[ GiDlist ] Shell thickness
Posted: Tue Jun 12, 2001 6:32 pm
This is again a problem I have during a Nastran_plane export : thicknesses
lower than 0.01 are all changed in "0.01". I tried this with many materials,
the thickness always grew up. I tried the exponential format but it doesn't
work.
Regards
Olivier Bounhoure
lower than 0.01 are all changed in "0.01". I tried this with many materials,
the thickness always grew up. I tried the exponential format but it doesn't
work.
Regards
Olivier Bounhoure