# \[GiDlist\] GID question

**URL:** <https://forum.gidsimulation.com/t/gidlist-gid-question/87>\
**Category:** 2013 - 2005\
**Created:** [November 13, 2012, 3:52pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87 "2012-11-13T15:52:56Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![Michal\_Petas](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/m/eb8c5e/32.png) [@Michal\_Petas](https://forum.gidsimulation.com/u/Michal_Petas)\
**Post date:** [November 13, 2012, 3:52pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/1 "2012-11-13T15:52:56Z")

</div>

Hi,  
  
  
  
How to get values in \*.bas file from this kind of field:

QUESTION: field\_name:(…,optional\_value\_i,…)

VALUE: #N# number\_of\_values … value\_number … ?  
  
  
  
Can you send me example ?  
  
  
  
I created this control in material module as:  
  
  
  
QUESTION: Discrete\_points(Espilon,Sigma)

VALUE: #N# 2 0.0 000  
  
  
  
I tried get value from 1th column like below:  
  
  
  
\*MatProp(Discrete\_points) - this work, but it return number of matrix  
elements (not all matrix)  
  
  
  
\*MatProp(Discrete\_points(0)) or \*MatProp(Discrete\_points(Espilon)) not  
work.  
  
  
  
Regards

Michał Petaś

-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121113/10a10e6b/attachment.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121113/10a10e6b/attachment.htm)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [November 13, 2012, 7:15pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/2 "2012-11-13T19:15:32Z")

</div>

You can write the values by rows for example with this code (with the index after a comma):

\*for(i=1;i=N;i=i+2)  
\*Matprop(Discrete\_points,\*i) \*Matprop(Discrete\_points,\*operation(i+1))  
\*end for

We added more information and an example to the ‘customization manual’ for next beta versions.

Enrique Escolano  
----- Original Message -----  
From: Michal Petas  
To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Tuesday, November 13, 2012 4:52 PM  
Subject: [GiDlist] GID question  
  
  
Hi,  
  
  
  
How to get values in \*.bas file from this kind of field:

QUESTION: field\_name:(…,optional\_value\_i,…)

VALUE: #N# number\_of\_values … value\_number … ?  
  
  
  
Can you send me example ?  
  
  
  
I created this control in material module as:  
  
  
  
QUESTION: Discrete\_points(Espilon,Sigma)

VALUE: #N# 2 0.0 000  
  
  
  
I tried get value from 1th column like below:  
  
  
  
\*MatProp(Discrete\_points) - this work, but it return number of matrix elements (not all matrix)  
  
  
  
\*MatProp(Discrete\_points(0)) or \*MatProp(Discrete\_points(Espilon)) not work.  
  
  
  
Regards

## Michał Petaś \

\

* * *

GiDlist mailing list  
[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121113/3a383d9a/attachment.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121113/3a383d9a/attachment.htm)

---

<div class="post-metadata">

**Author:** ![Michal\_Petas](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/m/eb8c5e/32.png) [@Michal\_Petas](https://forum.gidsimulation.com/u/Michal_Petas)\
**Post date:** [November 14, 2012, 8:49am UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/3 "2012-11-14T08:49:46Z")

</div>

Thank you very much.  
  
  
  
Michał Petaś  
  
  
  
From: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[mailto:[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] On Behalf Of Enrique Escolano  
Sent: Tuesday, November 13, 2012 8:16 PM  
To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Subject: Re: [GiDlist] GID question  
  
  
  
You can write the values by rows for example with this code (with the index  
after a comma):  
  
  
  
\*for(i=1;i=N;i=i+2)  
\*Matprop(Discrete\_points,\*i) \*Matprop(Discrete\_points,\*operation(i+1))

\*end for  
  
  
  
We added more information and an example to the ‘customization manual’ for  
next beta versions.  
  
  
  
Enrique Escolano

----- Original Message -----

From: Michal Petas mailto:[mpetas at ippt.gov.pl](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)

To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)

Sent: Tuesday, November 13, 2012 4:52 PM

Subject: [GiDlist] GID question  
  
  
  
Hi,  
  
  
  
How to get values in \*.bas file from this kind of field:

QUESTION: field\_name:(…,optional\_value\_i,…)

VALUE: #N# number\_of\_values … value\_number … ?  
  
  
  
Can you send me example ?  
  
  
  
I created this control in material module as:  
  
  
  
QUESTION: Discrete\_points(Espilon,Sigma)

VALUE: #N# 2 0.0 000  
  
  
  
I tried get value from 1th column like below:  
  
  
  
\*MatProp(Discrete\_points) - this work, but it return number of matrix  
elements (not all matrix)  
  
  
  
\*MatProp(Discrete\_points(0)) or \*MatProp(Discrete\_points(Espilon)) not  
work.  
  
  
  
Regards

Michał Petaś  
  
\

* * *

\

* * *

GiDlist mailing list  
mailto:[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)

-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121114/5ca5ef5e/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121114/5ca5ef5e/attachment-0001.htm)

---

<div class="post-metadata">

**Author:** ![rachel\_gelet](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/r/ce73a5/32.png) [@rachel\_gelet](https://forum.gidsimulation.com/u/rachel_gelet)\
**Post date:** [November 26, 2012, 5:58am UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/4 "2012-11-26T05:58:49Z")

</div>

Dear Gid-users,

I am new to GID, so I apologies if this question is not an appropriate one.

I am interested to use GID as a post-processor to plot figures and videos.  
So far I am using a Tecplot ASCII file that I import using  
“Files-import-TECPLOT ASCII file”, after having hit the toggle between  
pre and post-process.  
A small example of the kind of file I use is attached.

Context:  
I use to plot figures and videos with Matlab.  
Because this process was very much time consuming (especially for videos  
and large number of particles) I am keen to switch to GID.  
Now I fear that the problem may come from the format of the file I am using  
(ASCII) rather than the software.

Question:  
Is there any format (VTK + binary?) that I can use to print my data that  
will ensure me the best post-process performanace in GID?

Thank you for your time in answering my question.

Cheers,

Rachel.  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121126/3a50518f/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121126/3a50518f/attachment-0001.htm)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: cg30\_coarse1.plt  
Type: application/octet-stream  
Size: 2591604 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121126/3a50518f/attachment-0001.obj](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121126/3a50518f/attachment-0001.obj)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [November 26, 2012, 3:00pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/5 "2012-11-26T15:00:46Z")

</div>

Hi Rachel,

What is the problem using TECPLOT ASCII files with GiD? Probably will be much faster than using Matlab not?  
It is possible to import also VTK result files,as you pointed (Files-Import-Vtk…) (In postprocess of GiD, not in preprocess Files-Import-Vtk voxels!!)  
but I am not sure if it will be faster than using TECPLOT ASCII format.

You can also directly write our ‘GiD postprocess’ format, using our ‘gidpost library’, linked in your C/C++ or FORTRAN program ([http://www.gidhome.com/gid-plus/tools/gidpost](http://www.gidhome.com/gid-plus/tools/gidpost))  
these files will be smaller written in compressed binary format, and faster to be read (and GiD results cache could be activated to read huge result files without store the whole file in memory)

Note: set this settings, if possible, for the best graphical GiD performance:  
Utilities-Preferences… - Graphical  
“Fast visualization mode”  
Unset “Selection lines by software”  
and set drawing method to “Vertex buffer objects”  
Set also “use textures for contour fills”

Enrique Escolano

----- Original Message -----  
From: rachel gelet  
To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Monday, November 26, 2012 6:58 AM  
Subject: [GiDlist] format question to plot data (post-process)  
  
  
Dear Gid-users,

I am new to GID, so I apologies if this question is not an appropriate one.

I am interested to use GID as a post-processor to plot figures and videos.  
So far I am using a Tecplot ASCII file that I import using “Files-import-TECPLOT ASCII file”, after having hit the toggle between pre and post-process.  
A small example of the kind of file I use is attached.

Context:  
I use to plot figures and videos with Matlab.  
Because this process was very much time consuming (especially for videos and large number of particles) I am keen to switch to GID.  
Now I fear that the problem may come from the format of the file I am using (ASCII) rather than the software.

Question:  
Is there any format (VTK + binary?) that I can use to print my data that will ensure me the best post-process performanace in GID?

Thank you for your time in answering my question.

Cheers,

## Rachel. \

\

* * *

GiDlist mailing list  
[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121126/103b7918/attachment.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121126/103b7918/attachment.htm)

---

<div class="post-metadata">

**Author:** ![Nunzio\_Losacco](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/n/d26b3c/32.png) [@Nunzio\_Losacco](https://forum.gidsimulation.com/u/Nunzio_Losacco)\
**Post date:** [December 3, 2012, 2:07pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/6 "2012-12-03T14:07:43Z")

</div>

Hi all,

the software I’m working with uses 6 noded triangular elements with an odd  
number of integration points (i.e. either 4 or 6). GiD seems not to be able  
to take this into account; is there a way to teach GiD to consider that  
number of gauss points with their position?

Regards,

N.  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121203/fc5d9071/attachment.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121203/fc5d9071/attachment.htm)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [December 3, 2012, 2:32pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/7 "2012-12-03T14:32:36Z")

</div>

6-nodes quadratic triangles are useful in GiD, and for this element our default number of gauss point is also 6 (then we can extrapolate results from gauss points to nodes using the element shape funcions, solving a 6x6 linear equation system)

For other number of gauss points, e.g. 4 we can’t extrapolate results to nodes, and some features become unavailable, and we represent the results as spheres located on the described gauss points location.  
  
  
See GiD help on GiD Customization-POSTPROCESS DATA FILES-Postprocess results format: ProjectName.post.res-Gauss Points  
to know how are defined our ‘internal’ gauss points. If your solver uses a different location, you must describe it in the definition of gauss points of your results file.

Although your solver uses other gauss points, for results visualization pourposes you can write the results file using our internal definition, or also using a different number of gauss points, or better avoiding gauss points results and writting the resuls as nodal ones (averaging the nodal result to have a continuous field)  
  
  
Enrique Escolano  
  
  
----- Original Message -----  
From: Nunzio Losacco  
To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Monday, December 03, 2012 3:07 PM  
Subject: [GiDlist] non-standard number of gauss points  
  
  
Hi all,

the software I’m working with uses 6 noded triangular elements with an odd number of integration points (i.e. either 4 or 6). GiD seems not to be able to take this into account; is there a way to teach GiD to consider that number of gauss points with their position?

Regards,

## N. \

\

* * *

GiDlist mailing list  
[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121203/d9936429/attachment.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121203/d9936429/attachment.htm)

---

<div class="post-metadata">

**Author:** ![Nunzio\_Losacco](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/n/d26b3c/32.png) [@Nunzio\_Losacco](https://forum.gidsimulation.com/u/Nunzio_Losacco)\
**Post date:** [December 6, 2012, 12:01pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/8 "2012-12-06T12:01:41Z")

</div>

Hi Enrique,

thanks for your reply.  
I’m not sure I understood well. If I have results at, say, 7 or 4 gauss  
points, will I be able, following directions of the Customization manual,  
to visualize results as continuous fields over elements (or over the whole  
domain using the “smooth” results option)?

Thanks again,

N.  
Il giorno 03/dic/2012 15:34, “Enrique Escolano” [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) ha  
scritto:

_\*\*_  
_6-nodes quadratic triangles are useful in GiD, and for this element our_  
_default number of gauss point is also 6 (then we can extrapolate_  
_results from gauss points to nodes using the element shape funcions,_  
_solving a 6x6 linear equation system)_  
_For other number of gauss points, e.g. 4 we can’t extrapolate results to_  
_nodes, and some features become unavailable, and we represent the results_  
_as spheres located on the described gauss points location._

_See GiD help on GiD Customization-POSTPROCESS DATA FILES-Postprocess_  
_results format: ProjectName.post.res-Gauss Points_  
_to know how are defined our ‘internal’ gauss points. If your solver uses a_  
_different location, you must describe it in the definition of gauss points_  
_of your results file._  
_Although your solver uses other gauss points, for results visualization_  
_pourposes you can write the results file using our internal definition, or_  
_also using a different number of gauss points, or better avoiding gauss_  
_points results and writting the resuls as nodal ones (averaging the nodal_  
_result to have a continuous field)_

_Enrique Escolano_

_----- Original Message -----_  
_From: Nunzio Losacco [nunzio.losacco at gmail.com](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_Sent: Monday, December 03, 2012 3:07 PM_  
_Subject: [GiDlist] non-standard number of gauss points_  
_Hi all,_  
_the software I’m working with uses 6 noded triangular elements with an odd_  
_number of integration points (i.e. either 4 or 6). GiD seems not to be able_  
_to take this into account; is there a way to teach GiD to consider that_  
_number of gauss points with their position?_  
_Regards,_  
_N._  
_------------------------------_

* * *

_GiDlist mailing list_  
_[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist\_](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_)

* * *

_GiDlist mailing list_  
_[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist\_](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_)

-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121206/db14db4d/attachment.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121206/db14db4d/attachment.htm)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [December 7, 2012, 11:01am UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/9 "2012-12-07T11:01:27Z")

</div>

No, with 7 or 4 gauss points on a guadratic (6 nodes) triangle, you will see the result as ‘coloured spheres’ on your gauss point locations,  
and some options, like smooth contour fill won’t be available, because there is not implemented the extrapolation from results on your gauss points to the element nodes.  
We usually use the ‘shape functions’ of the element to do this extrapolation to nodes: this require the same amount of nodes that gauss points (to have the same number of equations that unknowns).  
Also the trivial case of 1 gauss point is implemented, then the constant result is extrapolated to nodes without need to solve any linear system equations.  
We have not implemented a more general extrapolation mode, for a generic amount of gauss points in arbitrary locations.

But as I’ve explained, you can do you own extrapolation from your calculated gauss points, to our ‘internal’ gauss points (6 gauss points for the quatratic triangle), or better write as a ‘nodal result’ instead of a elemental gauss-point result, averaging as you want the results on nodes belonging to several triangles.

Enrique  
----- Original Message -----  
From: Nunzio Losacco  
To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Thursday, December 06, 2012 1:01 PM  
Subject: Re: [GiDlist] non-standard number of gauss points  
  
  
Hi Enrique,

thanks for your reply.  
I’m not sure I understood well. If I have results at, say, 7 or 4 gauss points, will I be able, following directions of the Customization manual, to visualize results as continuous fields over elements (or over the whole domain using the “smooth” results option)?

Thanks again,

N.

Il giorno 03/dic/2012 15:34, “Enrique Escolano” [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) ha scritto:

6-nodes quadratic triangles are useful in GiD, and for this element our default number of gauss point is also 6 (then we can extrapolate results from gauss points to nodes using the element shape funcions, solving a 6x6 linear equation system)

For other number of gauss points, e.g. 4 we can’t extrapolate results to nodes, and some features become unavailable, and we represent the results as spheres located on the described gauss points location.  
  
  
See GiD help on GiD Customization-POSTPROCESS DATA FILES-Postprocess results format: ProjectName.post.res-Gauss Points  
to know how are defined our ‘internal’ gauss points. If your solver uses a different location, you must describe it in the definition of gauss points of your results file.

Although your solver uses other gauss points, for results visualization pourposes you can write the results file using our internal definition, or also using a different number of gauss points, or better avoiding gauss points results and writting the resuls as nodal ones (averaging the nodal result to have a continuous field)  
  
  
Enrique Escolano  
  
  
----- Original Message -----  
From: Nunzio Losacco  
To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Monday, December 03, 2012 3:07 PM  
Subject: [GiDlist] non-standard number of gauss points  
  
  
Hi all,

the software I’m working with uses 6 noded triangular elements with an odd number of integration points (i.e. either 4 or 6). GiD seems not to be able to take this into account; is there a way to teach GiD to consider that number of gauss points with their position?

Regards,

## N. \

\

* * *

GiDlist mailing list  
[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
  
  
\

* * *

## GiDlist mailing list [GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) \

\

* * *

GiDlist mailing list  
[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121207/2c7e31ab/attachment.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20121207/2c7e31ab/attachment.htm)

---

<div class="post-metadata">

**Author:** ![Eric\_TONICELLO](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/e/7993a0/32.png) [@Eric\_TONICELLO](https://forum.gidsimulation.com/u/Eric_TONICELLO)\
**Post date:** [December 3, 2012, 2:11pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/10 "2012-12-03T14:11:55Z")

</div>

Bonjour,

Je suis en déplacement, retour le lundi 3 décembre. Vos emails seront lus dans la mesure du possible.

En cas d’urgence, adressez votre message ici : [info at mp-ingenieurs.ch](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)

Eric Tonicello

=======================

Hi !

I’m out of office and I’ll be back on Monday December 3rd.

Emails will possibly be read during this period.

In case of urgent matter, please send your message here : [info at mp-ingenieurs.ch](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)

Eric Tonicello

---

<div class="post-metadata">

**Author:** ![Emad\_JAHANGIR](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/e/a587f6/32.png) [@Emad\_JAHANGIR](https://forum.gidsimulation.com/u/Emad_JAHANGIR)\
**Post date:** [December 13, 2012, 9:23am UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/11 "2012-12-13T09:23:20Z")

</div>

Hello everybody,

I use GID 10 to simulate soil-structure interaction for pile foundations. I would like to know if is possible to add a contact element in order to consider the soil-pile interface behavior (e.x with shear parameters).

Thank you  
Emad

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [December 13, 2012, 11:01am UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/12 "2012-12-13T11:01:36Z")

</div>

Dear Emad,

What is the analysis code that you will use to calculate this soil-structure  
case?  
How are ‘contact elements’ for this code?  
e.g.  
a) some solvers requiere to define a master and a slave surface mesh, but  
the elements of both surfaces are not ‘one-to-one’ related  
b) other programs require a one-to-one relationship between the nodes of the  
master and slave parts, and a link between them to know how are related.

If your program is of type a) the usual way is to define in the problemtype  
a GiD condition to handle this information, and mark parts as master and  
slave, and the simulation data (like shear parameters)

If your program is of type b) you need to force this special one-to-one  
mesh, then you can use the ‘special pseudo-geometric entity: contact’ (menu:  
Geomtry-Create-Contact)  
(contact volume for 3D cases). Two master-slave ‘equal surfaces’ must be  
selected, and a kind of semi-structured mesh will be created, having  
one-to-one nodes.  
The shear parameters could be assigned to this ‘special contact volume’ with  
an additional condition aplied over these volumes.

Enrique Escolano

----- Original Message -----  
From: “Emad JAHANGIR” [emad.jahangir at ensg.inpl-nancy.fr](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Thursday, December 13, 2012 10:23 AM  
Subject: [GiDlist] contact element  
  
  
_Hello everybody,_  
_I use GID 10 to simulate soil-structure interaction for pile foundations._  
_I would like to know if is possible to add a contact element in order to_  
_consider the soil-pile interface behavior (e.x with shear parameters)._  
_Thank you_  
_Emad_

* * *

_GiDlist mailing list_  
_[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist\_](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_)

---

<div class="post-metadata">

**Author:** ![Emad\_JAHANGIR](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/e/a587f6/32.png) [@Emad\_JAHANGIR](https://forum.gidsimulation.com/u/Emad_JAHANGIR)\
**Post date:** [December 13, 2012, 3:43pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/13 "2012-12-13T15:43:51Z")

</div>

Thanks Dear Enrique,

The analysis code that I use is Code\_Bright and I don’t know which kind of relationship exists between the nodes of the master and slave parts. Do you have more information about the contact analysis in this code?  
Best regards  
  
  
----- Mail original -----  
_Dear Emad,_  
_What is the analysis code that you will use to calculate this_  
_soil-structure_  
_case?_  
_How are ‘contact elements’ for this code?_  
_e.g._  
_a) some solvers requiere to define a master and a slave surface mesh,_  
_but_  
_the elements of both surfaces are not ‘one-to-one’ related_  
_b) other programs require a one-to-one relationship between the nodes_  
_of the_  
_master and slave parts, and a link between them to know how are_  
_related._  
_If your program is of type a) the usual way is to define in the_  
_problemtype_  
_a GiD condition to handle this information, and mark parts as master_  
_and_  
_slave, and the simulation data (like shear parameters)_  
_If your program is of type b) you need to force this special_  
_one-to-one_  
_mesh, then you can use the ‘special pseudo-geometric entity: contact’_  
_(menu:_  
_Geomtry-Create-Contact)_  
_(contact volume for 3D cases). Two master-slave ‘equal surfaces’ must_  
_be_  
_selected, and a kind of semi-structured mesh will be created, having_  
_one-to-one nodes._  
_The shear parameters could be assigned to this 'special contact_  
_volume’ with_  
_an additional condition aplied over these volumes._  
_Enrique Escolano_  
_----- Original Message -----_  
_From: “Emad JAHANGIR” [emad.jahangir at ensg.inpl-nancy.fr](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_Sent: Thursday, December 13, 2012 10:23 AM_  
_Subject: [GiDlist] contact element_

_Hello everybody,_  
_I use GID 10 to simulate soil-structure interaction for pile_  
_foundations._  
_I would like to know if is possible to add a contact element in_  
_order to_  
_consider the soil-pile interface behavior (e.x with shear_  
_parameters)._  
_Thank you_  
_Emad_

* * *

_GiDlist mailing list_  
_[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist\_](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_)

* * *

_GiDlist mailing list_  
_[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist\_](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [December 13, 2012, 4:06pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/14 "2012-12-13T16:06:43Z")

</div>

I am not a Code\_Bright user,  
ask its developers to know if this program support contacts  
[http://www.etcg.upc.edu/recerca/webs/code\_bright/v3?set\_language=ca](http://www.etcg.upc.edu/recerca/webs/code_bright/v3?set_language=ca)  
and how must be defined in the interface from the user point of view.

Regards

Enrique

----- Original Message -----  
From: “Emad JAHANGIR” [emad.jahangir at ensg.inpl-nancy.fr](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Thursday, December 13, 2012 4:43 PM  
Subject: Re: [GiDlist] contact element  
  
  
  
_Thanks Dear Enrique,_  
_The analysis code that I use is Code\_Bright and I don’t know which kind of_  
_relationship exists between the nodes of the master and slave parts. Do_  
_you have more information about the contact analysis in this code?_  
_Best regards_

_----- Mail original -----_  
_Dear Emad,_  
_What is the analysis code that you will use to calculate this_  
_soil-structure_  
_case?_  
_How are ‘contact elements’ for this code?_  
_e.g._  
_a) some solvers requiere to define a master and a slave surface mesh,_  
_but_  
_the elements of both surfaces are not ‘one-to-one’ related_  
_b) other programs require a one-to-one relationship between the nodes_  
_of the_  
_master and slave parts, and a link between them to know how are_  
_related._  
_If your program is of type a) the usual way is to define in the_  
_problemtype_  
_a GiD condition to handle this information, and mark parts as master_  
_and_  
_slave, and the simulation data (like shear parameters)_  
_If your program is of type b) you need to force this special_  
_one-to-one_  
_mesh, then you can use the ‘special pseudo-geometric entity: contact’_  
_(menu:_  
_Geomtry-Create-Contact)_  
_(contact volume for 3D cases). Two master-slave ‘equal surfaces’ must_  
_be_  
_selected, and a kind of semi-structured mesh will be created, having_  
_one-to-one nodes._  
_The shear parameters could be assigned to this 'special contact_  
_volume’ with_  
_an additional condition aplied over these volumes._  
_Enrique Escolano_  
_----- Original Message -----_  
_From: “Emad JAHANGIR” [emad.jahangir at ensg.inpl-nancy.fr](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_To: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_Sent: Thursday, December 13, 2012 10:23 AM_  
_Subject: [GiDlist] contact element_

_Hello everybody,_  
_I use GID 10 to simulate soil-structure interaction for pile_  
_foundations._  
_I would like to know if is possible to add a contact element in_  
_order to_  
_consider the soil-pile interface behavior (e.x with shear_  
_parameters)._  
_Thank you_  
_Emad_

* * *

_GiDlist mailing list_  
_[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist\_](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_)

* * *

_GiDlist mailing list_  
_[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist\_](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_)

* * *

_GiDlist mailing list_  
_[GiDlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist\_](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist_)

---

<div class="post-metadata">

**Author:** ![saeid](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/s/9de0a6/32.png) [@saeid](https://forum.gidsimulation.com/u/saeid)\
**Post date:** [December 26, 2016, 7:41pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/15 "2016-12-26T19:41:43Z")

</div>

hi every body  
i cant speak english very good  
any of u can help me to design the soil-structure interaction in GID and analize with GID+opeensees  
answere me as soon as u can  
tnx

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [December 29, 2016, 6:06pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/16 "2016-12-29T18:06:54Z")

</div>

There is a new GiD-OpenSees interface at [http://gidopensees.rclab.civil.auth.gr](http://gidopensees.rclab.civil.auth.gr)  
All the currently available information is in this web.

---

<div class="post-metadata">

**Author:** ![vpapanik](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/vpapanik/32/15_2.png) [@vpapanik](https://forum.gidsimulation.com/u/vpapanik)\
**Post date:** [May 7, 2017, 12:44pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-question/87/17 "2017-05-07T12:44:47Z")

</div>

Check for the major v2.0.0 update on 8 May 2017.

> **[hosted.auth | Υπηρεσία Φιλοξενίας Ιστοχώρων ΑΠΘ](http://gidopensees.rclab.civil.auth.gr)**
