu

To subscribe or unsubscribe via the World Wide Web, visit
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
or, via email, send a message with subject or body 'help' to
gidlist-request at listas.cimne.upc.edu

You can reach the person managing the list at
gidlist-owner at listas.cimne.upc.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of GiDlist digest..."


Today's Topics:

1. Re: Problems in meshing (Adria Melendo)


----------------------------------------------------------------------

Message: 1
Date: Wed, 11 May 2011 11:41:36 +0200
From: Adria Melendo amelendo at cimne.upc.edu
Subject: Re: [GiDlist] Problems in meshing
To: gidlist at listas.cimne.upc.edu
Message-ID: 4DCA59D0.2030200 at cimne.upc.edu
Content-Type: text/plain; charset="utf-8"

El 11/05/2011 11:14, Fernando Salazar escribi?:
Hi, GiD team I attach a GiD model I am having problems with. GiD meshes it, but it creates linear elements, although there are not isolated lines, i.e., lines wich do not belong to any surface. I suppose I have commited an error in the definition of the geometry, but I can't find it . I have deleted all points (no point is actually deleted, because they all belong to some line). The same with the lines. I have repaired and collapsed the model, but the linear elements are still there. Could you help me? Thanks -- Fernando Salazar Gonz?lez Ingeniero de Caminos, Canales y Puertos Director de CIMNE-Madrid Paseo Gral Mart?nez Campos, 41. 28010 Madrid. Tel. +34 913 191 359 M?vil. +34 610 234 477 fsalazar at cimne.upc.edu fsalazar at cimne.upc.edu www.cimne.com http://www.cimne.com AVISO IMPORTANTE Los datos de car?cter personal contenidos en el mensaje, se registrar?n enun fichero para facilitar la gesti?n de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificaci?n, cancelaci?n y oposici?n por escrito, dirigi?ndose a nuestras oficinas de CIMNE, Gran Capit?n s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Espa?a. AVIS IMPORTANT Les dades de car?cter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gesti? de les comunicacions del CIMNE. Es poden exercir els drets d'acc?s, rectificaci?, cancel?laci? i oposici?, per escrit a les nostres oficines del CIMNE, Gran Capit? s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya. IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially andstored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capit?n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain. _______________________________________________ GiDlist mailing list GiDlist at listas.cimne.upc.edu http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist Hi Fernando,
The model has been forced to mesh the lines, you can apply this option
with the menu Mesh-Mesh criteria- (Mesh/No mesh/Default) , to see
which entities has been forced to mesh, you can go to
Mesh-Draw-Mesh/No mesh-(entity type)
You can also reset all preferences by Mesh-Reset mesh data.
Be careful, because maybe this option has been applied by the solver
automatically, since the solver needs the linear elements to calculate,
It could be... I don't know the specific solver's needs.

Regards,
Adri?



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20110511/19ebb155/attachment.html

------------------------------

_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist


End of GiDlist Digest, Vol 11, Issue 2
**************************************


--

Fernando Salazar González Ingeniero de Caminos, Canales y Puertos Director de CIMNE-Madrid Paseo Gral Martínez Campos, 41. 28010 Madrid. Tel. +34 913 191 359Móvil. +34 610 234 477 fsalazar at cimne.upc.edu www.cimne.com AVISO IMPORTANTE Los datos de carácter personal contenidos en el mensaje, se registrarán enun fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España. AVIS IMPORTANT Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya. IMPORTANT NOTICE All personal data contained in this mail will be processed confidentially andstored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain.

------------------------------------------------------------------------------


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20110511/511b2c58/attachment-0001.htm

Dear all,
It is possible to create an array (vector or matrix with integers) in
the .bas file to work with?

Thanks,
Steffen

Not, at bas level is not possible to use arrays,
but it's possible to invoke *tcl commands that is a much powerful scripting
language and could do thinks like this.
The value returned by the *tcl command is directly printed to the
calculation file.

Enrique Escolano

----- Original Message -----
From: "Steffen Rothe" steffen.rothe at tu-clausthal.de
To: gidlist at listas.cimne.upc.edu
Sent: Friday, May 20, 2011 5:10 PM
Subject: [GiDlist] Creating an array in .bas file


Dear all,
It is possible to create an array (vector or matrix with integers) in
the .bas file to work with?

Thanks,
Steffen
_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist