GiD forum

Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040128/0c31d4dc/attachment.htm

I don't understand your question.
If do you want to add a previous model to the current one, must use the menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano
----- Original Message -----
From: dganit
To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files


Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040128/e52e7c14/attachment.htm

I want to create the geometry outside GiD.
What should be the format of the file to be able to do so ?

Thanks,
Dganit
----- Original Message -----
From: Enrique Escolano
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, January 28, 2004 1:29 PM
Subject: Re: [GiDlist] Preprocess Files


I don't understand your question.
If do you want to add a previous model to the current one, must use the menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano
----- Original Message -----
From: dganit
To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files


Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040129/902b0667/attachment.htm

I attach a not oficial documentation, written in spanish, about the GiD *.geo ASCII format.

Regards

Enrique Escolano
----- Original Message -----
From: dganit
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, January 29, 2004 9:22 PM
Subject: Re: [GiDlist] Preprocess Files


I want to create the geometry outside GiD.
What should be the format of the file to be able to do so ?

Thanks,
Dganit
----- Original Message -----
From: Enrique Escolano
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, January 28, 2004 1:29 PM
Subject: Re: [GiDlist] Preprocess Files


I don't understand your question.
If do you want to add a previous model to the current one, must use the menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano
----- Original Message -----
From: dganit
To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files


Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/6117f3dd/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Formato gid 6.2b.pdf
Type: application/pdf
Size: 39203 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/6117f3dd/attachment.pdf

Hello,

If you want to create geometry outside of GiD and import it in GiD,
you should
use one of the standard geometry interchange files that GiD supports,
These are
the following: DXF, IGES, PARASOLID, ACIS.

Regards,

--
Compass Ing. y Sistemas Dr. Ramon Ribo
http://www.compassis.com http://www.compassis.com/
ramsan at compassis.com
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82
08034 Barcelona, Spain fax. +34 93 204 19 09

-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.es
[mailto:gidlist-admin at gatxan.cimne.upc.es] En nombre de Enrique Escolano
Enviado el: viernes, 30 de enero de 2004 11:01
Para: gidlist at gatxan.cimne.upc.es
Asunto: Re: [GiDlist] Preprocess Files


I attach a not oficial documentation, written in spanish, about the GiD
*.geo ASCII format.

Regards

Enrique Escolano

----- Original Message -----
From: dganit mailto:dganit at hahotrim.com
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, January 29, 2004 9:22 PM
Subject: Re: [GiDlist] Preprocess Files

I want to create the geometry outside GiD.
What should be the format of the file to be able to do so ?

Thanks,
Dganit

----- Original Message -----
From: Enrique mailto:escolano at cimne.upc.es Escolano
To: gidlist at gatxan.cimne.upc.es
Sent: Wednesday, January 28, 2004 1:29 PM
Subject: Re: [GiDlist] Preprocess Files

I don't understand your question.
If do you want to add a previous model to the current one, must use the
menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano

----- Original Message -----
From: dganit mailto:dganit at hahotrim.com
To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files

Hello everyone,

I want to open a pre-defined file in the preprocss, that already
contains the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/1949d681/attachment.htm

Hello Gid Team,

I have indeed wrote my data on ASCII Techplot format for 3D structures but
GID keep crashing when I import the *.dat file for the first try, when I re
open GID and import the file, GID work.

Best Regards,

At 05:01 AM 1/30/2004, you wrote:
I attach a not oficial documentation, written in spanish, about the GiD
*.geo ASCII format.

Regards

Enrique Escolano
----- Original Message -----
From: mailto:dganit at hahotrim.comdganit
To: mailto:gidlist at gatxan.cimne.upc.esgidlist at gatxan.cimne.upc.es
Sent: Thursday, January 29, 2004 9:22 PM
Subject: Re: [GiDlist] Preprocess Files

I want to create the geometry outside GiD.
What should be the format of the file to be able to do so ?

Thanks,
Dganit
----- Original Message -----
From: mailto:escolano at cimne.upc.esEnrique Escolano
To: mailto:gidlist at gatxan.cimne.upc.esgidlist at gatxan.cimne.upc.es
Sent: Wednesday, January 28, 2004 1:29 PM
Subject: Re: [GiDlist] Preprocess Files

I don't understand your question.
If do you want to add a previous model to the current one, must use the
menu: Files-Import-Insert GiD Geometry...

Regards
Enrique Escolano
----- Original Message -----
From: mailto:dganit at hahotrim.comdganit
To: mailto:gidlist at gatxan.cimne.upc.esgidlist at gatxan.cimne.upc.es ;
mailto:dganit at evs.co.ildganit at evs.co.il
Sent: Tuesday, January 27, 2004 7:25 PM
Subject: [GiDlist] Preprocess Files

Hello everyone,

I want to open a pre-defined file in the preprocss, that already contains
the "shape" information.
Is it possible, and if it is how can I do it ?

Thanks,
Dganit


Khaled Obeidat
Research Engineer
EMAG Technologies, Inc.
www.emagtechnologies.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/76df74b5/attachment.htm

Please, send us this Tecplot sample file to check it.
(send directly to escolano at cimne.upc.es)

Enrique Escolano
----- Original Message -----
From: Khaled Obeidat
To: gidlist at gatxan.cimne.upc.es
Sent: Friday, January 30, 2004 4:00 PM
Subject: Re: [GiDlist] Preprocess Files


Hello Gid Team,

I have indeed wrote my data on ASCII Techplot format for 3D structures but GID keep crashing when I import the *.dat file for the first try, when I re open GID and import the file, GID work.

Best Regards,

At 05:01 AM 1/30/2004, you wrote:

I attach a not oficial documentation, written in spanish, about the GiD *.geo ASCII format.

Regards

Enrique Escolano

----- Original Message -----

From: dganit

To: gidlist at gatxan.cimne.upc.es

Sent: Thursday, January 29, 2004 9:22 PM

Subject: Re: [GiDlist] Preprocess Files


I want to create the geometry outside GiD.

What should be the format of the file to be able to do so ?



Thanks,

Dganit

----- Original Message -----

From: Enrique Escolano

To: gidlist at gatxan.cimne.upc.es

Sent: Wednesday, January 28, 2004 1:29 PM

Subject: Re: [GiDlist] Preprocess Files


I don't understand your question.

If do you want to add a previous model to the current one, must use the menu: Files-Import-Insert GiD Geometry...



Regards

Enrique Escolano

----- Original Message -----

From: dganit

To: gidlist at gatxan.cimne.upc.es ; dganit at evs.co.il

Sent: Tuesday, January 27, 2004 7:25 PM

Subject: [GiDlist] Preprocess Files


Hello everyone,



I want to open a pre-defined file in the preprocss, that already contains the "shape" information.

Is it possible, and if it is how can I do it ?



Thanks,

Dganit


Khaled Obeidat
Research Engineer
EMAG Technologies, Inc.
www.emagtechnologies.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20040130/f3fbb1b0/attachment.htm