Page 1 of 1
[GiDlist] Postprocessing - Interpolation
Posted: Thu Mar 14, 2002 10:47 am
by Kendon, Tim
Hello there!
Does GID have the capabalilities to interpolate a set of values associated
with a set of scattered data points to a generated mesh?
In a typical numerical work this might be done by Delauney triangularization
of the scattered data points (2D problem) and then local interpolation
within each triangular to the vertices of the mesh.
Can anyone help with this request??
Alternatively can GID mesh through a set of scattered data points? Seems to
me I need at least lines to mesh.
Many thanks
Tim Kendon
Imperial College
[GiDlist] Postprocessing - Interpolation
Posted: Thu Mar 14, 2002 1:29 pm
by Enrique Escolano
Internally, GiD can create a Delaunay mesh or triangles from a set or points
(2D or 3D projected in 2D), but this capability is not public.
You can use some program as "Surfer" (
www.goldensoftware.com) for your
pourposes.
Enrique Escolano
----- Original Message -----
From: "Kendon, Tim"
t.kendon at ic.ac.uk
To: "'
gidlist at gid.cimne.upc.es'"
gidlist at gatxan.cimne.upc.es
Sent: Thursday, March 14, 2002 10:46 AM
Subject: [GiDlist] Postprocessing - Interpolation
Hello there!
Does GID have the capabalilities to interpolate a set of values associated
with a set of scattered data points to a generated mesh?
In a typical numerical work this might be done by Delauney
triangularization
of the scattered data points (2D problem) and then local interpolation
within each triangular to the vertices of the mesh.
Can anyone help with this request??
Alternatively can GID mesh through a set of scattered data points? Seems
to
me I need at least lines to mesh.
Many thanks
Tim Kendon
Imperial College
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
[GiDlist] Postprocessing - Interpolation
Posted: Thu Mar 14, 2002 2:07 pm
by Antonio Manoel Frasso
You can use the "triangle" software, is free and with code.
On Thu, 14 Mar 2002, Enrique Escolano wrote:
Internally, GiD can create a Delaunay mesh or triangles from a set or points
(2D or 3D projected in 2D), but this capability is not public.
You can use some program as "Surfer" (www.goldensoftware.com) for your
pourposes.
Enrique Escolano
----- Original Message -----
From: "Kendon, Tim" t.kendon at ic.ac.uk
To: "'gidlist at gid.cimne.upc.es'" gidlist at gatxan.cimne.upc.es
Sent: Thursday, March 14, 2002 10:46 AM
Subject: [GiDlist] Postprocessing - Interpolation
Hello there!
Does GID have the capabalilities to interpolate a set of values associated
with a set of scattered data points to a generated mesh?
In a typical numerical work this might be done by Delauney
triangularization
of the scattered data points (2D problem) and then local interpolation
within each triangular to the vertices of the mesh.
Can anyone help with this request??
Alternatively can GID mesh through a set of scattered data points? Seems
to
me I need at least lines to mesh.
Many thanks
Tim Kendon
Imperial College
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
[GiDlist] Postprocessing - Interpolation
Posted: Thu Mar 14, 2002 2:46 pm
by Antonio Manoel Frasso
The address of "triangle:
http://www-2.cs.cmu.edu/~quake/triangle.html
On Thu, 14 Mar 2002, Antonio Manoel Frasso wrote:
You can use the "triangle" software, is free and with code.
On Thu, 14 Mar 2002, Enrique Escolano wrote:
Internally, GiD can create a Delaunay mesh or triangles from a set or points
(2D or 3D projected in 2D), but this capability is not public.
You can use some program as "Surfer" (www.goldensoftware.com) for your
pourposes.
Enrique Escolano
----- Original Message -----
From: "Kendon, Tim" t.kendon at ic.ac.uk
To: "'gidlist at gid.cimne.upc.es'" gidlist at gatxan.cimne.upc.es
Sent: Thursday, March 14, 2002 10:46 AM
Subject: [GiDlist] Postprocessing - Interpolation
Hello there!
Does GID have the capabalilities to interpolate a set of values associated
with a set of scattered data points to a generated mesh?
In a typical numerical work this might be done by Delauney
triangularization
of the scattered data points (2D problem) and then local interpolation
within each triangular to the vertices of the mesh.
Can anyone help with this request??
Alternatively can GID mesh through a set of scattered data points? Seems
to
me I need at least lines to mesh.
Many thanks
Tim Kendon
Imperial College
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist