GiD forum

Hi,

I am taking FEM course at UF. I solved velocity profile at a surface that I generated using GID. I loaded the elements and coordinates to MATLAB. I solved the problem but I have no idea how to postpone the result to GID. What to write as header? Thank you in advance.

Kerem Uguz



---------------------------------
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20020506/0b2d55b8/attachment.htm

You code must create a file 'problemname'.flavia.res with this content:

Result "Velocity" "Estatic" 1 Vector OnNodes
ComponentNames "Vx", "Vy", "Vz", "|Velocity|"
Values
1 0 0 0 0
2 0.000266826 -4.13918e-05 -3.07624e-06 0.000270035
...
End Values

Note: the fourth value (|Velocity|) of a vectorial result, the vector modulus, is optional.

----- Original Message -----
From: Abdullah Uguz
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, May 02, 2002 7:36 PM
Subject: [GiDlist] help on .res file


Hi,

I am taking FEM course at UF. I solved velocity profile at a surface that I generated using GID. I loaded the elements and coordinates to MATLAB. I solved the problem but I have no idea how to postpone the result to GID. What to write as header? Thank you in advance.

Kerem Uguz





------------------------------------------------------------------------------
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20020506/6a1e8989/attachment.htm

The usual way to write vectors is this:

Result "Velocity" "Estatic" 1 Vector OnNodes
ComponentNames "Vx", "Vy", "Vz"
Values
1 0 0 0
2 0.000266826 -4.13918e-05 -3.07624e-06
...
End Values

the possibility to write the fourth component of the vector, the 'signed modulus',
is provided to draw the beam diagrams properly as the picture shows.
Note how the beam diagram is drawn, above and under the bar,
and the 'signed module' values.

miguel


You code must create a file 'problemname'.flavia.res with this content:

Result "Velocity" "Estatic" 1 Vector OnNodes
ComponentNames "Vx", "Vy", "Vz", "|Velocity|"
Values
1 0 0 0 0
2 0.000266826 -4.13918e-05 -3.07624e-06 0.000270035
...
End Values

Note: the fourth value (|Velocity|) of a vectorial result, the vector modulus, is optional.

--
--------------------------------------------------------------------------------
Miguel A. de Riera Pasenau miguel at cimne.upc.es http://gid.cimne.upc.es
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lin2.png
Type: image/png
Size: 13814 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20020506/984e084c/attachment.png
-------------- next part --------------
MESH "0" dimension 3 ElemType Linear Nnode 2
Coordinates
1 7.755911 -6.626038 0
2 7.564407 6.932444 0
3 -7.71761 6.664338 0
4 -7.947415 -6.817542 0
end coordinates

Elements
1 1 2 1
2 2 3 1
3 3 4 1
end elements
-------------- next part --------------
GiD Post Results File 1.0

GaussPoints "pp" ElemType Linear
Number Of Gauss Points: 8
Nodes not included
Natural Coordinates: Internal
End gausspoints

Result "X' Momentus" "Estatic" 1 Scalar OnGaussPoints "pp"
ComponentNames "X' Momentus"
Values
1 0
0
0
0
0
0
0
0
2 0
0
0
0
0
0
0
0
3 0
0
0
0
0
0
0
0
End values

Result "X' Shear" "Estatic" 1 Scalar OnGaussPoints "pp"
ComponentNames "X' Shear"
Values
1 2545.14
2312.71
2080.28
1847.85
1615.42
1382.99
1150.56
918.133
2 188.273
192.869
197.465
202.061
206.657
211.253
215.849
220.445
3 922.133
1153.25
1384.37
1615.48
1846.6
2077.72
2308.83
2539.95
End values

Result "Y' Momentus" "Estatic" 1 Scalar OnGaussPoints "pp"
ComponentNames "Y' Momentus"
Values
1 0
0
0
0
0
0
0
0
2 0
0
0
0
0
0
0
0
3 0
0
0
0
0
0
0
0
End values

