Dear,sir/madam,edodo
sorry
I forget to attach files in last mail.
======= 2003-07-17 11:48:00 You wrote£º=======
HI,All
I create a volume model,But I can't mesh it.You can find the Gid files in the attached files.Can you help me?
BTW,Is there Gid's Parralel version.
Thanks
======= 2003-07-03 15:00:00 You wrote£º=======
It has not sense to save a GiD condition in a database, because the contition field values are different for each
assignation to an entity. In other hand, a GiD material has usually constant values.
Enrique Escolano
----- Original Message -----
From: Jonas Forssell
To: gidlist at gatxan.cimne.upc.es
Sent: Thursday, July 03, 2003 1:47 PM
Subject: [GiDlist] Saving boundary conditions
Hello,
Is there a way to save a boundary condition setup, similar to what is possible for materials?
Thanks
/Jonas
Gå före i kön och få din sajt värderad på nolltid med Yahoo! Express
= = = = = = = = = = = = = = = = = = = =
Fegen software Co.,Ltd
http://www.fegensoft.com/english
086-10-82131600
086-10-82121900
ShaolinZhou
fea at eyou.com
2003-07-17
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist
= = = = = = = = = = = = = = = = = = = =
Fegen software Co.,Ltd
http://www.fegensoft.com/english
086-10-82131600
086-10-82121900
ShaolinZhou
fea at eyou.com
2003-07-17
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1.gid.rar
Type: application/octet-stream
Size: 2756 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030717/ce02b0f3/attachment.obj
[GiDlist] A question about Meshing
Moderator: GiD Team
-
Adisorn Owatsiriwong
[GiDlist] FEAP problem type
Dear GiD Team, GiD users
Is there a problem type (for solid mechanics) for Feap and Feappv available to download? Thank you in advanced.
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030719/b65502f0/attachment.htm
Is there a problem type (for solid mechanics) for Feap and Feappv available to download? Thank you in advanced.
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030719/b65502f0/attachment.htm
-
VSayako Willy
[GiDlist] FEAP problem type
Dear GiDList friend
Go and Check the following website:
http://www.bh.com/companions/fem
Good luck
--- Adisorn Owatsiriwong dollarbulldog at hotmail.com
wrote:
Dear GiD Team, GiD users
Is there a problem type (for solid mechanics)
for Feap and Feappv available to download? Thank
you in advanced.
Best regards,
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
Go and Check the following website:
http://www.bh.com/companions/fem
Good luck
--- Adisorn Owatsiriwong dollarbulldog at hotmail.com
wrote:
Dear GiD Team, GiD users
Is there a problem type (for solid mechanics)
for Feap and Feappv available to download? Thank
you in advanced.
Best regards,
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
-
Enrique Escolano
[GiDlist] FEAP problem type
You can download a old version of feap: Feap 7.4, including a small GiD problemtype, from this ftp:
ftp://www.gidhome.com/pub/gid_adds/problem_types/feap74_offer_win.zip
ftp://www.gidhome.com/pub/gid_adds/problem_types/feap74_offer_linux.zip
This is the FEAP ver 74 distribution.
It contains:
- GiD problemtype -- gid_feap.gid (copy it into the directory 'problemtypes' in the GiD distribution)
- Feap program for Windows (feap.exe). It is inside the gid_feap.gid directory.
- Libraries to recompile the program with user routines:
-For Windows: check file 'readme.win' and directory 'library_win'
To create a Feap model from GiD:
- Install the problemtype (copy gid_feap.gid to the directory 'problemtypes'
in the GiD distribution)
- Open GiD
- Inside GiD, select from the menus: Data-Problemtype-gid_feap
- Create your model, assign boundary conditions, materials and loads
- Generate the mesh
- Press button 'Calculate-Calculate'. Feap program will appear.
- Note that for Feap advanced capabilities, it will be necessary to
edit the Feap input file in order to introduce additional data.
Regards
Enrique Escolano
----- Original Message -----
From: Adisorn Owatsiriwong
To: GiD
Sent: Saturday, July 19, 2003 7:40 PM
Subject: [GiDlist] FEAP problem type
Dear GiD Team, GiD users
Is there a problem type (for solid mechanics) for Feap and Feappv available to download? Thank you in advanced.
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030721/9ad33431/attachment.htm
ftp://www.gidhome.com/pub/gid_adds/problem_types/feap74_offer_win.zip
ftp://www.gidhome.com/pub/gid_adds/problem_types/feap74_offer_linux.zip
This is the FEAP ver 74 distribution.
It contains:
- GiD problemtype -- gid_feap.gid (copy it into the directory 'problemtypes' in the GiD distribution)
- Feap program for Windows (feap.exe). It is inside the gid_feap.gid directory.
- Libraries to recompile the program with user routines:
-For Windows: check file 'readme.win' and directory 'library_win'
To create a Feap model from GiD:
- Install the problemtype (copy gid_feap.gid to the directory 'problemtypes'
in the GiD distribution)
- Open GiD
- Inside GiD, select from the menus: Data-Problemtype-gid_feap
- Create your model, assign boundary conditions, materials and loads
- Generate the mesh
- Press button 'Calculate-Calculate'. Feap program will appear.
- Note that for Feap advanced capabilities, it will be necessary to
edit the Feap input file in order to introduce additional data.
