GiD forum

A forum about any subject related to GiD and intending to solve general usage questions and comments about GiD.
https://forum.gidsimulation.com/

[GiDlist] A question about Mesh extrusion

https://forum.gidsimulation.com/viewtopic.php?t=1845

Page 1 of 1

[GiDlist] A question about Mesh extrusion

Posted: Mon Jul 28, 2003 9:37 am
by edodo
Dear,Enrique Escolano
Thanks.
How can I set boundaries(such as surface load) on the Hexahra element,I only Can set the Load on the first surface ,I can't set it on the create element surface.

BTW,What's mean of S_i S_ii S_iii in the menu ViewRests Which the rest files used the matrix type in postpress.


======= 2003-07-25 23:02:00 You wrote：=======

Yes, This is a bug (a variable not initialized), with random results.
It'is corrected for the next beta version (the next week be available).

Note: It's possible to generate prims by triangle extrusion, but this
element type has a very small support in GiD at this moment (cannot be
loaded in postprocess or see boundaries in preprocess, etc).

Thanks for your bug report.

Enrique Escolano

----- Original Message -----
From: "edodo" fea at eyou.com
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, July 25, 2003 3:52 AM
Subject: Re: Re: Re: [GiDlist] A question about Mesh extrusion


Dear,sir/madam,Enrique Escolano

There is a sample in attached files. You should tanslate to Mesh view in
Gid When you open the files of "sa.gid",And I create a bach file,butTHe
model which you import bach files are better than the sa.gid,but there are
some wrong on the boundary.
 BTW,I will get different model when i import sa.bch? Why?
 Thanks for your help


======= 2003-07-24 14:53:00 You wrote：=======

Send us a small sample and the procedure to obtain this error.

Note: If you use a version previous to 7.4.2-b, must update (from the web
section download beta versions). Some bugs can be corrected.

Enrique
----- Original Message -----
From: "edodo" fea at eyou.com
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, July 24, 2003 3:12 AM
Subject: Re: Re: [GiDlist] A question about Mesh extrusion


Dear,Enrique Escolano

Thanks
 There are some error in this way when I use Offest.Can you help me.

======= 2003-07-22 20:26:00 You wrote：=======

This feature is also available in previous 7.x versions.
 Select mesh view, and then open the "copy window".
Can extrude elements by translation, rotation, etc.
Enrique
----- Original Message -----
From: "edodo" fea at eyou.com
 To: gidlist at gatxan.cimne.upc.es
 Sent: Tuesday, July 22, 2003 11:00 AM
 Subject: [GiDlist] A question about Mesh extrusion

Dear GiD teams
 There are a new availab in GID 7.4.2b of Mesh extrusion,But I can't
 find it in Copy windows! Can you help me?


Fegen software Co.,Ltd
 http://www.fegensoft.com/english
 086-10-82131600
 086-10-82121900
 ShaolinZhou
 fea at eyou.com
 2003-07-22


_______________________________________________
 GiDlist mailing list
 GiDlist at gid.cimne.upc.es
 http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
 GiDlist mailing list
 GiDlist at gid.cimne.upc.es
 http://gid.cimne.upc.es/mailman/listinfo/gidlist

= = = = = = = = = = = = = = = = = = = =




Fegen software Co.,Ltd
 http://www.fegensoft.com/english
 086-10-82131600
 086-10-82121900
 ShaolinZhou
 fea at eyou.com
 2003-07-24



_______________________________________________
 GiDlist mailing list
 GiDlist at gid.cimne.upc.es
 http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

= = = = = = = = = = = = = = = = = = = =




Fegen software Co.,Ltd
http://www.fegensoft.com/english
086-10-82131600
086-10-82121900
ShaolinZhou
fea at eyou.com
2003-07-25

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

= = = = = = = = = = = = = = = = = = = =




Fegen software Co.,Ltd
http://www.fegensoft.com/english
086-10-82131600
086-10-82121900
ShaolinZhou
fea at eyou.com
2003-07-28

[GiDlist] A question about Mesh extrusion

Posted: Wed Jul 30, 2003 7:38 pm
by Enrique Escolano
I don't understand your questions, but i try to request it:

How can I set boundaries(such as surface load) on the Hexahra element,I only Can set the Load on the first surface ,I can't set it on the create element surface.


If you want to apply a condition 'over face elems' directly over the mesh, instead to over the surfaces and after generate the mesh, it exists some
problems:

It is not possible to select a face, it's needed to select a element, and
GiD automatically apply this conditions over the boundary faces (the interface betwheen two materials is considered also boundary)

If your condition is defined CanRepeat: No (by default), then only is applied
the condition over one face by element, else is applied a condition foreach boundary face. Probably you must set CanRepeat: yes in the *.cnd file.