Result "Y' Shear" "Estatic" 1 Scalar OnGaussPoints "pp"
ComponentNames "Y' Shear"
Values
1 168.433
171.716
174.999
178.281
181.564
184.847
188.13
191.413
2 -918.782
-656.805
-394.828
-132.851
129.126
391.104
653.081
915.058
3 -188.672
-184.733
-180.793
-176.854
-172.914
-168.975
-165.035
-161.096
End values

Result "Z' Momentus" "Estatic" 1 Scalar OnGaussPoints "pp"
ComponentNames "Z' Momentus"
Values
1 -797.515
-468.063
-132.251
209.92
558.449
913.339
1274.59
1642.19
2 1642.19
-77.9358
-1226.04
-1802.13
-1806.2
-1238.24
-98.2656
1613.73
3 1613.73
1254.1
902.05
557.592
220.721
-108.561
-430.255
-744.361
End values

Result "Z' Shear" "Estatic" 1 Scalar OnGaussPoints "pp"
ComponentNames "Z' Shear"
Values
1 0
0
0
0
0
0
0
0
2 0
0
0
0
0
0
0
0
3 0
0
0
0
0
0
0
0
End values

Result "M Reactions" "Estatic" 1 Vector OnNodes
ComponentNames "Mx", "My", "Mz", "|M Reactions|"
Values
1 0 0 823.482 823.482
2 0 0 0 0
3 0 0 0 0
4 0 0 -775.346 775.346
End values

Result "S Reactions" "Estatic" 1 Vector OnNodes
ComponentNames "Px", "Py", "Pz", "|S Reactions|"
Values
1 -204.36 1728.92 0 1740.96
2 0 0 0 0
3 0 0 0 0
4 204.36 1727.81 0 1739.85
End values

Result "Displacements" "Estatic" 1 Vector OnGaussPoints "pp"
ComponentNames "X'", "Y'", "Z'", "|Displacements|"
Values
1 0 0 0 0
-1.3311e-07 -7.26786e-06 0 7.26908e-06
-2.6622e-07 -2.33822e-05 0 2.33837e-05
-3.99329e-07 -4.18502e-05 0 4.18521e-05
-5.32439e-07 -5.60528e-05 0 5.60553e-05
-6.65549e-07 -5.92446e-05 0 5.92483e-05
-7.98659e-07 -4.45541e-05 0 4.45613e-05
-9.31769e-07 -4.98345e-06 0 5.06981e-06
2 -4.98023e-06 9.48799e-07 0 5.0698e-06
-4.99794e-06 7.59348e-05 0 7.60991e-05
-5.01565e-06 0.000150144 0 0.000150228
-5.03336e-06 0.00019462 0 0.000194685
-5.05106e-06 0.000194836 0 0.000194901
-5.06877e-06 0.000150696 0 0.000150781
-5.08648e-06 7.6531e-05 0 7.66998e-05
-5.10418e-06 1.10338e-06 0 5.22208e-06
3 9.26228e-07 5.13928e-06 0 5.22208e-06
7.9391e-07 -3.61308e-05 0 3.61395e-05
6.61591e-07 -5.23186e-05 0 5.23228e-05
5.29273e-07 -5.05153e-05 0 5.05181e-05
3.96955e-07 -3.7663e-05 0 3.76651e-05
2.64637e-07 -2.0555e-05 0 2.05567e-05
1.32318e-07 -5.83559e-06 0 5.83709e-06
0 -7.50418e-20 0 7.50418e-20
End values

