[ GiDlist ] Units
Posted: Fri Jun 22, 2001 2:17 pm
Hello everybody,
a problem in the problem customization.
I don't know how to modify the unit field as indicated in the GiD manual
for the special fields.
If I only introduce the string #UNITS# after the property_name and the
unit, i.e. (in the file problem_name.mat)
QUESTION: Young's_modulus_E:#UNITS#
VALUE: 2.1e11Pa
and then I set the problem data
Data-Problem type-problem_name
the GiD crashes (I specify that without the unit, i.e. in the usual form
QUESTION: Young's_modulus_E:
VALUE: 2.1e11
it works!).
I used all other special fields and I found them excellent.
Regards
ALDO GHISI
Department of Structural Engineering
Politecnico di Milano
Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Tel.: +39 02 2399 4218
Fax.: +39 02 2399 4220
E_mail: aldo.ghisi at polimi.it
a problem in the problem customization.
I don't know how to modify the unit field as indicated in the GiD manual
for the special fields.
If I only introduce the string #UNITS# after the property_name and the
unit, i.e. (in the file problem_name.mat)
QUESTION: Young's_modulus_E:#UNITS#
VALUE: 2.1e11Pa
and then I set the problem data
Data-Problem type-problem_name
the GiD crashes (I specify that without the unit, i.e. in the usual form
QUESTION: Young's_modulus_E:
VALUE: 2.1e11
it works!).
I used all other special fields and I found them excellent.
Regards
ALDO GHISI
Department of Structural Engineering
Politecnico di Milano
Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Tel.: +39 02 2399 4218
Fax.: +39 02 2399 4220
E_mail: aldo.ghisi at polimi.it