# \[GiDlist\] GiD 11 issues

**URL:** <https://forum.gidsimulation.com/t/gidlist-gid-11-issues/304>\
**Category:** 2013 - 2005\
**Created:** [October 14, 2013, 1:34pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-11-issues/304 "2013-10-14T13:34:24Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lu\_iacute\_s\_Mendes](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/l/ce73a5/32.png) [@Lu\_iacute\_s\_Mendes](https://forum.gidsimulation.com/u/Lu_iacute_s_Mendes)\
**Post date:** [October 14, 2013, 1:34pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-11-issues/304/1 "2013-10-14T13:34:24Z")

</div>

Dear all,

We have just bought a local license for GiD 11 and after installing it  
and activating the permanent version, the program presents the following  
issues:

1. A “could not connect to server” warning appears in the textbox below.  
It seems that GiD is pinging a central machine. Windows firewall was set  
to allow all inbound and outbound communication for the Gid executable
2. When accessing the program “Preferences” the “General” does not work  
and error windows are generated.

For further information check the image attached.

In the current state, the software seems to be unusable. Please advice  
on how to correct these issues.

Best regards,

* * *

Luís Mendes

-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: GiD.jpg  
Type: image/jpeg  
Size: 215578 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131014/fa515b6c/attachment-0001.jpg](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131014/fa515b6c/attachment-0001.jpg)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [October 15, 2013, 11:07am UTC](https://forum.gidsimulation.com/t/gidlist-gid-11-issues/304/2 "2013-10-15T11:07:22Z")

</div>

Dear Luís,

I think that the error is not related to the licence. Your licence is local  
and then GiD must not try to connect to any server to get a floating  
password.  
In any case have a look to the file scripts\TemporalVariables, and verify  
that only contain your local password, and any server IP .

The error raised is because when GiD start it try to connect with our ftp  
server to check if exists any GiD version more recent that your version, and  
this connection is not allowed in your system  
(a ‘ping’ is used previously and if it fail the ftp connection won’t be  
tried)

You can fix the problem for example with some of this ways:

- a) avoiding this ‘check for upgrades’ connection. To do it edit the file  
scripts\ConfigureProgram.tcl and change  
set ::GidPriv(ShowCheckNewVersion) 1  
by  
set ::GidPriv(ShowCheckNewVersion) 0

or you can also allow the connection changing your firewall configuration.

b) if you prefer you can download and install the latest GiD version where I  
think that this problem has been fixed and it doesn’t raise any error in  
case of problems with this connection.

Enrique Escolano

-----Mensaje original-----  
De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[mailto:[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de Luís Mendes  
Enviado el: lunes, 14 de octubre de 2013 15:34  
Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Asunto: [GiDlist] GiD 11 issues

Dear all,

We have just bought a local license for GiD 11 and after installing it and  
activating the permanent version, the program presents the following  
issues:

1. A “could not connect to server” warning appears in the textbox below.  
It seems that GiD is pinging a central machine. Windows firewall was set to  
allow all inbound and outbound communication for the Gid executable
2. When accessing the program “Preferences” the “General” does not work and  
error windows are generated.

For further information check the image attached.

In the current state, the software seems to be unusable. Please advice on  
how to correct these issues.

Best regards,

* * *

Luís Mendes

---

<div class="post-metadata">

**Author:** ![rogelio\_diaz](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/r/f6c823/32.png) [@rogelio\_diaz](https://forum.gidsimulation.com/u/rogelio_diaz)\
**Post date:** [October 15, 2013, 6:34pm UTC](https://forum.gidsimulation.com/t/gidlist-gid-11-issues/304/3 "2013-10-15T18:34:16Z")

</div>

I have a problem with the mesh to this geometry i need to help to mesh it  
I wait a answer thank you  
Rogelio Manuel Diaz  
------------ próxima parte ------------  
Se ha borrado un adjunto en formato HTML…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131015/fcd44dc4/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131015/fcd44dc4/attachment-0001.htm)  
------------ próxima parte ------------  
Se ha borrado un mensaje que no est? en formato texto plano…  
Nombre : pr.IGS  
Tipo : application/iges  
Tama?o : 7251506 bytes  
Descripci?n: no disponible  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131015/fcd44dc4/attachment-0001.bin](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131015/fcd44dc4/attachment-0001.bin)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [October 16, 2013, 10:01am UTC](https://forum.gidsimulation.com/t/gidlist-gid-11-issues/304/4 "2013-10-16T10:01:10Z")

</div>

I attach the GiD model after collapse and repair it, to fix some surface  
orientations, and I have rebuild a few problematic surfaces from its  
boundary.

I have been able to generate a coarse mesh of about a million of  
tetrahedral.

The attached model only include the geometry (to be small).

You can generate the same mesh selecting ‘Get meshing parameters from model’  
when meshing.  
  
  
  
The model is problematic to be meshed with volume element because the thin  
depth of the tubes (using an element size similar to this depth you will  
obtain millions of elements)

You must consider to use a simplified surfacic model and do a shell  
analysis, or a more simplified line model, with the tube axes and do a beam  
analysis.  
  
  
  
  
  
Enrique Escolano  
  
  
  
  
  
De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[mailto:[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de rogelio diaz  
Enviado el: martes, 15 de octubre de 2013 20:34  
Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Asunto: [GiDlist] MESH  
  
  
  
I have a problem with the mesh to this geometry

i need to help to mesh it  
  
  
  
I wait a answer thank you  
  
  
  
Rogelio Manuel Diaz

-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131016/4a8ff605/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131016/4a8ff605/attachment-0001.htm)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: pr\_repaired.zip  
Type: application/octet-stream  
Size: 657196 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131016/4a8ff605/attachment-0001.obj](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20131016/4a8ff605/attachment-0001.obj)
