[GiDlist] GiD 9.3.1b x32

[Shriram]

Hey,



I just downloaded the GiD 9.3.1b. Is there a way where I can find "What's
new" for this version? I want to see the changes from GiD 9.2.9b to GiD
9.3.1b. It is not there in the help menu.





Thanks,

Shriram,

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100514/53d03a08/attachment.htm

[escolano]

We updated today the installer of the version 9.3.1b (uploaded last friday) including in the help the news and a list of some fixed bugs of this version.

The version 9.3.1b for Windows x32 had a problem with the command.exe file, and the .win.bat calculation file doesn't run. This problem has been fixed in the today's version. Please, download the setup and install it again. (this problem doesn' happened with the x64 version, but it's recommended to re-download it again to have the news)

Can download betas at: http://www.gidhome.com/download/do07.html

Regards

Enrique Escolano
----- Original Message -----
From: Shriram
To: gidlist at gid.cimne.upc.edu
Sent: Friday, May 14, 2010 6:56 PM
Subject: [GiDlist] GiD 9.3.1b x32


Hey,



I just downloaded the GiD 9.3.1b. Is there a way where I can find "What's new" for this version? I want to see the changes from GiD 9.2.9b to GiD 9.3.1b. It is not there in the help menu.





Thanks,

Shriram,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100517/d74d720e/attachment.htm

[Elisabeth Baden (EAB)]

Hi Beasy support,



I sent a query to you a while ago (see below). Can you estimate when I
can expect an answer to that?



Thank you.



Yours sincerely

Elisabeth Baden



M.Sc.

Engineer

Offshore Wind



D +45 7913 7037

eab at ramboll.com mailto:eab at ramboll.com

________________________________________



Ramboll

Willemoesgade 2

DK-6700 Esbjerg

Denmark

www.ramboll-wind.com http://www.ramboll-wind.com/



From: Elisabeth Baden (EAB)
Sent: 06 May 2010 11:46
To: 'gidlist at gid.cimne.upc.edu'
Subject: BEASY FILE IMPORT



Hi Beasy support,

I am trying to import an .IGS file into GiD but it seems to have
problems with the tubular joints. Can you tell me if there is any
preparation that has to be done to the model in the CAD program (Solid
Works) before importing it? Furthermore, GiD does not seem to be
compatible with newer versions of Parasolid, ACIS and VRML files, at
least it doesn't read them.



The normal render shows the surfaces. I am aware that there are "double"
surfaces as the tubes have been drawn as hollow sections but even when
deleting the internal surfaces, Gid identifies them as "bad surface".



I hope you can help me with this, if you need the IGS file, I would be
happy to send it.

Thank you and kind regards

Elisabeth



Elisabeth Baden

M.Sc. Coastal Engineering

Engineer

Offshore Wind

D +45 7913 7037

eab at ramboll.com mailto:eab at ramboll.com

________________________________________

Ramboll

Willemoesgade 2

DK-6700 Esbjerg

Denmark

www.ramboll-wind.com http://www.ramboll-wind.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100518/7a12926a/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 116741 bytes
Desc: image001.png
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100518/7a12926a/attachment.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 61649 bytes
Desc: image002.png
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100518/7a12926a/attachment-0001.png

[escolano]

Another problem...Hi Elisabeth,

Please, could you send me the IGES model to test it?

And also, if you can, send me the related Parasolid, ACIS and VRML files that GiD doesn't recognize, to handle them with the next GiD betas

Note: could send directly to escolano at cimne.upc.edu to avoid big messages to the othe gidlist users.

Regards

Enrique Escolano
GiD Team

----- Original Message -----
From: Elisabeth Baden (EAB)
To: gidlist at gid.cimne.upc.edu
Sent: Tuesday, May 18, 2010 9:23 AM
Subject: [GiDlist] FW: BEASY FILE IMPORT


Hi Beasy support,



I sent a query to you a while ago (see below). Can you estimate when I can expect an answer to that?



Thank you.



Yours sincerely

Elisabeth Baden



M.Sc.

Engineer

Offshore Wind



D +45 7913 7037

eab at ramboll.com

________________________________________



Ramboll

Willemoesgade 2

DK-6700 Esbjerg

Denmark

www.ramboll-wind.com



From: Elisabeth Baden (EAB)
Sent: 06 May 2010 11:46
To: 'gidlist at gid.cimne.upc.edu'
Subject: BEASY FILE IMPORT



Hi Beasy support,

I am trying to import an .IGS file into GiD but it seems to have problems with the tubular joints. Can you tell me if there is any preparation that has to be done to the model in the CAD program (Solid Works) before importing it? Furthermore, GiD does not seem to be compatible with newer versions of Parasolid, ACIS and VRML files, at least it doesn't read them.



The normal render shows the surfaces. I am aware that there are "double" surfaces as the tubes have been drawn as hollow sections but even when deleting the internal surfaces, Gid identifies them as "bad surface".



I hope you can help me with this, if you need the IGS file, I would be happy to send it.

