GiD forum

Hi
Is it possible to add comments into condition & problem files? putting *# at
the beginning of a line does not work.

Also is it possible to automatically assign all surfaces with a specified
material to a specified surface condition? rather than have to do it
manually?
Thanks in advance.
Regards
Mark

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.512 / Virus Database: 309 - Release Date: 19/08/2003



The information contained in this e-mail message (and any attachment
transmitted herewith) is privileged and confidential and is intended for the
exclusive use of the addressee(s). If you are not an addressee, any
disclosure, reproduction, distribution or other dissemination or use of this
communication is strictly prohibited. If you have received this
communication in error, please contact us immediately so that we can correct
the error.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030901/854b9a81/attachment.htm

*# is only valid for the template *.bas file, but can use a "COMMENT:" field inside a condition, material or problem data.
Using the last GiD 7.4.3b beta version , I'ts also available to use blank lines (for a more user readable *.cnd or *prb file)

Enrique Escolano
----- Original Message -----
From: Mark Smith
To: 'gidlist at gatxan.cimne.upc.es'
Sent: Monday, September 01, 2003 4:06 PM
Subject: [GiDlist] .cnd & .prb files


Hi
Is it possible to add comments into condition & problem files? putting *# at the beginning of a line does not work.

Also is it possible to automatically assign all surfaces with a specified material to a specified surface condition? rather than have to do it manually?
Thanks in advance.
Regards
Mark


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.512 / Virus Database: 309 - Release Date: 19/08/2003





The information contained in this e-mail message (and any attachment transmitted herewith) is privileged and confidential and is intended for the exclusive use of the addressee(s). If you are not an addressee, any disclosure, reproduction, distribution or other dissemination or use of this communication is strictly prohibited. If you have received this communication in error, please contact us immediately so that we can correct the error.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030902/6ec94148/attachment.htm

Currently is not posible to select entities by material, for next versions can add this option using a selection filter
(see Utilities-Graphical-Selection window).

Enrique
----- Original Message -----
From: Mark Smith
To: 'gidlist at gatxan.cimne.upc.es'
Sent: Monday, September 01, 2003 4:06 PM
Subject: [GiDlist] .cnd & .prb files


Hi
Is it possible to add comments into condition & problem files? putting *# at the beginning of a line does not work.

Also is it possible to automatically assign all surfaces with a specified material to a specified surface condition? rather than have to do it manually?
Thanks in advance.
Regards
Mark


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.512 / Virus Database: 309 - Release Date: 19/08/2003





The information contained in this e-mail message (and any attachment transmitted herewith) is privileged and confidential and is intended for the exclusive use of the addressee(s). If you are not an addressee, any disclosure, reproduction, distribution or other dissemination or use of this communication is strictly prohibited. If you have received this communication in error, please contact us immediately so that we can correct the error.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030902/7270e9ed/attachment.htm

Hello,

It is not possible by now to add comments to the .prb or .cnd files.

It should be easy to automatize this kind of assignation of materials
by using TCL. Typically,
your problemtype would substitute the meshing command by a modified
meshing that also
calls your code for making the automatation. Check module Tdyn in
internet retrieve. There,
similar things are being done.

Regards,

--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com http://www.compassis.com/
ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Mark Smith
Enviado el: lunes, 01 de septiembre de 2003 16:07
Para: 'gidlist at gatxan.cimne.upc.es'
Asunto: [GiDlist] .cnd & .prb files


Hi
Is it possible to add comments into condition & problem files? putting
*# at the beginning of a line does not work.

Also is it possible to automatically assign all surfaces with a
specified material to a specified surface condition? rather than have to
do it manually?
Thanks in advance.
Regards
Mark


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.512 / Virus Database: 309 - Release Date: 19/08/2003




The information contained in this e-mail message (and any attachment
transmitted herewith) is privileged and confidential and is intended for
the exclusive use of the addressee(s). If you are not an addressee, any
disclosure, reproduction, distribution or other dissemination or use of
this communication is strictly prohibited. If you have received this
communication in error, please contact us immediately so that we can
correct the error.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030902/64534154/attachment.htm