[GiDlist] Post process tools

[Fernando Salazar]

Good morning, GiD team

I need to do some operations in post process.
Durind the last GiD conference I was told they were available, but I don't
know how to do them:

1.- Take parts of a postprocess mesh to work with it
separately. For example, if I make a cut over a mesh, and then I want to
analyze a part of it for calculating the integral of some of the results.
Is it possible to save a part of a mesh as an independent mesh, and then
open it with GiD and work with it? How?

2.- I know I can convert a
isosurface into a cut, and then into a mesh. Is it possible to use this
isosurface/cut/mesh to cut another (volume) mesh? How?

3.- How can I
import a preprocess mesh to the post process?

Thanks

--
Fernando
Salazar González
Ingeniero de Caminos, Canales y Puertos
Director de
CIMNE-Madrid
Paseo Gral Martínez Campos, 41. 28010 Madrid.

Tel. +34 913
191 359
Móvil. +34 610 234 477
fsalazar at cimne.upc.edu [1]
www.cimne.com
[2]

AVISO IMPORTANTE

Los datos de carácter personal contenidos en el
mensaje, se registrarán enun fichero para facilitar la gestión de las
comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso,
rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras
oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034
Barcelona, España.

AVIS IMPORTANT

Les dades de caràcter personal
contingudes en aquest missatge es registraran en un fitxer per facilitar la
gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés,
rectificació, cancel·lació i oposició, per escrit a les nostres oficines
del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona,
Espanya.

IMPORTANT NOTICE

All personal data contained in this mail will
be processed confidentially andstored in a file property of CIMNE in order
to manage corporate communications. You may exercise the right of access,
rectification, deletion and objection by letter sent to CIMNE, Gran
Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain.



Links:
------
[1] mailto:fsalazar at cimne.upc.edu
[2] http://www.cimne.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100602/b178e76c/attachment.htm

[Andreas Hauck]

Hello,

the link to the GiDpost-library

http://www.gidhome.com/downloads/Other_gid/Tools/gidpost1.70.zip

given on the download page is not working. Browsing the ftp-server, I found the library at

ftp://www.gidhome.com/pub/Old_gid/Tools/gidpost1.70.zip

Do you have any plans to release an updated version or to enhance the library in order to
read in GiD-files as well? This would be a very important feature for us!

Regards,
Andreas Hauck
--

_/ _/_/ _/_/_/ Friedrich Alexander Universitaet Erlangen
_/ _/ _/ _/ Lehrstuhl fuer Sensorik
_/ _/ _/ Paul-Gordan-Str. 3-5, D-91052 Erlangen
_/ _/_/ _/_/_/
_/ _/ _/ Friedrich Alexander University Erlangen
_/ _/ _/ _/ Department of Sensor Technology
_/_/_/ _/_/ _/_/_/ Paul-Gordan-Str. 3-5, D-91052 Erlangen

M.Sc. Andreas Hauck

email.: andreas.hauck at lse.eei.uni-erlangen.de
url. : http://www.lse.uni-erlangen.de
tel. : (+49)-9131-85-23147
fax. : (+49)-9131-85-23133

[escolano]

Hello,

Thanks for the information, now the link of the web is fixed.

About your question, our develop GiDpost library now has a new option, it's
possible to write GiD results using the HDF5 library.
Future GiDs will be able to read this GiD postprocess hdf5 files,
and also third part programs like yours could be able to read this kind of
files, from C/C++/FORTRAN using the HDF5 library, and from Tcl/Tk using the
hdf5 package wrapping this library that we included with GiD 10.

Note: the related 'develop GiDpost library' is not ready to download, the
version that you can download is the 1.70 that not include this hdf5 new
feature.

Regards

Enrique

----- Original Message -----
From: "Andreas Hauck" andreas.hauck at lse.eei.uni-erlangen.de
To: gidlist at gid.cimne.upc.edu
Sent: Monday, June 07, 2010 8:29 AM
Subject: [GiDlist] Broken download link for GiDpost library


Hello,

the link to the GiDpost-library

http://www.gidhome.com/downloads/Other_gid/Tools/gidpost1.70.zip

given on the download page is not working. Browsing the ftp-server, I
found the library at

ftp://www.gidhome.com/pub/Old_gid/Tools/gidpost1.70.zip

Do you have any plans to release an updated version or to enhance the
library in order to
read in GiD-files as well? This would be a very important feature for us!

Regards,
Andreas Hauck
--

_/ _/_/ _/_/_/ Friedrich Alexander Universitaet Erlangen
_/ _/ _/ _/ Lehrstuhl fuer Sensorik
_/ _/ _/ Paul-Gordan-Str. 3-5, D-91052 Erlangen
_/ _/_/ _/_/_/
_/ _/ _/ Friedrich Alexander University Erlangen
_/ _/ _/ _/ Department of Sensor Technology
_/_/_/ _/_/ _/_/_/ Paul-Gordan-Str. 3-5, D-91052 Erlangen

M.Sc. Andreas Hauck

email.: andreas.hauck at lse.eei.uni-erlangen.de
url. : http://www.lse.uni-erlangen.de
tel. : (+49)-9131-85-23147
fax. : (+49)-9131-85-23133
_______________________________________________
GiDlist mailing list
GiDlist at gid.cimne.upc.edu
http://gid.cimne.upc.es/mailman/listinfo/gidlist

[Czaikowski, Oliver]

Ich werde ab 04.06.2010 nicht im Büro sein. Ich kehre zurück am
04.07.2010.

Ich werde Ihre Nachricht nach meiner Rückkehr beantworten.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100607/458bd961/attachment.htm

[miguel]

Hello,

1. There are several options to achieve this:

Top menu bar -- Divide by selection : select the elements you want and create a new mesh with these elements

Top menu bar -- Divide volume sets / surface sets : create a new mesh whose elements are on one side of a plane defined by the user

Top menu bar -- Divide lines : create a new mesh with the edges of the surface elements which lie on one side of a plane defined by the user

To save the meshes: Top menu bar -- File -- Export -- Post information -- ASCII files / Binary ( whole model = mesh + results) / Binary (only results)

Top menu bar -- File -- Export -- Post information -- ASCII boundaries : writes a mesh file only with the boundaries of the meshes

( so for a tetrahedral mesh this option will write the triangles boundaries, for a triangle mesh it will write the lines of the boundaries)



2. To convert an isosurface to a cut-mesh: Top menu bar -- Options -- Iso surfaces -- Convert to cuts

Top convert a cut to a surface mesh: Top menu bar -- Do cuts -- Convert cuts to surface sets

At the moment it is not possible to use one surface set or isosurface to cut another mesh.



3. to import the preprocess mesh into Post:

1. you need to export the preprocess mesh into ascii file

2. then in postprocess read, or merge, the mesh.

But when GiD switches from the preprocess parto to postprocess, the mesh in the preprocess part is also present in the postprocess part.

¿What exactly do you want to do?

Best reagrds,



Miguel Pasenau



De: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] En nombre de Fernando Salazar
Enviado el: miércoles, 02 de junio de 2010 9:11
Para: gidlist at gid.cimne.upc.edu
Asunto: [GiDlist] Post process tools



Good morning, GiD team

I need to do some operations in post process. Durind the last GiD conference I was told they were available, but I don't know how to do them:

1.- Take parts of a postprocess mesh to work with it separately. For example, if I make a cut over a mesh, and then I want to analyze a part of it for calculating the integral of some of the results. Is it possible to save a part of a mesh as an independent mesh, and then open it with GiD and work with it? How?

2.- I know I can convert a isosurface into a cut, and then into a mesh. Is it possible to use this isosurface/cut/mesh to cut another (volume) mesh? How?

3.- How can I import a preprocess mesh to the post process?

Thanks

--

Fernando Salazar González


Ingeniero de Caminos, Canales y Puertos


Director de CIMNE-Madrid


Paseo Gral Martínez Campos, 41. 28010 Madrid.
Tel. +34 913 191 359


Móvil. +34 610 234 477


fsalazar at cimne.upc.edu


www.cimne.com
AVISO IMPORTANTE
Los datos de carácter personal contenidos en el mensaje, se registrarán enun fichero para facilitar la gestión de las comunicaciones de CIMNE. Se pueden ejercitar los derechos de acceso, rectificación, cancelación y oposición por escrito, dirigiéndose a nuestras oficinas de CIMNE, Gran Capitán s/n, Edificio C1 - Campus Norte UPC, 08034 Barcelona, España.
AVIS IMPORTANT
Les dades de caràcter personal contingudes en aquest missatge es registraran en un fitxer per facilitar la gestió de les comunicacions del CIMNE. Es poden exercir els drets d'accés, rectificació, cancel·lació i oposició, per escrit a les nostres oficines del CIMNE, Gran Capità s/n, Edifici C1, Campus Nord UPC, 08034 Barcelona, Espanya.
IMPORTANT NOTICE
All personal data contained in this mail will be processed confidentially andstored in a file property of CIMNE in order to manage corporate communications. You may exercise the right of access, rectification, deletion and objection by letter sent to CIMNE, Gran Capitán, Edificio C1 - Campus Norte UPC, 08034 Barcelona, Spain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100608/82b73caf/attachment.htm