Result "VDisplacements" "Estatic" 1 Vector OnGaussPoints "pp"
ComponentNames "X", "Y", "Z", "|VDisplacements|"
Values
1 0 0 0 0
7.26902e-06 -3.04548e-08 0 7.26908e-06
2.33836e-05 6.40262e-08 0 2.33837e-05
4.18517e-05 1.91747e-07 0 4.18521e-05
5.60547e-05 2.59229e-07 0 5.60553e-05
5.92481e-05 1.7121e-07 0 5.92483e-05
4.45609e-05 -1.69356e-07 0 4.45612e-05
4.99611e-06 -8.61296e-07 0 5.06981e-06
2 4.99611e-06 -8.61296e-07 0 5.06981e-06
6.32913e-06 -7.58354e-05 0 7.60991e-05
7.64852e-06 -0.000150033 0 0.000150228
8.44637e-06 -0.000194501 0 0.000194684
8.46787e-06 -0.000194718 0 0.000194902
7.71132e-06 -0.000150584 0 0.000150781
6.42811e-06 -7.643e-05 0 7.66998e-05
5.12275e-06 -1.01368e-06 0 5.22208e-06
3 5.12275e-06 -1.01368e-06 0 5.22208e-06
-3.61391e-05 -1.78026e-07 0 3.61395e-05
-5.23223e-05 2.30157e-07 0 5.23228e-05
-5.0517e-05 3.31722e-07 0 5.05181e-05
-3.76643e-05 2.44983e-07 0 3.76651e-05
-2.05565e-05 8.57155e-08 0 2.05567e-05
-5.837e-06 -3.28447e-08 0 5.83709e-06
-7.50309e-20 1.27892e-21 0 7.50418e-20
End values

Result "VX' Momentus" "Estatic" 1 Vector OnGaussPoints "pp"
ComponentNames "X-VX' Momentus", "Y-VX' Momentus", "Z-VX' Momentus", "|VX' Momentus|"
Values
1 0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
2 -0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
3 -0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
-0 0 0 0
End values

Result "VX' Shear" "Estatic" 1 Vector OnGaussPoints "pp"
ComponentNames "X-VX' Shear", "Y-VX' Shear", "Z-VX' Shear", "|VX' Shear|"
Values
1 -2544.89 -35.9442 -0 2545.14
-2312.48 -32.6617 -0 2312.71
-2080.07 -29.3792 -0 2080.28
-1847.67 -26.0966 -0 1847.85
-1615.26 -22.8141 -0 1615.42
-1382.85 -19.5316 -0 1382.99
-1150.45 -16.249 -0 1150.56
-918.042 -12.9665 -0 918.133
2 3.30246 -188.244 -0 188.273
3.38308 -192.839 -0 192.869
3.4637 -197.435 -0 197.465
3.54432 -202.03 -0 202.061
3.62493 -206.625 -0 206.657
3.70555 -211.221 -0 211.253
3.78617 -215.816 -0 215.849
3.86679 -220.411 -0 220.445
3 921.999 -15.7157 -0 922.133
1153.08 -19.6545 -0 1153.25
1384.17 -23.5934 -0 1384.37
1615.25 -27.5322 -0 1615.48
1846.33 -31.4711 -0 1846.6
2077.41 -35.41 -0 2077.72
2308.5 -39.3488 -0 2308.83
2539.58 -43.2877 -0 2539.95
End values

Result "VY' Momentus" "Estatic" 1 Vector OnGaussPoints "pp"
ComponentNames "X-VY' Momentus", "Y-VY' Momentus", "Z-VY' Momentus", "|VY' Momentus|"
Values
1 -0 0 -0 0
-0 0 -0 0
-0 0 -0 0
-0 0 -0 0
-0 0 -0 0
-0 0 -0 0
-0 0 -0 0
-0 0 -0 0
2 -0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
3 -0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
-0 -0 -0 0
End values

Result "VY' Shear" "Estatic" 1 Vector OnGaussPoints "pp"
ComponentNames "X-VY' Shear", "Y-VY' Shear", "Z-VY' Shear", "|VY' Shear|"
Values
1 -168.416 -2.37872 -0 168.433
-171.699 -2.42509 -0 171.716
-174.981 -2.47145 -0 174.999
-178.264 -2.51781 -0 178.281
-181.546 -2.56417 -0 181.564
-184.829 -2.61054 -0 184.847
-188.111 -2.6569 -0 188.13
-191.394 -2.70326 -0 191.413
2 -16.1162 918.641 0 -918.782
-11.5209 656.704 0 -656.805
-6.9256 394.767 0 -394.828
-2.33031 132.83 0 -132.851
2.26498 -129.107 -0 129.126
6.86028 -391.043 -0 391.104
11.4556 -652.98 -0 653.081
16.0509 -914.917 -0 915.058
3 -188.645 3.21549 0 -188.672
-184.706 3.14835 0 -184.733
-180.767 3.08121 0 -180.793
-176.828 3.01407 0 -176.854
-172.889 2.94693 0 -172.914
-168.95 2.87979 0 -168.975
-165.012 2.81265 0 -165.035
-161.073 2.74552 0 -161.096
End values

Result "VZ' Momentus" "Estatic" 1 Vector OnGaussPoints "pp"
ComponentNames "X-VZ' Momentus", "Y-VZ' Momentus", "Z-VZ' Momentus", "|VZ' Momentus|"
Values
1 -797.435 -11.263 -0 -797.515
-468.016 -6.6103 -0 -468.063
-132.238 -1.86774 -0 -132.251
209.899 2.96463 0 209.92
558.394 7.8868 0 558.449
913.248 12.8988 0 913.339
1274.46 18.0006 0 1274.59
1642.03 23.1922 0 1642.19
2 -28.8054 1641.94 0 1642.19
1.36706 -77.9238 -0 -77.9358
21.5058 -1225.86 -0 -1226.04
31.6109 -1801.85 -0 -1802.13
31.6822 -1805.92 -0 -1806.2
21.7198 -1238.05 -0 -1238.24
1.72366 -98.2505 -0 -98.2656
-28.3062 1613.48 0 1613.73
3 -1613.5 27.5024 0 1613.73
-1253.92 21.3732 0 1254.1
-901.919 15.3734 0 902.05
-557.51 9.50288 0 557.592
-220.689 3.76169 0 220.721
108.545 -1.85018 -0 -108.561
430.193 -7.33272 -0 -430.255
744.253 -12.6859 -0 -744.361
End values

Result "VZ' Shear" "Estatic" 1 Vector OnGaussPoints "pp"
ComponentNames "X-VZ' Shear", "Y-VZ' Shear", "Z-VZ' Shear", "|VZ' Shear|"
Values
1 0 -0 0 0
0 -0 0 0
0 -0 0 0
0 -0 0 0
0 -0 0 0
0 -0 0 0
0 -0 0 0
0 -0 0 0
2 0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
3 0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
End values

Result "Local Axes" "Estatic" 1 LocalAxes OnGaussPoints "pp"
ComponentNames "A1-Local Axes", "A2-Local Axes", "A3-Local Axes"
Values
1 0 0 0
0 0 0
0 0 0
0 1.49012e-08 4.69827
0 0 0
0 0 0
0 0 0
0 0 0
2 0 0 0
0 0 0
0 0 0
0 0 3.12405
0 0 0
0 0 0
0 0 0
0 0 0
3 0 0 0
0 0 0
0 0 0
0 0 1.58784
0 0 0
0 0 0
0 0 0
0 0 0
End values

Dear GID TEAM,

Any thoughts would be appreciated. I can not get 7.0 beta working.

I tried installing version 7.0 beta on a windows 2000 machine that has also
a Linux dual boot set up.

Recently I switched by GID license from windows to Linux on the same
machine.

When I try to start GID version 7.0 beta the screen comes up with the GID
interface for less than 1/10 sec and then disappears. I did not know if
this is a new GID graphics problem or perhaps a license problem when I try
to run the academic windows version where there was once a licensed
professional version that is deactivated.

Regards,

Mark D. Moeckel
Sr. Engineering Specialist
Engine Aero/Fluid-Dynamics
TSD Engine Research
--------------------------------------------------------------------------------

-
Caterpillar Inc.
Technical Center, Bldg. F
P.O. Box 1875
Mossville, Illinois 61552-1875
309.578.4383 (voice)
309.578.9900 (fax)
--------------------------------------------------------------------------------

-


|--------+---------------------------------
| | "Enrique Escolano" |
| | escolano at cimne.upc.es|
| | Sent by: |
| | gidlist-admin at gatxan.ci|
| | mne.upc.es |
| | |
| | |
| | 05/03/2002 03:00 PM |
| | Please respond to |
| | gidlist |
| | |
|--------+---------------------------------
-----------------------------------------------------------------------------------------------------------|
| |
| |
| |
| |
| |
|To: |
|cc: gidlist at gatxan.cimne.upc.es |
| |
| |
| |
| Subject: [GiDlist] GiD 7.0-Beta |
-----------------------------------------------------------------------------------------------------------|



