GiD forum

Hi everyone,
I'm using GiD 7.4.9 b in Windows for post processing files of 3D elasticity and the
command:

label Select resultonview (using the mouse)

seems not to work. My result is a gauss points one.
To have a quick look at the result values I have to zoom so that the displayed part
contains only few elements and than use

label resultonview
.

I had the same problem with previous versions of GiD but it seemed to be rotation
dependent: the command worked if the labels were mostly outside the model surface.
With this version the command never works.

I append a zip file with an example called "Slab_4.gid".

Thanks for any help.



Andrea Calaon

Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com

Hi, i did not receive the file. Perhaps is because of the double extension that
the antivirus mail parses deletes it.
Pleas try with something like slab_4_gid.rar

thanks

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Andrea Calaon
Enviado el: viernes, 13 de agosto de 2004 11:51
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Problems with lable select res

Hi everyone,
I'm using GiD 7.4.9 b in Windows for post processing files of 3D elasticity and
the
command:

label Select resultonview (using the mouse)

seems not to work. My result is a gauss points one.
To have a quick look at the result values I have to zoom so that the displayed
part contains only few elements and than use

label resultonview
.

I had the same problem with previous versions of GiD but it seemed to be
rotation
dependent: the command worked if the labels were mostly outside the model
surface.
With this version the command never works.

I append a zip file with an example called "Slab_4.gid".

Thanks for any help.



Andrea Calaon

Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

I do not understand very well the problem. I displayed, for instance, a controu
fill of Stress#T and then i've done 'label-select-results' and then selected
some gauss points and then it displayed its results values: LabelGPResults.gif

But if the problem lies in the size of the font used to display de labels, in
the 'Utilities-preferences' window there is a 'font' panel, from where you can
select the type and size of the font used to draw the labels, under the text
'Label/Dimensions Font'.

Hope it helps,

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Miguel A. Pasenau de
Riera
Enviado el: viernes, 13 de agosto de 2004 12:48
Para: gidlist at gatxan.cimne.upc.es
Asunto: RE: [GiDlist] Problems with lable select res

Hi, i did not receive the file. Perhaps is because of the double extension that
the antivirus mail parses deletes it.
Pleas try with something like slab_4_gid.rar

thanks

miguel

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Andrea Calaon Enviado
el: viernes, 13 de agosto de 2004 11:51
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Problems with lable select res

Hi everyone,
I'm using GiD 7.4.9 b in Windows for post processing files of 3D elasticity and
the
command:

label Select resultonview (using the mouse)

seems not to work. My result is a gauss points one.
To have a quick look at the result values I have to zoom so that the displayed
part contains only few elements and than use

label resultonview
.

I had the same problem with previous versions of GiD but it seemed to be
rotation
dependent: the command worked if the labels were mostly outside the model
surface.
With this version the command never works.

I append a zip file with an example called "Slab_4.gid".

Thanks for any help.



Andrea Calaon

Ashurst Lodge, Ashurst
Southampton, Hampshire
SO40 7AA, UK
Tel. office: +44 23 80 293 223
Fax office: +44 23 80 292 853
Mobile: +44 7766 488 225
E-mail: andrea at beasy.com

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

-------------- next part --------------
A non-text attachment was scrubbed...
Name: LabelGPResults.gif
Type: image/gif
Size: 332539 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040813/410a68df/attachment.gif

Dear Miguel,

I try now following working configuration.
Client: Windows XP
-GiD 7.4 (pre- and post)
Server: Redhat Linux
-Fortran90 (solver)

In GiD, I notice, we can use "calculate remote". I try using all the
required information, but it doesn't work.
My questions:
1. What kind of connection do you use? must I chage some settings on the
server-side?
2. Where must I put the name (incl. path) of the program on the linux
machine? The data required is only: Remote server, Group, User and Password.
How do you know where the FEM-program is?

Another question is, if I "mount" or map a network directory in Windows XP,
can I open in GiD the mapped files, so that I can let model- and
result-files on the server? If yes, please inform me, then I will start to
install Samba on linux for this purpose.

Thanks a lot for your help!!

Rafael

The 'calculate remote' option require another CIMNE's program, installed on
the server machine: ProcServer (and the problemtype off course)
GiD directly comunicates (using TCP/IP) with ProcServer to send and retrieve
the calculation information.

Note: At this moment procserver is not available for public download.

I think that GiD can access without problems to a mapped network directory
in Windows XP,

Regards
Enrique Escolano
----- Original Message -----
From: "Rafael Doig" rafadoig at hiroshima-u.ac.jp
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, August 18, 2004 4:52 AM
Subject: [GiDlist] Calculate Remote


Dear Miguel,

I try now following working configuration.
Client: Windows XP
-GiD 7.4 (pre- and post)
Server: Redhat Linux
-Fortran90 (solver)

In GiD, I notice, we can use "calculate remote". I try using all the
required information, but it doesn't work.
My questions:
1. What kind of connection do you use? must I chage some settings on the
server-side?
2. Where must I put the name (incl. path) of the program on the linux
machine? The data required is only: Remote server, Group, User and
Password.
How do you know where the FEM-program is?

Another question is, if I "mount" or map a network directory in Windows
XP,
can I open in GiD the mapped files, so that I can let model- and
result-files on the server? If yes, please inform me, then I will start to
install Samba on linux for this purpose.

Thanks a lot for your help!!

Rafael


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist