[GiDlist] code aster interface

[rovera.alessandro at libero.it]

I see that, but I have not understaind if this cd is free or it is a propertary disk.

Do code_aster the possibility to modellize contact and what kind (peanlty, lagrangian)?


---------- Initial Header -----------

[Martin Meiler]

Hello everybody,

can anybody confirm the behaviour of GiD while applying the following commands:

utilities variables UseMoreWindows 0 escape escape
utilities variables CreateAlwaysNewPoint -2 escape escape
geometry create object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-3 escape escape
*** GiD crashes and exits without any debug message

while

utilities variables UseMoreWindows 0 escape escape
utilities variables CreateAlwaysNewPoint -2 escape escape
geometry create object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-4 escape escape
utilities variables CreateAlwaysNewPoint 0 escape escape
utilities variables UseMoreWindows 1 escape escape

produces a cylinder with the given properties.


System Information:

Windows XP Professional SP 2
Processor: Intel Centrino 1.4 GHz
RAM: 512 MB

Since this behaviour doesn't show up when using the linux version, it must be an os
specific behaviour.


Can anybody tell me the cause of this behaviour or is this a bug?


Thanks for your help

Regards Martin



--
--------------------------------------------------------------------

_/ _/_/ _/_/_/ Friedrich Alexander Universität Erlangen
_/ _/ _/ _/ Lehrstuhl für Sensorik
_/ _/ _/ Paul-Gordanstr. 5, 91052 Erlangen, Germany
_/ _/_/ _/_/
_/ _/ _/ University of Erlangen
_/ _/ _/ _/ Department of Sensor Technology
_/_/_/ _/_/ _/_/_/ Paul-Gordanstr. 5, 91052 Erlangen, Germany


Dipl.-Ing. Martin Meiler

tel.: (+49)-9131-85-23140
fax.: (+49)-9131-85-23133

email: Martin.Meiler at lse.eei.uni-erlangen.de

[Guy HUBERT]

Dear Alessandro

Code_Aster simulates contacts between deformable bodies. The two methods are
implemented (penalty, Lagrangian).

The CD price is 300€ with 2hours of technical support included.

More information is available on EDF Code_Aster Website : www.code-aster.org

Guy HUBERT

-----Message d'origine-----
De : gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu]De la part de
rovera.alessandro at libero.it
Envoyé : lundi 30 mai 2005 13:44
À : gidlist
Objet : RE: [GiDlist] code aster interface


I see that, but I have not understaind if this cd is free or it is a
propertary disk.

Do code_aster the possibility to modellize contact and what kind (peanlty,
lagrangian)?


---------- Initial Header -----------

From : gidlist-admin at gatxan.cimne.upc.edu
To : gidlist at gatxan.cimne.upc.edu
Cc :
Date : Thu, 26 May 2005 14:48:41 +0200
Subject : RE: [GiDlist] code aster interface

Hello,

DeltaCAD has developped an input/output interface between GiD and the open
FEM software Code_Aster 7.1. This interface is integrated in a full
package
on a Cd-Rom for Windows and Linux.

More information on www.code-aster-services.com

Guy HUBERT

-----Message d'origine-----
De : gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu]De la part de
rovera.alessandro at libero.it
Envoyé : jeudi 26 mai 2005 14:01
À : gidlist
Objet : [GiDlist] code aster interface


hi all Gid users.
I ask for some question:

1) where is possible to download a code_aster interface for gid?
2) have code_aster the capability to model contact surface, and if yes,
what
kind of contact?

Bye, ALessandro Rovera



____________________________________________________________
6X velocizzare la tua navigazione a 56k? 6X Web Accelerator di Libero!
Scaricalo su INTERNET GRATIS 6X http://www.libero.it


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist





____________________________________________________________
6X velocizzare la tua navigazione a 56k? 6X Web Accelerator di Libero!
Scaricalo su INTERNET GRATIS 6X http://www.libero.it


_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

[escolano]

Hello.
I tried your commands with GiD 7.5.8b for Windows (I use Windows 2000), and
it worked ok
(I wrote your commands one by one in the command line)

What is your GiD version ? (see help-About)
Try to download the related 7.5.8b current last beta version.

Regards

Enrique
----- Original Message -----
From: "Martin Meiler" Martin.Meiler at lse.eei.uni-erlangen.de
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, May 30, 2005 2:35 PM
Subject: [GiDlist] GiD Bug?


Hello everybody,

can anybody confirm the behaviour of GiD while applying the following
commands:

utilities variables UseMoreWindows 0 escape escape
utilities variables CreateAlwaysNewPoint -2 escape escape
geometry create object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-3
escape escape
*** GiD crashes and exits without any debug message

while

utilities variables UseMoreWindows 0 escape escape
utilities variables CreateAlwaysNewPoint -2 escape escape
geometry create object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-4
escape escape
utilities variables CreateAlwaysNewPoint 0 escape escape
utilities variables UseMoreWindows 1 escape escape

produces a cylinder with the given properties.


System Information:

Windows XP Professional SP 2
Processor: Intel Centrino 1.4 GHz
RAM: 512 MB

Since this behaviour doesn't show up when using the linux version, it must
be an os
specific behaviour.


Can anybody tell me the cause of this behaviour or is this a bug?


Thanks for your help

Regards Martin



--
--------------------------------------------------------------------

_/ _/_/ _/_/_/ Friedrich Alexander Universität Erlangen
_/ _/ _/ _/ Lehrstuhl für Sensorik
_/ _/ _/ Paul-Gordanstr. 5, 91052 Erlangen, Germany
_/ _/_/ _/_/
_/ _/ _/ University of Erlangen
_/ _/ _/ _/ Department of Sensor Technology
_/_/_/ _/_/ _/_/_/ Paul-Gordanstr. 5, 91052 Erlangen, Germany


Dipl.-Ing. Martin Meiler

tel.: (+49)-9131-85-23140
fax.: (+49)-9131-85-23133

email: Martin.Meiler at lse.eei.uni-erlangen.de

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

[Martin Meiler]

Hello,

i have checked the behaviour of GiD with the following Versions

GiD 7.4.3b
GiD 7.5.8b

on Windows 2000 SP4 and Windows XP SP2, both german versions.

Are there any variables that are set differently in the linux and
the windows version concerning tolerances.

Since the created structure is much thinner than the diameter of the cylinder, there
could be problems with point creation tolerances, that match points on other points
and therefore can not extrude the surface correctly.

But that's just a guess.

Do you have any other hints where to find the problem.

I've been testing this behaviour on four different machines.

Regards Martin







From: "Enrique Escolano" escolano at cimne.upc.edu
To: gidlist at gatxan.cimne.upc.edu
Subject: {SPAM?} Re: [GiDlist] GiD Bug?
Date: Mon, 30 May 2005 19:06:22 +0200
Reply-To: gidlist at gid.cimne.upc.es

Hello.
I tried your commands with GiD 7.5.8b for Windows (I use Windows 2000), and
it worked ok
(I wrote your commands one by one in the command line)

What is your GiD version ? (see help-About)
Try to download the related 7.5.8b current last beta version.

Regards

Enrique
----- Original Message -----
From: "Martin Meiler" Martin.Meiler at lse.eei.uni-erlangen.de
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, May 30, 2005 2:35 PM
Subject: [GiDlist] GiD Bug?



Hello everybody,

can anybody confirm the behaviour of GiD while applying the following

commands:



utilities variables UseMoreWindows 0 escape escape
utilities variables CreateAlwaysNewPoint -2 escape escape
geometry create object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-3

escape escape

*** GiD crashes and exits without any debug message

while


utilities variables UseMoreWindows 0 escape escape
utilities variables CreateAlwaysNewPoint -2 escape escape
geometry create object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-4

escape escape

utilities variables CreateAlwaysNewPoint 0 escape escape
utilities variables UseMoreWindows 1 escape escape


produces a cylinder with the given properties.


System Information:

Windows XP Professional SP 2
Processor: Intel Centrino 1.4 GHz
RAM: 512 MB

Since this behaviour doesn't show up when using the linux version, it must

be an os

specific behaviour.


Can anybody tell me the cause of this behaviour or is this a bug?


Thanks for your help

Regards Martin

[Miguel A. Pasenau de Riera]

The default values are the same in windows as in Linux.
Could be the tolerances, but i don't belive it, because as you said that the
cylinder with 5e-4 height was created o.k. but not the one with height 5e-3 .
That is what is strange.

In a clean Windows XP SP2 actualized and with the german regional
configuration, i installed and started GiD, and tried the commands and worked,
both cylinders.

Althought the tolerance can be set at 'utilities-preferences-import', it does
not affect the creation of the cylinder.

Try deleting the gid preferences located in the gid.ini file inside a directory
like:

C:\Documents and Settings\YOUR_USER_NAME\Program Data\GiD
(well the german translation of program data --- Programdaten?)

regards

miguel


-----Mensaje original-----
De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de Martin Meiler
Enviado el: martes, 31 de mayo de 2005 9:59
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] Re: Re: GiD Bug?

Hello,

i have checked the behaviour of GiD with the following Versions

GiD 7.4.3b
GiD 7.5.8b

on Windows 2000 SP4 and Windows XP SP2, both german versions.

Are there any variables that are set differently in the linux and the windows
version concerning tolerances.

Since the created structure is much thinner than the diameter of the cylinder,
there could be problems with point creation tolerances, that match points on
other points and therefore can not extrude the surface correctly.

But that's just a guess.

Do you have any other hints where to find the problem.

I've been testing this behaviour on four different machines.

Regards Martin







From: "Enrique Escolano" escolano at cimne.upc.edu
To: gidlist at gatxan.cimne.upc.edu
Subject: {SPAM?} Re: [GiDlist] GiD Bug?
Date: Mon, 30 May 2005 19:06:22 +0200
Reply-To: gidlist at gid.cimne.upc.es

Hello.
I tried your commands with GiD 7.5.8b for Windows (I use Windows 2000), and it
worked ok (I wrote your commands one by one in the command line)

What is your GiD version ? (see help-About) Try to download the related 7.5.8b
current last beta version.

Regards

Enrique
----- Original Message -----
From: "Martin Meiler" Martin.Meiler at lse.eei.uni-erlangen.de
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, May 30, 2005 2:35 PM
Subject: [GiDlist] GiD Bug?



Hello everybody,

can anybody confirm the behaviour of GiD while applying the following

commands:



utilities variables UseMoreWindows 0 escape escape utilities
variables CreateAlwaysNewPoint -2 escape escape geometry create
object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-3

escape escape

*** GiD crashes and exits without any debug message

while


utilities variables UseMoreWindows 0 escape escape utilities
variables CreateAlwaysNewPoint -2 escape escape geometry create
object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-4

escape escape

utilities variables CreateAlwaysNewPoint 0 escape escape utilities
variables UseMoreWindows 1 escape escape


produces a cylinder with the given properties.


System Information:

Windows XP Professional SP 2
Processor: Intel Centrino 1.4 GHz
RAM: 512 MB

Since this behaviour doesn't show up when using the linux version, it
must

be an os

specific behaviour.


Can anybody tell me the cause of this behaviour or is this a bug?


Thanks for your help

Regards Martin

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

[gerard rio]

GID don't work on the new mac OS X tiger (10.4.1)
when I try to open a file to postprocess GID crash and I get an error
message:

dyld: lazy symbol binding failed: Symbol not found: _gluNewQuadric
Referenced from: /Volumes/OS9/GID/GiD7.2.1.app/Contents/MacOS/./
gid.exe
Expected in: /usr/X11R6/lib/libGL.1.dylib

Is there something new on lib GL ??
anyone knows what to do ??
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20050531/534ba31c/attachment.htm

[escolano]

In our tests it worked always well.

A detail, instead to use nojoin, can use Fnojoin (to force nojoin, without 'unexpected command error' if the current mode is already nojoin)
escape escape escape escape geometry create object cylinder Fnojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-3

In other hand, we changed GiD for the next beta version, to avoid to show the "enter normal" window and other popup windows if the user provided the answer, as your case.
then it is not necessary to disable windows (and after enable it again) with your command:
utilities variables UseMoreWindows 0 escape escape

Regards
Enrique Escolano

----- Original Message -----
From: "Martin Meiler" Martin.Meiler at lse.eei.uni-erlangen.de
To: gidlist at gatxan.cimne.upc.es
Sent: Tuesday, May 31, 2005 9:59 AM
Subject: [GiDlist] Re: Re: GiD Bug?


Hello,

i have checked the behaviour of GiD with the following Versions

GiD 7.4.3b
GiD 7.5.8b

on Windows 2000 SP4 and Windows XP SP2, both german versions.

Are there any variables that are set differently in the linux and
the windows version concerning tolerances.

Since the created structure is much thinner than the diameter of the cylinder, there
could be problems with point creation tolerances, that match points on other points
and therefore can not extrude the surface correctly.

But that's just a guess.

Do you have any other hints where to find the problem.

I've been testing this behaviour on four different machines.

Regards Martin







From: "Enrique Escolano" escolano at cimne.upc.edu
To: gidlist at gatxan.cimne.upc.edu
Subject: {SPAM?} Re: [GiDlist] GiD Bug?
Date: Mon, 30 May 2005 19:06:22 +0200
Reply-To: gidlist at gid.cimne.upc.es

Hello.
I tried your commands with GiD 7.5.8b for Windows (I use Windows 2000), and
it worked ok
(I wrote your commands one by one in the command line)

What is your GiD version ? (see help-About)
Try to download the related 7.5.8b current last beta version.

Regards

Enrique
----- Original Message -----
From: "Martin Meiler" Martin.Meiler at lse.eei.uni-erlangen.de
To: gidlist at gatxan.cimne.upc.es
Sent: Monday, May 30, 2005 2:35 PM
Subject: [GiDlist] GiD Bug?



Hello everybody,

can anybody confirm the behaviour of GiD while applying the following

commands:



utilities variables UseMoreWindows 0 escape escape
utilities variables CreateAlwaysNewPoint -2 escape escape
geometry create object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-3

escape escape

*** GiD crashes and exits without any debug message

while


utilities variables UseMoreWindows 0 escape escape
utilities variables CreateAlwaysNewPoint -2 escape escape
geometry create object cylinder nojoin 0,0,0 0.0,0.0,1.0 12.5e-3 5e-4

escape escape

utilities variables CreateAlwaysNewPoint 0 escape escape
utilities variables UseMoreWindows 1 escape escape


produces a cylinder with the given properties.


System Information:

Windows XP Professional SP 2
Processor: Intel Centrino 1.4 GHz
RAM: 512 MB

Since this behaviour doesn't show up when using the linux version, it must

be an os

specific behaviour.


Can anybody tell me the cause of this behaviour or is this a bug?


Thanks for your help

Regards Martin

_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.es
http://gid.cimne.upc.es/mailman/listinfo/gidlist

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20050531/d9f29800/attachment.htm

[miguel]

noted.
the problem seems that in the tiger version of MaxOSX there is no GLU library.
we only have used gid on version 10.2.1,without problems.
we still don't have verified GiD on version 10.4.1. until we can do it ¿can you
try to get this libGLU.dylib from a prior mac osx version, like 10.3 or 10.2?
or get it from apple?

miguel



_____

De: gidlist-admin at gatxan.cimne.upc.edu
[mailto:gidlist-admin at gatxan.cimne.upc.edu] En nombre de gerard rio
Enviado el: martes, 31 de mayo de 2005 15:38
Para: gidlist at gatxan.cimne.upc.es
Asunto: [GiDlist] GID on macos tiger (10.4.1) don't work


GID don't work on the new mac OS X tiger (10.4.1)
when I try to open a file to postprocess GID crash and I get an error message:


dyld: lazy symbol binding failed: Symbol not found: _gluNewQuadric
Referenced from: /Volumes/OS9/GID/GiD7.2.1.app/Contents/MacOS/./gid.exe
Expected in: /usr/X11R6/lib/libGL.1.dylib


Is there something new on lib GL ??
anyone knows what to do ??

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20050610/809e4731/attachment.htm

[gerard rio]

Yes, I have done this and it works !!

Le 10 juin 05 à 17:06, Miguel A. Pasenau de Riera a écrit :

noted.
the problem seems that in the tiger version of MaxOSX there is no
GLU library. we only have used gid on version 10.2.1,without problems.
we still don't have verified GiD on version 10.4.1. until we can do
it ¿can you try to get this libGLU.dylib from a prior mac osx
version, like 10.3 or 10.2? or get it from apple?

miguel