GiD forum

Good afternoon,

I am trying to "Take a snapshot" of a geometry in preprocess mode and I
can not do it. In postprocess mode I do not have any problem to take
pictures.

The Warning I obtained for png pictures is: Unknown extension '.png'



I also tried with .jpg and .gif extensions with the same result.

Can yo help me?

Thank you vey much,

--
Joaquín Irazábal González
Ingeniero Industrial / Mechanical Engineer
CIMNE
Paseo Gral Martínez Campos, 41, 9º Izq.
Madrid 28010
Tel. +34 913 191 359
jirazabal at cimne.upc.edu
www.cimne.com

---------------------------------------------------------------------------

AVISO IMPORTANTE

Los datos de carácter personal facilitados están registrados en un fichero con la finalidad de facilitar la gestión de las comunicaciones de CIMNE. Puede ejercitar los derechos de acceso, rectificación y cancelación respondiendo al presente correo electrónico.

AVIS IMPORTANT

Les dades de caràcter personal facilitades seran registrades en un fitxer amb la finalitat de facilitar les gestions de les comunicacions de CIMNE. En qualsevol cas podrà exercir els seus drets d'accés, rectificació i cancel·lació responent a aquest correu electrònic.

IMPORTANT NOTICE

All personal data contained on this mail will be processed confindentially and registered in a file property of CIMNE., in order to manage corporate communications. You may exercise the rigths of access, rectification, erasure and object by replying this email.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120530/a0cb3a12/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hgjhcehb.png
Type: image/png
Size: 7548 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120530/a0cb3a12/attachment.png

How are you taking the snapshot?
I have tried with GiD 11.0 Windows x32,
from the menu Files-Print to file-PNG
and
from the camera icon or the upper icons bar, and selecting Files of type png in the window that is opened
and it worked in both cases

Which platform are you using? (Linux, Windows, x32 or x64)
----- Original Message -----
From: Joaquín Irazábal González
To: gidlist at listas.cimne.upc.edu
Sent: Wednesday, May 30, 2012 4:28 PM
Subject: [GiDlist] Problems with the tool "Take a snapshot"


Good afternoon,

I am trying to "Take a snapshot" of a geometry in preprocess mode and I can not do it. In postprocess mode I do not have any problem to take pictures.

The Warning I obtained for png pictures is: Unknown extension '.png'



I also tried with .jpg and .gif extensions with the same result.

Can yo help me?

Thank you vey much,

--
Joaquín Irazábal González
Ingeniero Industrial / Mechanical Engineer
CIMNE
Paseo Gral Martínez Campos, 41, 9º Izq.
Madrid 28010
Tel. +34 913 191 359
jirazabal at cimne.upc.edu
www.cimne.com

---------------------------------------------------------------------------

AVISO IMPORTANTE

Los datos de carácter personal facilitados están registrados en un fichero con la finalidad de facilitar la gestión de las comunicaciones de CIMNE. Puede ejercitar los derechos de acceso, rectificación y cancelación respondiendo al presente correo electrónico.

AVIS IMPORTANT

Les dades de caràcter personal facilitades seran registrades en un fitxer amb la finalitat de facilitar les gestions de les comunicacions de CIMNE. En qualsevol cas podrà exercir els seus drets d'accés, rectificació i cancel·lació responent a aquest correu electrònic.

IMPORTANT NOTICE

All personal data contained on this mail will be processed confindentially and registered in a file property of CIMNE., in order to manage corporate communications. You may exercise the rigths of access, rectification, erasure and object by replying this email.


------------------------------------------------------------------------------


_______________________________________________
GiDlist mailing list
GiDlist at listas.cimne.upc.edu
http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120531/b5723781/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 7548 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120531/b5723781/attachment.png

Hi all,

with all GiD versions I've tried (9.x, 10.x, 11.x) the "Create Result"
option in the "Window" menu of postprocessing is not working properly.
Namely I have noted two issues:

1) When I want to pick an operand result from a long list I have to click
"..More..." on the dropdown menu. Choosing the result from the "View
Results and Deformation" window which popups thereafter has the only effect
of changing the DISPLAYED results and does not change the result chosen as
"Create Result" operand, instead.

2) Whenever I try to create a new result from results defined at Gauss
points I have the following error:

found an error

while executing
"GiD_Result create {*}$res_dst"
(procedure "PCRApply" line 409)
invoked from within
"PCRApply"
invoked from within
".gid.wPostCrearResultado.but.apply invoke "
invoked from within
".gid.wPostCrearResultado.but.apply instate !disabled {
.gid.wPostCrearResultado.but.apply invoke } "
invoked from within
".gid.wPostCrearResultado.but.apply instate pressed {
.gid.wPostCrearResultado.but.apply state !pressed;
.gid.wPostCrearResultado.but.apply instate !di..."
(command bound to event)

Is this ever going to be solved?

Regards,

NL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20120601/9128da10/attachment.htm