# \[GiDlist\] Post-processing issues when merging 2 meshes

**URL:** <https://forum.gidsimulation.com/t/gidlist-post-processing-issues-when-merging-2-meshes/261>\
**Category:** 2013 - 2005\
**Created:** [January 29, 2013, 5:23pm UTC](https://forum.gidsimulation.com/t/gidlist-post-processing-issues-when-merging-2-meshes/261 "2013-01-29T17:23:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Marco\_Giometto\_GMAIL](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/m/aca169/32.png) [@Marco\_Giometto\_GMAIL](https://forum.gidsimulation.com/u/Marco_Giometto_GMAIL)\
**Post date:** [January 29, 2013, 5:23pm UTC](https://forum.gidsimulation.com/t/gidlist-post-processing-issues-when-merging-2-meshes/261/1 "2013-01-29T17:23:08Z")

</div>

Hello,

I’m importing in post-processing mode a ‘.post.res’ file, where I wrote  
the _cartesian_ mesh datas and results at different time steps (you  
can see a cut of it in blue color in fig2) and a ‘.msh’ file which is  
basically a discretized nurbs surface (_quadrilateral mesh_) through  
which I want to provide a rendering of the topology (lower boundary  
condition for my simulation, the copper colored surface in fig2).

The thing I would like is to have a contour plot on the blue cut and  
leave the copper mesh rendered as it is. Is there a way of doing so? At  
the moment the top I could do is what you see on fig1.

Best regards,  
Marco  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130129/8902ade5/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130129/8902ade5/attachment-0001.htm)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: fig2.png  
Type: image/png  
Size: 18789 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130129/8902ade5/attachment-0002.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130129/8902ade5/attachment-0002.png)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: fig1.png  
Type: image/png  
Size: 74724 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130129/8902ade5/attachment-0003.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130129/8902ade5/attachment-0003.png)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [January 30, 2013, 9:04am UTC](https://forum.gidsimulation.com/t/gidlist-post-processing-issues-when-merging-2-meshes/261/2 "2013-01-30T09:04:00Z")

</div>

If do you have the geometric model in preprocess then you can show it, for visualization pourpose, also in postprocess (then is not necessary to create your 'discretized NURBS surface, you can hide it)

To show also the preprocess model in post, go to : Window-View style…  
and set: Draw model: Geometry, and Model render (of preprocess) to Flat. (and can open the preprocess ‘Layers window’ to set on/off or transparency of each layer)

Enrique Escolano  
----- Original Message -----  
From: Marco Giometto | GMAIL  
To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Tuesday, January 29, 2013 6:23 PM  
Subject: [GiDlist] Post-processing issues when merging 2 meshes  
  
  
Hello,

I’m importing in post-processing mode a ‘.post.res’ file, where I wrote the cartesian mesh datas and results at different time steps (you can see a cut of it in blue color in fig2) and a ‘.msh’ file which is basically a discretized nurbs surface (quadrilateral mesh) through which I want to provide a rendering of the topology (lower boundary condition for my simulation, the copper colored surface in fig2).

The thing I would like is to have a contour plot on the blue cut and leave the copper mesh rendered as it is. Is there a way of doing so? At the moment the top I could do is what you see on fig1.

## Best regards, Marco \

\

* * *

GiDlist mailing list  
[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130130/b4a85b02/attachment.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20130130/b4a85b02/attachment.htm)