BTW,What's mean of S_i S_ii S_iii in the menu ViewRests Which the rest files used the matrix type in postpress.

Si, Sii and Siii represent the eigen values & vectors of the symmetric tensor matrix results which are calculated by GiD, and which are ordered according to the eigen value.

Enrique Escolano

----- Original Message -----
From: "edodo" fea at eyou.com
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, July 28, 2003 10:36 AM
Subject: Re: Re: Re: Re: [GiDlist] A question about Mesh extrusion


Dear,Enrique Escolano
 Thanks.
 How can I set boundaries(such as surface load) on the Hexahra element,I only Can set the Load on the first surface ,I can't set it on the create element surface.
BTW,What's mean of S_i S_ii S_iii in the menu ViewRests Which the rest files used the matrix type in postpress.


======= 2003-07-25 23:02:00 You wrote：=======
Yes, This is a bug (a variable not initialized), with random results.
 It'is corrected for the next beta version (the next week be available).
Note: It's possible to generate prims by triangle extrusion, but this
 element type has a very small support in GiD at this moment (cannot be
 loaded in postprocess or see boundaries in preprocess, etc).
Thanks for your bug report.
Enrique Escolano
----- Original Message -----
From: "edodo" fea at eyou.com
 To: gidlist at gatxan.cimne.upc.es
 Sent: Friday, July 25, 2003 3:52 AM
 Subject: Re: Re: Re: [GiDlist] A question about Mesh extrusion

Dear,sir/madam,Enrique Escolano
There is a sample in attached files. You should tanslate to Mesh view in
 Gid When you open the files of "sa.gid",And I create a bach file,butTHe
 model which you import bach files are better than the sa.gid,but there are
 some wrong on the boundary.
 BTW,I will get different model when i import sa.bch? Why?
 Thanks for your help

======= 2003-07-24 14:53:00 You wrote：=======
Send us a small sample and the procedure to obtain this error.
Note: If you use a version previous to 7.4.2-b, must update (from the web
 section download beta versions). Some bugs can be corrected.
Enrique
 ----- Original Message -----
From: "edodo" fea at eyou.com
 To: gidlist at gatxan.cimne.upc.es
 Sent: Thursday, July 24, 2003 3:12 AM
 Subject: Re: Re: [GiDlist] A question about Mesh extrusion

Dear,Enrique Escolano
Thanks
 There are some error in this way when I use Offest.Can you help me.
======= 2003-07-22 20:26:00 You wrote：=======
This feature is also available in previous 7.x versions.
 Select mesh view, and then open the "copy window".
Can extrude elements by translation, rotation, etc.
Enrique
----- Original Message -----
From: "edodo" fea at eyou.com
 To: gidlist at gatxan.cimne.upc.es
 Sent: Tuesday, July 22, 2003 11:00 AM
 Subject: [GiDlist] A question about Mesh extrusion

Dear GiD teams
 There are a new availab in GID 7.4.2b of Mesh extrusion,But I can't
 find it in Copy windows! Can you help me?


Fegen software Co.,Ltd
 http://www.fegensoft.com/english
 086-10-82131600
 086-10-82121900
 ShaolinZhou
 fea at eyou.com
 2003-07-22


_______________________________________________
 GiDlist mailing list
 GiDlist at gid.cimne.upc.es
 http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
 GiDlist mailing list
 GiDlist at gid.cimne.upc.es
 http://gid.cimne.upc.es/mailman/listinfo/gidlist
= = = = = = = = = = = = = = = = = = = =



Fegen software Co.,Ltd
 http://www.fegensoft.com/english
 086-10-82131600
 086-10-82121900
 ShaolinZhou
 fea at eyou.com
 2003-07-24


_______________________________________________
 GiDlist mailing list
 GiDlist at gid.cimne.upc.es
 http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
 GiDlist mailing list
 GiDlist at gid.cimne.upc.es
 http://gid.cimne.upc.es/mailman/listinfo/gidlist
= = = = = = = = = = = = = = = = = = = =



Fegen software Co.,Ltd
 http://www.fegensoft.com/english
 086-10-82131600
 086-10-82121900
 ShaolinZhou
 fea at eyou.com
 2003-07-25
_______________________________________________
 GiDlist mailing list
 GiDlist at gid.cimne.upc.es
 http://gid.cimne.upc.es/mailman/listinfo/gidlist
= = = = = = = = = = = = = = = = = = = =



Fegen software Co.,Ltd
http://www.fegensoft.com/english
 086-10-82131600
 086-10-82121900
 ShaolinZhou
 fea at eyou.com
 2003-07-28


_______________________________________________
 GiDlist mailing list
 GiDlist at gid.cimne.upc.es
 http://gid.cimne.upc.es/mailman/listinfo/gidlist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030730/12b2b9f0/attachment.htm
All times are UTC+01:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited