# \[GiDlist\] (no subject)

**URL:** <https://forum.gidsimulation.com/t/gidlist-no-subject/1547>\
**Category:** 2002 - 2000\
**Created:** [December 22, 2002, 11:33am UTC](https://forum.gidsimulation.com/t/gidlist-no-subject/1547 "2002-12-22T11:33:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![tarzan\_delasmonas](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/t/e36b37/32.png) [@tarzan\_delasmonas](https://forum.gidsimulation.com/u/tarzan_delasmonas)\
**Post date:** [December 22, 2002, 11:33am UTC](https://forum.gidsimulation.com/t/gidlist-no-subject/1547/1 "2002-12-22T11:33:01Z")

</div>

hi i´m spanish student who need to use the gid for a project.  
can anyone tell me all the steps to accomplished the creation of the  
.sim file, and how can i linked to the .geo that it makes reference to?  
this was what i wrote

.sim file

cond DESLIZADERA  
1  
global  
cond(int,1)  
1  
0  
0  
proyecto.geo

.cnd file

NUMBER: 1 CONDITION: DESLIZADERA  
CONDTYPE: over points  
CONDMESHTYPE: over nodes  
QUESTION: DESPLAZAMIENTO\_Y  
VALUE: 1  
END CONDITION

my problem type name is proyecto.gid, when i´ve the .geo with the .cnd  
.prb .mat and .sim in the problem type folder, i can´t load the problem  
type the message is that it doesn´t exist such a problem type,  
and when the .geo isn´t in the folder, when loading the problem type, it  
says that there is an error in line 8 of the .sim file, that which  
refers to the .geo file proyecto  
thanks  
  
  
  
—Publicidad--------------------------------------------------------  
Juega con Ventura24.es, lotería inteligente y multiplica tus  
posibilidades!! [Última información publicada - iespaña](http://www.iespana.es/_reloc/email.ventura)

---

<div class="post-metadata">

**Author:** ![Enrique\_Escolano](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/e/ecd19e/32.png) [@Enrique\_Escolano](https://forum.gidsimulation.com/u/Enrique_Escolano)\
**Post date:** [December 23, 2002, 10:15am UTC](https://forum.gidsimulation.com/t/gidlist-no-subject/1547/2 "2002-12-23T10:15:02Z")

</div>

Not use the same name as the problem type (in your case ‘proyecto’) for the  
.geo symbol file,  
because it creates a confusion between a model and a problem type.  
Use for example another name as “deslizadera.geo”.

Enrique Escolano

----- Original Message -----  
From: “tarzan delasmonas” [tarzandelasmonas at iespana.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
To: [GiDlist at gatxan.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)&gt [tarzandelasmonas at iespana.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Sunday, December 22, 2002 12:32 PM  
Subject: [GiDlist] (no subject)  
  
  
_hi i´m spanish student who need to use the gid for a project._  
_can anyone tell me all the steps to accomplished the creation of the_  
_.sim file, and how can i linked to the .geo that it makes reference to?_  
_this was what i wrote_  
_.sim file_  
_cond DESLIZADERA_  
_1_  
_global_  
_cond(int,1)_  
_1_  
_0_  
_0_  
_proyecto.geo_  
_.cnd file_  
_NUMBER: 1 CONDITION: DESLIZADERA_  
_CONDTYPE: over points_  
_CONDMESHTYPE: over nodes_  
_QUESTION: DESPLAZAMIENTO\_Y_  
_VALUE: 1_  
_END CONDITION_  
_my problem type name is proyecto.gid, when i´ve the .geo with the .cnd_  
_.prb .mat and .sim in the problem type folder, i can´t load the problem_  
_type the message is that it doesn´t exist such a problem type,_  
_and when the .geo isn´t in the folder, when loading the problem type, it_  
_says that there is an error in line 8 of the .sim file, that which_  
_refers to the .geo file proyecto_  
_thanks_  
  
  
_—Publicidad--------------------------------------------------------_  
_Juega con Ventura24.es, lotería inteligente y multiplica tus_  
\_posibilidades!! [Última información publicada - iespaña](http://www.iespana.es/_reloc/email.ventura_)

* * *

_GiDlist mailing list_  
_[GiDlist at gid.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://gid.cimne.upc.es/mailman/listinfo/gidlist\_](http://gid.cimne.upc.es/mailman/listinfo/gidlist_)

---

<div class="post-metadata">

**Author:** ![Pablo\_Perez\_del\_Cast](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/p/ea666f/32.png) [@Pablo\_Perez\_del\_Cast](https://forum.gidsimulation.com/u/Pablo_Perez_del_Cast)\
**Post date:** [December 30, 2002, 6:01pm UTC](https://forum.gidsimulation.com/t/gidlist-no-subject/1547/3 "2002-12-30T18:01:01Z")

</div>

Hello;  
I would like to use RamDebugger with GID under windows, so i have to modify  
a file Tcl-opengl (help ramdebugger), and load comm, but i have not idea how  
i do it. Can you help me??, i have to do with remote mode, i have to open  
gid??.  
A lot of thanks.  
Pablo

---

<div class="post-metadata">

**Author:** ![Ramon\_Rib\_oacute](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/r/8797f3/32.png) [@Ramon\_Rib\_oacute](https://forum.gidsimulation.com/u/Ramon_Rib_oacute)\
**Post date:** [December 30, 2002, 10:05pm UTC](https://forum.gidsimulation.com/t/gidlist-no-subject/1547/4 "2002-12-30T22:05:03Z")

</div>

Hello,

To use RamDebugger with GiD, do the following:

-Install RamDebugger  
-Open with an editor file ‘tclfile-opengl’ located  
in directory ‘scripts’ inside GiD distribution

- Add the following lines near the end of the file:  
lappend auto\_path {C:\TclTk\RamDebugger\addons}  
package require commR  
comm::register gid 1

Note1: near the end of the file, means before the last line  
with command ‘return’  
Note2: substitute: C:\TclTk\RamDebugger\addons for the place  
where you have installed RamDebugger

Once everything is done, if GiD is open and you open  
RamDebugger, GiD should appear in the ‘File-Debug on’ menu

Best regards and happy new year,

–  
Compass Ing. y Sistemas Dr. Ramon Ribó  
[http://www.compassis.com](http://www.compassis.com)[ramsan at compassis.com](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82  
08034 Barcelona, Spain fax. +34 93 204 19 09

-----Mensaje original-----  
De: [gidlist-admin at gatxan.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[mailto:[gidlist-admin at gatxan.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)]En nombre de Pablo Perez del  
Castillo  
Enviado el: martes, 31 de diciembre de 2002 1:55  
Para: [gidlist at gatxan.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Asunto: [GiDlist] use RamDebugger  
Importancia: Alta  
  
  
Hello;  
I would like to use RamDebugger with GID under windows, so i have to modify  
a file Tcl-opengl (help ramdebugger), and load comm, but i have not idea how  
i do it. Can you help me??, i have to do with remote mode, i have to open  
gid??.  
A lot of thanks.  
Pablo

* * *

GiDlist mailing list  
[GiDlist at gid.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://gid.cimne.upc.es/mailman/listinfo/gidlist](http://gid.cimne.upc.es/mailman/listinfo/gidlist)
