[ GiDlist ] Units

[Jorge Suit Perez Ronda]

Hi Aldo,

if you write

QUESTION: Young's_modulus_E:#UNITS#
VALUE: 2.1e11Pa

it should work

there have being some corrections regarding units field and units systems
and will be available in the next release, although you can try the last
beta in

ftp://gid.cimne.upc.es/pub/gid_adds

what release of GiD are you ussing?

best regards,

Jorge Suit

Aldo Ghisi wrote:

Hello everybody,

a problem in the problem customization.
I don't know how to modify the unit field as indicated in the GiD manual
for the special fields.
If I only introduce the string #UNITS# after the property_name and the
unit, i.e. (in the file problem_name.mat)

QUESTION: Young's_modulus_E:#UNITS#
VALUE: 2.1e11Pa

and then I set the problem data

Data-Problem type-problem_name

the GiD crashes (I specify that without the unit, i.e. in the usual form

QUESTION: Young's_modulus_E:
VALUE: 2.1e11

it works!).

I used all other special fields and I found them excellent.
Regards

ALDO GHISI
Department of Structural Engineering
Politecnico di Milano
Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Tel.: +39 02 2399 4218
Fax.: +39 02 2399 4220
E_mail: aldo.ghisi at polimi.it

[Aldo Ghisi]

Hi Jorge,

I use GiD 6.1.2, operating system Win2000

I will try with GiD 6.1.4b, thank you.

Best regards
Aldo Ghisi

At 16.53 22/06/2001 +0200, you wrote:
Hi Aldo,

if you write

QUESTION: Young's_modulus_E:#UNITS#
VALUE: 2.1e11Pa

it should work

there have being some corrections regarding units field and units systems
and will be available in the next release, although you can try the last
beta in

ftp://gid.cimne.upc.es/pub/gid_adds

what release of GiD are you ussing?

best regards,

Jorge Suit

Aldo Ghisi wrote:

Hello everybody,

a problem in the problem customization.
I don't know how to modify the unit field as indicated in the GiD manual
for the special fields.
If I only introduce the string #UNITS# after the property_name and the
unit, i.e. (in the file problem_name.mat)

QUESTION: Young's_modulus_E:#UNITS#
VALUE: 2.1e11Pa

and then I set the problem data

Data-Problem type-problem_name

the GiD crashes (I specify that without the unit, i.e. in the usual form

QUESTION: Young's_modulus_E:
VALUE: 2.1e11

it works!).

I used all other special fields and I found them excellent.
Regards

ALDO GHISI
Department of Structural Engineering
Politecnico di Milano
Piazza Leonardo da Vinci 32, 20133 Milano, Italy
Tel.: +39 02 2399 4218
Fax.: +39 02 2399 4220
E_mail: aldo.ghisi at polimi.it