Moderator: CODE_BRIGHT Team
I'm learning shallow basic problems.
On the basis of following the shallow foundation process, I selected CASM-general ITYCL = 1 in materials, and the Pi value is 0.3326; 0.0156; 0.11; e; 1; 1.20; 30.11; 0; 0; 0; In conditions the initial stress is set up with a Y-stress value. The rest is the same as the shallow base set, but it shows after processing: Error "No results found: definitions for 1 gauss points read".
I don't know what's wrong with the model. Thank you very much for your help.