Page 1 of 1
[GiDlist] Conditions
Posted: Wed Jul 30, 2003 9:43 am
by kalo81 at virgilio.it
Hi everyone,
I assign some conditions with some values, but whe iI read the file **.cnd,in
the field VALUE there is default value.Why?
And then, when I Unassign all condition i think that file **.cnd should
be erase, but it is there with the previous value.
Thanks in advance!
Calogero.
[GiDlist] Conditions
Posted: Wed Jul 30, 2003 11:53 am
by Enrique Escolano
The file *.cnd contain the template of the condition (questions and default
values),
but not contain the instances of this template (the values and assigned
entities).
This condition instances are saved in the *.lin binary file.
Enrique Escolano
----- Original Message -----
From:
kalo81 at virgilio.it
To: "GIDLIST"
gidlist at gatxan.cimne.upc.es
Sent: Wednesday, July 30, 2003 10:42 AM
Subject: [GiDlist] Conditions
Hi everyone,
I assign some conditions with some values, but whe iI read the file
**.cnd,in
the field VALUE there is default value.Why?
And then, when I Unassign all condition i think that file **.cnd should
be erase, but it is there with the previous value.
Thanks in advance!
Calogero.
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
[GiDlist] How to include different types of .res files
Posted: Thu Jul 31, 2003 5:25 am
by VSayako Willy
Hi GiD Team and all
I would like to display the Outputs in .res file in
different types of Analysis. For example: I have
output in "Linear Static case" and "Non Linear with
Time step" "Influence line" and so forth..
How can I Include these results in PostProcessing
file??
Can we use the command "include"? if so how? Please
give small example.
Best Regards
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
[GiDlist] How to include different types of .res files
Posted: Thu Jul 31, 2003 7:38 am
by Miguel A. de Riera Pasenau
You can write these results in the same .res file:
GiD Post Results File 1.0
...
Result "damage" "Linear Static case" 0.0 Scalar OnNodes
...
Result "damage evolution" "Non linear with time step" 1.0 Scalar OnNodes
...
and so on.
You can alo use "include", like this:
GiD Post Results File 1.0
...
include "My Other Results File"
...
include "another file"
...
and so on.
miguel
VSayako Willy wrote:
Hi GiD Team and all
I would like to display the Outputs in .res file in
different types of Analysis. For example: I have
output in "Linear Static case" and "Non Linear with
Time step" "Influence line" and so forth..
How can I Include these results in PostProcessing
file??
Can we use the command "include"? if so how? Please
give small example.
Best Regards
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera
miguel at cimne.upc.es http://gid.cimne.upc.es
[GiDlist] How to include different types of .res files
Posted: Fri Aug 01, 2003 11:53 am
by VSayako Willy
Many thanks Miguel
Please take a look my attached file and Please
advice what's wrong in the file format. I also
included the OldFormat of the .res file. Both are not
working properly
Best regards.
--- "Miguel A. de Riera Pasenau"
miguel at cimne.upc.es
wrote:
You can write these results in the same .res file:
GiD Post Results File 1.0
...
Result "damage" "Linear Static case" 0.0 Scalar
OnNodes
...
Result "damage evolution" "Non linear with time
step" 1.0 Scalar OnNodes
...
and so on.
You can alo use "include", like this:
GiD Post Results File 1.0
...
include "My Other Results File"
...
include "another file"
...
and so on.
miguel
VSayako Willy wrote:
Hi GiD Team and all
I would like to display the Outputs in .res
file in
different types of Analysis. For example: I have
output in "Linear Static case" and "Non Linear
with
Time step" "Influence line" and so forth..
How can I Include these results in PostProcessing
file??
Can we use the command "include"? if so how?
Please
give small example.
Best Regards
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site
design software
http://sitebuilder.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera miguel at cimne.upc.es
http://gid.cimne.upc.es
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BridgeTest.gid.zip
Type: application/x-zip-compressed
Size: 2689 bytes
Desc: BridgeTest.gid.zip
Url :
http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030801/c6c1aa19/attachment.bin
[GiDlist] How to include different types of .res files
Posted: Fri Aug 01, 2003 1:54 pm
by Miguel A. de Riera Pasenau
Hi,
just add a new-line after the last 'end values' line.
miguel
VSayako Willy wrote:
Many thanks Miguel
Please take a look my attached file and Please
advice what's wrong in the file format. I also
included the OldFormat of the .res file. Both are not
working properly
Best regards.
--- "Miguel A. de Riera Pasenau" miguel at cimne.upc.es
wrote:
You can write these results in the same .res file:
GiD Post Results File 1.0
...
Result "damage" "Linear Static case" 0.0 Scalar
OnNodes
...
Result "damage evolution" "Non linear with time
step" 1.0 Scalar OnNodes
...
and so on.
You can alo use "include", like this:
GiD Post Results File 1.0
...
include "My Other Results File"
...
include "another file"
...
and so on.
miguel
VSayako Willy wrote:
Hi GiD Team and all
I would like to display the Outputs in .res
file in
different types of Analysis. For example: I have
output in "Linear Static case" and "Non Linear
with
Time step" "Influence line" and so forth..
How can I Include these results in PostProcessing
file??
Can we use the command "include"? if so how?
Please
give small example.
Best Regards
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site
design software
http://sitebuilder.yahoo.com
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera miguel at cimne.upc.es
http://gid.cimne.upc.es
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
------------------------------------------------------------------------------------------------------------------------------------
Name: BridgeTest.gid.zip
BridgeTest.gid.zip Type: Zip Compressed Data (application/x-zip-compressed)
Encoding: base64
Description: BridgeTest.gid.zip
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera
miguel at cimne.upc.es http://gid.cimne.upc.es