Thank you and kind regards

Elisabeth



Elisabeth Baden

M.Sc. Coastal Engineering

Engineer

Offshore Wind

D +45 7913 7037

eab at ramboll.com

________________________________________

Ramboll

Willemoesgade 2

DK-6700 Esbjerg

Denmark

www.ramboll-wind.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100518/a0332cca/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 116741 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100518/a0332cca/attachment.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 61649 bytes
Desc: not available
Url : http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100518/a0332cca/attachment-0001.png

[Thanh Chau Dinh]

Dear all,
Is there any limited size of .flavia.res file in GiD?
As I imported a .flavia.res file of about 30Gb I got an error "... unknown
keyword "value" at line 17155320 ...". I do not think the file format is not
correct because I successed with a file of smaller size. I wonder if it is
due to not enough memory ?
Besides ASCII file for .flavia.msh and .flavia.res, are there any other
format file accepted by GiD to reduce the postprocessing files?
Thank you in advance.
Thanh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100521/680bd8ab/attachment.htm

[escolano]

It seems as you said that the problem is the big size of your results file.

A 32 bit process can handle only until 4GB of memory (about 2 or 3GB in practice)
A 64 bit process can in theory handle a lot of memory, but in practice real computers usually don't have more than 4 or 8 GB, then try to load 30 GB is a problem. (if the file format is compressed the data can really need much more space)

The only solution is to avoid to load the whole data simultaneously.!!

We are working for next 10 beta version to load/unload results "on demand" (e.g. not to load realllya result if the user don't try to visualize it, or load only one time step, etc.)

Now what you can do is to reduce the file size: e.g. write separated result files for different results, or not to write too much time steps, ...
----- Original Message -----
From: Thanh Chau Dinh
To: gidlist at gid.cimne.upc.edu
Sent: Friday, May 21, 2010 8:22 AM
Subject: [GiDlist] error as importing postprocessing files


Dear all,
Is there any limited size of .flavia.res file in GiD?
As I imported a .flavia.res file of about 30Gb I got an error "... unknown keyword "value" at line 17155320 ...". I do not think the file format is not correct because I successed with a file of smaller size. I wonder if it is due to not enough memory ?
Besides ASCII file for .flavia.msh and .flavia.res, are there any other format file accepted by GiD to reduce the postprocessing files?
Thank you in advance.
Thanh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100521/08d5d85c/attachment.htm

[miguel]

Hi,

you can also use the gidpost library to write compresed binary files:
http://www.gidhome.com/support_team/gidpost.html



You have also the option of compressing your ascii files (with gzip).



Best regards



Miguel Pasenau



De: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu]
En nombre de Enrique Escolano
Enviado el: viernes, 21 de mayo de 2010 11:08
Para: gidlist at gid.cimne.upc.edu
Asunto: Re: [GiDlist] error as importing postprocessing files



It seems as you said that the problem is the big size of your results file.



A 32 bit process can handle only until 4GB of memory (about 2 or 3GB in
practice)

A 64 bit process can in theory handle a lot of memory, but in practice real
computers usually don't have more than 4 or 8 GB, then try to load 30 GB is
a problem. (if the file format is compressed the data can really need much
more space)



The only solution is to avoid to load the whole data simultaneously.!!



We are working for next 10 beta version to load/unload results "on demand"
(e.g. not to load realllya result if the user don't try to visualize it, or
load only one time step, etc.)



Now what you can do is to reduce the file size: e.g. write separated result
files for different results, or not to write too much time steps, ...

----- Original Message -----

From: Thanh Chau Dinh mailto:chdthanh at gmail.com

To: gidlist at gid.cimne.upc.edu

Sent: Friday, May 21, 2010 8:22 AM

Subject: [GiDlist] error as importing postprocessing files



Dear all,

Is there any limited size of .flavia.res file in GiD?

As I imported a .flavia.res file of about 30Gb I got an error "... unknown
keyword "value" at line 17155320 ...". I do not think the file format is not
correct because I successed with a file of smaller size. I wonder if it is
due to not enough memory ?

Besides ASCII file for .flavia.msh and .flavia.res, are there any other
format file accepted by GiD to reduce the postprocessing files?

Thank you in advance.

Thanh

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100521/a4a5fc46/attachment.htm

[Thanh Chau Dinh]

Hello,
Can I write post files in compressed ascii/binary format like the gidpost
library by myself?
By the way, I can not link the gidpost.lib for running testpostfor.f
example. Can you help me? I am using Intel Fortran 10.0 and VS 2008. In
fact, as I create .gidpost.lib there are some warnnings.
Thank you in advance.
Thanh

On Fri, May 21, 2010 at 7:34 PM, Miguel A. Pasenau de Riera
miguel at cimne.upc.edu wrote:

Hi,

you can also use the gidpost library to write compresed binary files:
http://www.gidhome.com/support_team/gidpost.html



You have also the option of compressing your ascii files (with gzip).



Best regards



Miguel Pasenau



*De:* gidlist-admin at gid.cimne.upc.edu [mailto:
gidlist-admin at gid.cimne.upc.edu] *En nombre de *Enrique Escolano
*Enviado el:* viernes, 21 de mayo de 2010 11:08
*Para:* gidlist at gid.cimne.upc.edu
*Asunto:* Re: [GiDlist] error as importing postprocessing files



It seems as you said that the problem is the big size of your results file.



A 32 bit process can handle only until 4GB of memory (about 2 or 3GB in
practice)

A 64 bit process can in theory handle a lot of memory, but in practice real
computers usually don't have more than 4 or 8 GB, then try to load 30 GB is
a problem. (if the file format is compressed the data can really need much
more space)



The only solution is to avoid to load the whole data simultaneously.!!



We are working for next 10 beta version to load/unload results "on demand"
(e.g. not to load realllya result if the user don't try to visualize it, or
load only one time step, etc.)



Now what you can do is to reduce the file size: e.g. write separated result
files for different results, or not to write too much time steps, ...

----- Original Message -----

*From:* Thanh Chau Dinh chdthanh at gmail.com

*To:* gidlist at gid.cimne.upc.edu

*Sent:* Friday, May 21, 2010 8:22 AM

*Subject:* [GiDlist] error as importing postprocessing files



Dear all,

Is there any limited size of .flavia.res file in GiD?

As I imported a .flavia.res file of about 30Gb I got an error "... unknown
keyword "value" at line 17155320 ...". I do not think the file format is not
correct because I successed with a file of smaller size. I wonder if it is
due to not enough memory ?

Besides ASCII file for .flavia.msh and .flavia.res, are there any other
format file accepted by GiD to reduce the postprocessing files?

Thank you in advance.

Thanh


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100521/ba767e99/attachment.htm

[escolano]

You must use the gidpost to write binary compressed files (it is very difficult to do it by yourself).
It is easier to link the gidpost with your FORTRAN code. We did and it is possible changing some compiler/linker settings, or writting some FORTRAN interface
(I tried sucessfully for example with VS 2005 and Intel FORTRAN 10.1.4159.2005, using the examples\tesfpostfor.f included with our library source)

In any case this format will only reduce the disk space and speed the reading time, but when read in GiD
is is uncompressed in memory and your problem of too big results become the same as with ASCII files!!

Regards

Enrique Escolano
----- Original Message -----
From: Thanh Chau Dinh
To: gidlist at gid.cimne.upc.edu
Sent: Friday, May 21, 2010 3:17 PM
Subject: Re: [GiDlist] error as importing postprocessing files


Hello,
Can I write post files in compressed ascii/binary format like the gidpost library by myself?
By the way, I can not link the gidpost.lib for running testpostfor.f example. Can you help me? I am using Intel Fortran 10.0 and VS 2008. In fact, as I create .gidpost.lib there are some warnnings.
Thank you in advance.
Thanh


On Fri, May 21, 2010 at 7:34 PM, Miguel A. Pasenau de Riera miguel at cimne.upc.edu wrote:

Hi,

you can also use the gidpost library to write compresed binary files: http://www.gidhome.com/support_team/gidpost.html



You have also the option of compressing your ascii files (with gzip).



Best regards



Miguel Pasenau



De: gidlist-admin at gid.cimne.upc.edu [mailto:gidlist-admin at gid.cimne.upc.edu] En nombre de Enrique Escolano
Enviado el: viernes, 21 de mayo de 2010 11:08
Para: gidlist at gid.cimne.upc.edu
Asunto: Re: [GiDlist] error as importing postprocessing files



It seems as you said that the problem is the big size of your results file.



A 32 bit process can handle only until 4GB of memory (about 2 or 3GB in practice)

A 64 bit process can in theory handle a lot of memory, but in practice real computers usually don't have more than 4 or 8 GB, then try to load 30 GB is a problem. (if the file format is compressed the data can really need much more space)



The only solution is to avoid to load the whole data simultaneously.!!



We are working for next 10 beta version to load/unload results "on demand" (e.g. not to load realllya result if the user don't try to visualize it, or load only one time step, etc.)



Now what you can do is to reduce the file size: e.g. write separated result files for different results, or not to write too much time steps, ...

----- Original Message -----

From: Thanh Chau Dinh

To: gidlist at gid.cimne.upc.edu

Sent: Friday, May 21, 2010 8:22 AM

Subject: [GiDlist] error as importing postprocessing files



Dear all,

Is there any limited size of .flavia.res file in GiD?

As I imported a .flavia.res file of about 30Gb I got an error "... unknown keyword "value" at line 17155320 ...". I do not think the file format is not correct because I successed with a file of smaller size. I wonder if it is due to not enough memory ?

Besides ASCII file for .flavia.msh and .flavia.res, are there any other format file accepted by GiD to reduce the postprocessing files?

Thank you in advance.

Thanh


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20100528/2f29911c/attachment.htm