Regards
Enrique Escolano
----- Original Message -----
From: Adisorn Owatsiriwong
To: GiD
Sent: Saturday, July 19, 2003 7:40 PM
Subject: [GiDlist] FEAP problem type
Dear GiD Team, GiD users
Is there a problem type (for solid mechanics) for Feap and Feappv available to download? Thank you in advanced.
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030721/9ad33431/attachment.htm
-
Adisorn Owatsiriwong
[GiDlist] FEAP problem type
Thanks GiD Teams for your supporting.
Bests Regards,
----- Original Message -----
From: Enrique Escolano
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, July 21, 2003 10:54 AM
Subject: Re: [GiDlist] FEAP problem type
You can download a old version of feap: Feap 7.4, including a small GiD problemtype, from this ftp:
ftp://www.gidhome.com/pub/gid_adds/problem_types/feap74_offer_win.zip
ftp://www.gidhome.com/pub/gid_adds/problem_types/feap74_offer_linux.zip
This is the FEAP ver 74 distribution.
It contains:
- GiD problemtype -- gid_feap.gid (copy it into the directory 'problemtypes' in the GiD distribution)
- Feap program for Windows (feap.exe). It is inside the gid_feap.gid directory.
- Libraries to recompile the program with user routines:
-For Windows: check file 'readme.win' and directory 'library_win'
To create a Feap model from GiD:
- Install the problemtype (copy gid_feap.gid to the directory 'problemtypes'
in the GiD distribution)
- Open GiD
- Inside GiD, select from the menus: Data-Problemtype-gid_feap
- Create your model, assign boundary conditions, materials and loads
- Generate the mesh
- Press button 'Calculate-Calculate'. Feap program will appear.
- Note that for Feap advanced capabilities, it will be necessary to
edit the Feap input file in order to introduce additional data.
Regards
Enrique Escolano
----- Original Message -----
From: Adisorn Owatsiriwong
To: GiD
Sent: Saturday, July 19, 2003 7:40 PM
Subject: [GiDlist] FEAP problem type
Dear GiD Team, GiD users
Is there a problem type (for solid mechanics) for Feap and Feappv available to download? Thank you in advanced.
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030721/d37cb51d/attachment.htm
Bests Regards,
----- Original Message -----
From: Enrique Escolano
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, July 21, 2003 10:54 AM
Subject: Re: [GiDlist] FEAP problem type
You can download a old version of feap: Feap 7.4, including a small GiD problemtype, from this ftp:
ftp://www.gidhome.com/pub/gid_adds/problem_types/feap74_offer_win.zip
ftp://www.gidhome.com/pub/gid_adds/problem_types/feap74_offer_linux.zip
This is the FEAP ver 74 distribution.
It contains:
- GiD problemtype -- gid_feap.gid (copy it into the directory 'problemtypes' in the GiD distribution)
- Feap program for Windows (feap.exe). It is inside the gid_feap.gid directory.
- Libraries to recompile the program with user routines:
-For Windows: check file 'readme.win' and directory 'library_win'
To create a Feap model from GiD:
- Install the problemtype (copy gid_feap.gid to the directory 'problemtypes'
in the GiD distribution)
- Open GiD
- Inside GiD, select from the menus: Data-Problemtype-gid_feap
- Create your model, assign boundary conditions, materials and loads
- Generate the mesh
- Press button 'Calculate-Calculate'. Feap program will appear.
- Note that for Feap advanced capabilities, it will be necessary to
edit the Feap input file in order to introduce additional data.
Regards
Enrique Escolano
----- Original Message -----
From: Adisorn Owatsiriwong
To: GiD
Sent: Saturday, July 19, 2003 7:40 PM
Subject: [GiDlist] FEAP problem type
Dear GiD Team, GiD users
Is there a problem type (for solid mechanics) for Feap and Feappv available to download? Thank you in advanced.
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030721/d37cb51d/attachment.htm
-
Adisorn Owatsiriwong
[GiDlist] mesh reading
Dear GiD teams
Does GiD support the way to remesh automatically during postprocessing; for example, in case of h-adaptivity can we view the results of the new meshes without interupting the process? By this way I think it should be necessary that multiple flavia.msh files must be stored, can we do so? Thank you in advanced.
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030721/a4fbdf4b/attachment.htm
Does GiD support the way to remesh automatically during postprocessing; for example, in case of h-adaptivity can we view the results of the new meshes without interupting the process? By this way I think it should be necessary that multiple flavia.msh files must be stored, can we do so? Thank you in advanced.
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20030721/a4fbdf4b/attachment.htm
-
Miguel A. de Riera Pasenau
[GiDlist] mesh reading
hi,
by now you can not view a different mesh for each step within GiD.
you have to save separate .msh and .res files foreach step and
read each pair in GiD.
we're working now in GiD so that it can handle different meshes
for each analysis step, for instance when there is a mesh refinement
during the analysis.
miguel
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera miguel at cimne.upc.es http://gid.cimne.upc.es
by now you can not view a different mesh for each step within GiD.
you have to save separate .msh and .res files foreach step and
read each pair in GiD.
we're working now in GiD so that it can handle different meshes
for each analysis step, for instance when there is a mesh refinement
during the analysis.
miguel
--
--------------------------------------------------------------------------------
Miguel A. Pasenau de Riera miguel at cimne.upc.es http://gid.cimne.upc.es