Caterpillar: Confidential Green Retain Until: 06/02/2002
Retention Category: G90 -
Information and Reports




(Embedded image moved to file: pic04313.gif) (Embedded image moved to
file: pic24355.gif)





New: GiD 7.0-Beta is available


(Windows version)



Download from http://gid.cimne.com/download/do07.html
Check what's new at http://gid.cimne.com/support/whatsnew7



Note: The password of version 6.x is not valid for this version, a new password is required.
Permanent passwords are not available until the release of the official version 7.0. To obtain a
temporary password go to: http://gid.cimne.upc.es/password/pa07_1.subst







We shall apreciate if you can test it and notify in the mailing list about
any errors or problems that you can find.

The GiD Team

-------------- next part --------------
A non-text attachment was scrubbed...
Name: pic04313.gif
Type: image/gif
Size: 6286 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20020506/17d31cea/attachment.gif
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pic24355.gif
Type: image/gif
Size: 2056 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20020506/17d31cea/attachment-0001.gif

This is a problem with the graphic card (not with the password)

A possibility to avoid the problem is the following: Try to start GiD safe
mode (from the start menu) and activate use Software OpenGL. If the problem
persists, try to deactivate the graphic hardware acceleration (Screen
properties-Advanced options). Also try a different colour resolutions
(select 32 bits of colour for example) Search in the web page of your card
if there are actualized drivers for your graphic card

Note: This version 7.0-Beta includes the possibility of concentrate elements
near or far both end points of a curve, as you suggest in a previous mail.

Enrique Escolano.

----- Original Message -----
From: "Mark D. Moeckel" MOECKEL_MARK_D at cat.com
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, May 06, 2002 3:11 PM
Subject: Re: [GiDlist] GiD 7.0-Beta



Dear GID TEAM,

Any thoughts would be appreciated. I can not get 7.0 beta working.

I tried installing version 7.0 beta on a windows 2000 machine that has
also
a Linux dual boot set up.

Recently I switched by GID license from windows to Linux on the same
machine.

When I try to start GID version 7.0 beta the screen comes up with the GID
interface for less than 1/10 sec and then disappears. I did not know if
this is a new GID graphics problem or perhaps a license problem when I try
to run the academic windows version where there was once a licensed
professional version that is deactivated.

Regards,

Mark D. Moeckel
Sr. Engineering Specialist
Engine Aero/Fluid-Dynamics
TSD Engine Research
--------------------------------------------------------------------------
------

-
Caterpillar Inc.
Technical Center, Bldg. F
P.O. Box 1875
Mossville, Illinois 61552-1875
309.578.4383 (voice)
309.578.9900 (fax)
--------------------------------------------------------------------------
------

-


|--------+---------------------------------
| | "Enrique Escolano" |
| | escolano at cimne.upc.es|
| | Sent by: |
| | gidlist-admin at gatxan.ci|
| | mne.upc.es |
| | |
| | |
| | 05/03/2002 03:00 PM |
| | Please respond to |
| | gidlist |
| | |
|--------+---------------------------------

---------------------------------------------------------------------------
--------------------------------|
|
|
|
|
|
|
|
|
|
|
|To:
|
|cc: gidlist at gatxan.cimne.upc.es
|
|
|
|
|
|
|
| Subject: [GiDlist] GiD 7.0-Beta
|

---------------------------------------------------------------------------
--------------------------------|



Caterpillar: Confidential Green Retain Until: 06/02/2002
Retention Category: G90 -
Information and Reports




(Embedded image moved to file: pic04313.gif) (Embedded image moved to
file: pic24355.gif)





New: GiD 7.0-Beta is available


(Windows version)



Download from http://gid.cimne.com/download/do07.html
Check what's new at http://gid.cimne.com/support/whatsnew7



Note: The password of version 6.x is not valid for this version, a new
password is required.
Permanent passwords are not available until the release of the official
version 7.0. To obtain a
temporary password go to: http://gid.cimne.upc.es/password/pa07_1.subst







We shall apreciate if you can test it and notify in the mailing list about
any errors or problems that you can find.

The GiD Team