# \[GiDlist\] Contour fill problem of QUAD4

**URL:** <https://forum.gidsimulation.com/t/gidlist-contour-fill-problem-of-quad4/1854>\
**Category:** 2014\
**Created:** [September 11, 2014, 4:23am UTC](https://forum.gidsimulation.com/t/gidlist-contour-fill-problem-of-quad4/1854 "2014-09-11T04:23:27Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![HEMMI\_Shigeru](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/h/54ee81/32.png) [@HEMMI\_Shigeru](https://forum.gidsimulation.com/u/HEMMI_Shigeru)\
**Post date:** [September 11, 2014, 4:23am UTC](https://forum.gidsimulation.com/t/gidlist-contour-fill-problem-of-quad4/1854/1 "2014-09-11T04:23:27Z")

</div>

Dear GiD team,

I encountered a GiD problem in 2D post processing.

For a calculated result given in the post.msh,

MESH dimension 2 ElemType Quadrilateral Nnode 4  
Coordinates  
3358 1.54340557 0.025 0  
3368 1.54340557 0.0125 0  
3378 1.54340557 0 0  
3400 1.56294235 0.025 0  
3405 1.56294235 0.0125 0  
3419 1.56294235 0 0  
3435 1.57865031 0.025 0  
3440 1.57865031 0.0125 0  
3446 1.57865031 0 0  
3475 1.59818709 0.025 0  
3481 1.59818709 0.0125 0  
3487 1.59818709 0 0  
End Coordinates

Elements  
80 3419 3405 3368 3378 8  
160 3405 3400 3358 3368 8  
3201 3446 3440 3405 3419 8  
3202 3440 3435 3400 3405 8  
3241 3487 3481 3440 3446 8  
3321 3481 3475 3435 3440 8  
End Elements

and post.res files,

GiD Post Results File 1.0  
Result “nodalOutput” “iStep” 0 Scalar OnNodes  
ComponentNames “Something”  
Values  
3358 0.763791  
3368 0.876752  
3378 1  
3400 0.589664  
3405 0.65474  
3419 1  
3435 0.410336  
3440 0.34526  
3446 0  
3475 0.236209  
3481 0.123248  
3487 0  
End Values  
  
  
  
The GiD output of contour lines is valid but the contour fill is invalid,  
the latter is not symmetric with respect to the vertical center line.  
Please take a look at the attachment figure.  
GiD seems doing incorrect interpolation for contour fill of QUAD4 element.

I’m using GiD 11.0.8 and my PC is Windows 8.1 pro 64bit.

Best regards,

HEMMI, Shigeru  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: ContourFillInvalidForQUAD4.png  
Type: image/png  
Size: 183150 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140911/c6bd4a77/attachment-0001.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140911/c6bd4a77/attachment-0001.png)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [September 12, 2014, 3:27pm UTC](https://forum.gidsimulation.com/t/gidlist-contour-fill-problem-of-quad4/1854/2 "2014-09-12T15:27:31Z")

</div>

The square was drawn for the contour fill as two triangles, and for a coarse mesh the underlying unsymmetric mesh is visible in the image.

Latest GiD versions use four triangles (with an inner extra node) that provide a more symmetric interpolation.  
  
  
  
You can use the current GiD 12 version or also the last GiD 11.1.9d version (with your current 11.x password),

This is the image obtained with these versions:  
  
  
  
  
  
  
  
Enrique  
  
  
  
-----Mensaje original-----  
De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de HEMMI, Shigeru  
Enviado el: jueves, 11 de septiembre de 2014 6:23  
Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Asunto: [GiDlist] Contour fill problem of QUAD4  
  
  
  
Dear GiD team,  
  
  
  
I encountered a GiD problem in 2D post processing.  
  
  
  
For a calculated result given in the post.msh,  
  
  
  
MESH dimension 2 ElemType Quadrilateral Nnode 4 Coordinates

3358 1.54340557 0.025 0

3368 1.54340557 0.0125 0

3378 1.54340557 0 0

3400 1.56294235 0.025 0

3405 1.56294235 0.0125 0

3419 1.56294235 0 0

3435 1.57865031 0.025 0

3440 1.57865031 0.0125 0

3446 1.57865031 0 0

3475 1.59818709 0.025 0

3481 1.59818709 0.0125 0

3487 1.59818709 0 0

End Coordinates  
  
  
  
Elements

80 3419 3405 3368 3378 8

160 3405 3400 3358 3368 8

3201 3446 3440 3405 3419 8

3202 3440 3435 3400 3405 8

3241 3487 3481 3440 3446 8

3321 3481 3475 3435 3440 8

End Elements  
  
  
  
and post.res files,  
  
  
  
GiD Post Results File 1.0

Result “nodalOutput” “iStep” 0 Scalar OnNodes ComponentNames “Something”

Values

3358 0.763791

3368 0.876752

3378 1

3400 0.589664

3405 0.65474

3419 1

3435 0.410336

3440 0.34526

3446 0

3475 0.236209

3481 0.123248

3487 0

End Values  
  
  
  
  
  
  
  
The GiD output of contour lines is valid but the contour fill is invalid, the latter is not symmetric with respect to the vertical center line.

Please take a look at the attachment figure.

GiD seems doing incorrect interpolation for contour fill of QUAD4 element.  
  
  
  
I’m using GiD 11.0.8 and my PC is Windows 8.1 pro 64bit.  
  
  
  
Best regards,  
  
  
  
HEMMI, Shigeru

-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140912/39bf9f0c/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140912/39bf9f0c/attachment-0001.htm)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: not available  
Type: image/png  
Size: 49980 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140912/39bf9f0c/attachment-0001.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140912/39bf9f0c/attachment-0001.png)

---

<div class="post-metadata">

**Author:** ![HEMMI\_Shigeru](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/h/54ee81/32.png) [@HEMMI\_Shigeru](https://forum.gidsimulation.com/u/HEMMI_Shigeru)\
**Post date:** [September 13, 2014, 12:36am UTC](https://forum.gidsimulation.com/t/gidlist-contour-fill-problem-of-quad4/1854/3 "2014-09-13T00:36:35Z")

</div>

Thanks for the support but Im still annoying.

First I do not have the license of GiD 12.  
I would like to solve problemes within GiD 11.

Please remember that GiD 11.1.9d is not free from crashing; See  
[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html)  
[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html)

and your recommendation was to use GiD 11.0.8 Windows x32,  
[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html)

Which version should I use?

Best regads,

HEMMI, Shigeru  
  
  
2014-09-13 0:27 GMT+09:00 Enrique Escolano [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist):

_The square was drawn for the contour fill as two triangles, and for a_  
_coarse mesh the underlying unsymmetric mesh is visible in the image._  
_Latest GiD versions use four triangles (with an inner extra node) that_  
_provide a more symmetric interpolation._  
  
  
_You can use the current GiD 12 version or also the last GiD 11.1.9d_  
_version (with your current 11.x password),_  
_This is the image obtained with these versions:_  
  
  
  
  
_Enrique_  
  
  
_-----Mensaje original-----_  
_De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:_  
_[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de HEMMI, Shigeru_  
_Enviado el: jueves, 11 de septiembre de 2014 6:23_  
_Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_Asunto: [GiDlist] Contour fill problem of QUAD4_  
  
  
_Dear GiD team,_  
  
  
_I encountered a GiD problem in 2D post processing._  
  
  
_For a calculated result given in the post.msh,_  
  
  
_MESH dimension 2 ElemType Quadrilateral Nnode 4 Coordinates_  
_3358 1.54340557 0.025 0_  
_3368 1.54340557 0.0125 0_  
_3378 1.54340557 0 0_  
_3400 1.56294235 0.025 0_  
_3405 1.56294235 0.0125 0_  
_3419 1.56294235 0 0_  
_3435 1.57865031 0.025 0_  
_3440 1.57865031 0.0125 0_  
_3446 1.57865031 0 0_  
_3475 1.59818709 0.025 0_  
_3481 1.59818709 0.0125 0_  
_3487 1.59818709 0 0_  
_End Coordinates_  
  
  
_Elements_  
_80 3419 3405 3368 3378 8_  
_160 3405 3400 3358 3368 8_  
_3201 3446 3440 3405 3419 8_  
_3202 3440 3435 3400 3405 8_  
_3241 3487 3481 3440 3446 8_  
_3321 3481 3475 3435 3440 8_  
_End Elements_  
  
  
_and post.res files,_  
  
  
_GiD Post Results File 1.0_  
_Result “nodalOutput” “iStep” 0 Scalar OnNodes ComponentNames “Something”_  
_Values_  
_3358 0.763791_  
_3368 0.876752_  
_3378 1_  
_3400 0.589664_  
_3405 0.65474_  
_3419 1_  
_3435 0.410336_  
_3440 0.34526_  
_3446 0_  
_3475 0.236209_  
_3481 0.123248_  
_3487 0_  
_End Values_  
  
  
  
  
  
  
_The GiD output of contour lines is valid but the contour fill is invalid,_  
_the latter is not symmetric with respect to the vertical center line._  
_Please take a look at the attachment figure._  
_GiD seems doing incorrect interpolation for contour fill of QUAD4 element._  
  
  
_I’m using GiD 11.0.8 and my PC is Windows 8.1 pro 64bit._  
  
  
_Best regards,_  
  
  
_HEMMI, Shigeru_  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140913/e961b62f/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140913/e961b62f/attachment-0001.htm)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: image002.png  
Type: image/png  
Size: 49980 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140913/e961b62f/attachment-0001.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140913/e961b62f/attachment-0001.png)

---

<div class="post-metadata">

**Author:** ![escolano](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/escolano/32/6_2.png) [@escolano](https://forum.gidsimulation.com/u/escolano)\
**Post date:** [September 15, 2014, 1:09pm UTC](https://forum.gidsimulation.com/t/gidlist-contour-fill-problem-of-quad4/1854/4 "2014-09-15T13:09:08Z")

</div>

We will not pack any version 11.x more, we will release only new versions 12.x  
  
  
  
Any version will be never completely free of some bug, version 11.1.9d is good enough !!

About its known bugs, you can avoid them, e.g. to insert a model over another you must first generate a mesh in the current model to avoid the crash.  
  
  
  
I remember that you can have installed more than one GiD version, each one is located in a different folder, then decide yourself which is better for your use (in my opinion 11.1.9d is the best 11.x version)

And you can use the win x32 version also in an x64 operating system  
  
  
  
Enrique  
  
  
  
De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de HEMMI, Shigeru  
Enviado el: sábado, 13 de septiembre de 2014 2:37  
Para: Enrique Escolano; [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Asunto: Re: [GiDlist] Contour fill problem of QUAD4  
  
  
  
Thanks for the support but Im still annoying.

First I do not have the license of GiD 12.  
I would like to solve problemes within GiD 11.

Please remember that GiD 11.1.9d is not free from crashing; See  
[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html)  
[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html)

and your recommendation was to use GiD 11.0.8 Windows x32,  
[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html)

Which version should I use?

Best regads,

HEMMI, Shigeru  
  
  
  
2014-09-13 0:27 GMT+09:00 Enrique Escolano [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist):

The square was drawn for the contour fill as two triangles, and for a coarse mesh the underlying unsymmetric mesh is visible in the image.

Latest GiD versions use four triangles (with an inner extra node) that provide a more symmetric interpolation.  
  
  
  
You can use the current GiD 12 version or also the last GiD 11.1.9d version (with your current 11.x password),

This is the image obtained with these versions:  
  
  
  
  
  
  
  
Enrique  
  
  
  
-----Mensaje original-----  
De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de HEMMI, Shigeru  
Enviado el: jueves, 11 de septiembre de 2014 6:23  
Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Asunto: [GiDlist] Contour fill problem of QUAD4  
  
  
  
Dear GiD team,  
  
  
  
I encountered a GiD problem in 2D post processing.  
  
  
  
For a calculated result given in the post.msh,  
  
  
  
MESH dimension 2 ElemType Quadrilateral Nnode 4 Coordinates

3358 1.54340557 0.025 0

3368 1.54340557 0.0125 0

3378 1.54340557 0 0

3400 1.56294235 0.025 0

3405 1.56294235 0.0125 0

3419 1.56294235 0 0

3435 1.57865031 0.025 0

3440 1.57865031 0.0125 0

3446 1.57865031 0 0

3475 1.59818709 0.025 0

3481 1.59818709 0.0125 0

3487 1.59818709 0 0

End Coordinates  
  
  
  
Elements

80 3419 3405 3368 3378 8

160 3405 3400 3358 3368 8

3201 3446 3440 3405 3419 8

3202 3440 3435 3400 3405 8

3241 3487 3481 3440 3446 8

3321 3481 3475 3435 3440 8

End Elements  
  
  
  
and post.res files,  
  
  
  
GiD Post Results File 1.0

Result “nodalOutput” “iStep” 0 Scalar OnNodes ComponentNames “Something”

Values

3358 0.763791

3368 0.876752

3378 1

3400 0.589664

3405 0.65474

3419 1

3435 0.410336

3440 0.34526

3446 0

3475 0.236209

3481 0.123248

3487 0

End Values  
  
  
  
  
  
  
  
The GiD output of contour lines is valid but the contour fill is invalid, the latter is not symmetric with respect to the vertical center line.

Please take a look at the attachment figure.

GiD seems doing incorrect interpolation for contour fill of QUAD4 element.  
  
  
  
I’m using GiD 11.0.8 and my PC is Windows 8.1 pro 64bit.  
  
  
  
Best regards,  
  
  
  
HEMMI, Shigeru  
  
  
  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140915/09893520/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140915/09893520/attachment-0001.htm)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: not available  
Type: image/png  
Size: 49980 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140915/09893520/attachment-0001.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140915/09893520/attachment-0001.png)

---

<div class="post-metadata">

**Author:** ![HEMMI\_Shigeru](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/h/54ee81/32.png) [@HEMMI\_Shigeru](https://forum.gidsimulation.com/u/HEMMI_Shigeru)\
**Post date:** [September 18, 2014, 9:33pm UTC](https://forum.gidsimulation.com/t/gidlist-contour-fill-problem-of-quad4/1854/5 "2014-09-18T21:33:06Z")

</div>

Dear Dr. Enrique Escolano,

Thanks for the reply.

You wrote:  
_We will not pack any version 11.x more, we will release only new versions_  
12.x

In Japan, as a buisiness custom, one year guarantee is often provided for  
commercial products.  
It is some 10 months before since I paid GiD 11 license.  
Since 10 monthes is less than 1 year, it is my hope you pack and provide  
fixed GiD 11 version for me.

For another well known sample as a commercial custom, Microsoft provides  
security fixes  
and some bug fixes for their Windows OS or other products for certain  
periods.  
Thus I believe it is not a miracle if you provide fixed version of the GiD  
11.

Hope this changes your mind.

Best regads,

HEMMI, Shigeru  
  
  
2014-09-15 22:09 GMT+09:00 Enrique Escolano [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist):

_We will not pack any version 11.x more, we will release only new versions_  
_12.x_  
  
  
_Any version will be never completely free of some bug, version 11.1.9d is_  
_good enough !!_  
_About its known bugs, you can avoid them, e.g. to insert a model over_  
_another you must first generate a mesh in the current model to avoid the_  
_crash._  
  
  
_I remember that you can have installed more than one GiD version, each one_  
_is located in a different folder, then decide yourself which is better for_  
_your use (in my opinion 11.1.9d is the best 11.x version)_  
_And you can use the win x32 version also in an x64 operating system_  
  
  
_Enrique_  
  
  
_De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:_  
_[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] \*En nombre de \*HEMMI, Shigeru_  
_Enviado el: sábado, 13 de septiembre de 2014 2:37_  
_Para: Enrique Escolano; [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_Asunto: Re: [GiDlist] Contour fill problem of QUAD4_  
  
  
_Thanks for the support but Im still annoying._  
_First I do not have the license of GiD 12._  
_I would like to solve problemes within GiD 11._  
_Please remember that GiD 11.1.9d is not free from crashing; See_  
\_[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html\_](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html_)  
\_[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html\_](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html_)  
_and your recommendation was to use GiD 11.0.8 Windows x32,_  
\_[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html\_](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html_)  
_Which version should I use?_  
_Best regads,_  
_HEMMI, Shigeru_  
  
  
_2014-09-13 0:27 GMT+09:00 Enrique Escolano [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist):_  
_The square was drawn for the contour fill as two triangles, and for a_  
_coarse mesh the underlying unsymmetric mesh is visible in the image._  
_Latest GiD versions use four triangles (with an inner extra node) that_  
_provide a more symmetric interpolation._  
  
  
_You can use the current GiD 12 version or also the last GiD 11.1.9d_  
_version (with your current 11.x password),_  
_This is the image obtained with these versions:_  
  
  
  
  
_Enrique_  
  
  
_-----Mensaje original-----_  
_De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:_  
_[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de HEMMI, Shigeru_  
_Enviado el: jueves, 11 de septiembre de 2014 6:23_  
_Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_Asunto: [GiDlist] Contour fill problem of QUAD4_  
  
  
_Dear GiD team,_  
  
  
_I encountered a GiD problem in 2D post processing._  
  
  
_For a calculated result given in the post.msh,_  
  
  
_MESH dimension 2 ElemType Quadrilateral Nnode 4 Coordinates_  
_3358 1.54340557 0.025 0_  
_3368 1.54340557 0.0125 0_  
_3378 1.54340557 0 0_  
_3400 1.56294235 0.025 0_  
_3405 1.56294235 0.0125 0_  
_3419 1.56294235 0 0_  
_3435 1.57865031 0.025 0_  
_3440 1.57865031 0.0125 0_  
_3446 1.57865031 0 0_  
_3475 1.59818709 0.025 0_  
_3481 1.59818709 0.0125 0_  
_3487 1.59818709 0 0_  
_End Coordinates_  
  
  
_Elements_  
_80 3419 3405 3368 3378 8_  
_160 3405 3400 3358 3368 8_  
_3201 3446 3440 3405 3419 8_  
_3202 3440 3435 3400 3405 8_  
_3241 3487 3481 3440 3446 8_  
_3321 3481 3475 3435 3440 8_  
_End Elements_  
  
  
_and post.res files,_  
  
  
_GiD Post Results File 1.0_  
_Result “nodalOutput” “iStep” 0 Scalar OnNodes ComponentNames “Something”_  
_Values_  
_3358 0.763791_  
_3368 0.876752_  
_3378 1_  
_3400 0.589664_  
_3405 0.65474_  
_3419 1_  
_3435 0.410336_  
_3440 0.34526_  
_3446 0_  
_3475 0.236209_  
_3481 0.123248_  
_3487 0_  
_End Values_  
  
  
  
  
  
  
_The GiD output of contour lines is valid but the contour fill is invalid,_  
_the latter is not symmetric with respect to the vertical center line._  
_Please take a look at the attachment figure._  
_GiD seems doing incorrect interpolation for contour fill of QUAD4 element._  
  
  
_I’m using GiD 11.0.8 and my PC is Windows 8.1 pro 64bit._  
  
  
_Best regards,_  
  
  
_HEMMI, Shigeru_  
  
  
-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/efb6ddb4/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/efb6ddb4/attachment-0001.htm)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: image001.png  
Type: image/png  
Size: 49980 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/efb6ddb4/attachment-0001.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/efb6ddb4/attachment-0001.png)

---

<div class="post-metadata">

**Author:** ![miguel](https://forum.gidsimulation.com/user_avatar/forum.gidsimulation.com/miguel/32/7_2.png) [@miguel](https://forum.gidsimulation.com/u/miguel)\
**Post date:** [September 19, 2014, 10:04am UTC](https://forum.gidsimulation.com/t/gidlist-contour-fill-problem-of-quad4/1854/6 "2014-09-19T10:04:04Z")

</div>

Hi,

¿ have you tried going to Preferences – Graphical and in the Drawing method block selecting Display Lists instead of Vertex Buffer Objects ?

I tried with a simple quad8 example on gid 11.0.6 and it worked for me:  
  
  
  
  
  
Best regards,  
  
  
  
Miguel Pasenau  
  
  
  
De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de HEMMI, Shigeru  
Enviado el: jueves, 18 de septiembre de 2014 23:33  
Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Asunto: Re: [GiDlist] Contour fill problem of QUAD4  
  
  
  
Dear Dr. Enrique Escolano,

Thanks for the reply.

You wrote:

_We will not pack any version 11.x more, we will release only new versions 12.x_  
In Japan, as a buisiness custom, one year guarantee is often provided for commercial products.  
It is some 10 months before since I paid GiD 11 license.  
Since 10 monthes is less than 1 year, it is my hope you pack and provide fixed GiD 11 version for me.

For another well known sample as a commercial custom, Microsoft provides security fixes  
and some bug fixes for their Windows OS or other products for certain periods.  
Thus I believe it is not a miracle if you provide fixed version of the GiD 11.

Hope this changes your mind.

Best regads,

HEMMI, Shigeru  
  
  
  
2014-09-15 22:09 GMT+09:00 Enrique Escolano [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist):

We will not pack any version 11.x more, we will release only new versions 12.x  
  
  
  
Any version will be never completely free of some bug, version 11.1.9d is good enough !!

About its known bugs, you can avoid them, e.g. to insert a model over another you must first generate a mesh in the current model to avoid the crash.  
  
  
  
I remember that you can have installed more than one GiD version, each one is located in a different folder, then decide yourself which is better for your use (in my opinion 11.1.9d is the best 11.x version)

And you can use the win x32 version also in an x64 operating system  
  
  
  
Enrique  
  
  
  
De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de HEMMI, Shigeru  
Enviado el: sábado, 13 de septiembre de 2014 2:37  
Para: Enrique Escolano; [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Asunto: Re: [GiDlist] Contour fill problem of QUAD4  
  
  
  
Thanks for the support but Im still annoying.

First I do not have the license of GiD 12.  
I would like to solve problemes within GiD 11.

Please remember that GiD 11.1.9d is not free from crashing; See  
[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html)  
[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html)

and your recommendation was to use GiD 11.0.8 Windows x32,  
[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html)

Which version should I use?

Best regads,

HEMMI, Shigeru  
  
  
  
2014-09-13 0:27 GMT+09:00 Enrique Escolano [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist):

The square was drawn for the contour fill as two triangles, and for a coarse mesh the underlying unsymmetric mesh is visible in the image.

Latest GiD versions use four triangles (with an inner extra node) that provide a more symmetric interpolation.  
  
  
  
You can use the current GiD 12 version or also the last GiD 11.1.9d version (with your current 11.x password),

This is the image obtained with these versions:  
  
  
  
  
  
  
  
Enrique  
  
  
  
-----Mensaje original-----  
De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de HEMMI, Shigeru  
Enviado el: jueves, 11 de septiembre de 2014 6:23  
Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Asunto: [GiDlist] Contour fill problem of QUAD4  
  
  
  
Dear GiD team,  
  
  
  
I encountered a GiD problem in 2D post processing.  
  
  
  
For a calculated result given in the post.msh,  
  
  
  
MESH dimension 2 ElemType Quadrilateral Nnode 4 Coordinates

3358 1.54340557 0.025 0

3368 1.54340557 0.0125 0

3378 1.54340557 0 0

3400 1.56294235 0.025 0

3405 1.56294235 0.0125 0

3419 1.56294235 0 0

3435 1.57865031 0.025 0

3440 1.57865031 0.0125 0

3446 1.57865031 0 0

3475 1.59818709 0.025 0

3481 1.59818709 0.0125 0

3487 1.59818709 0 0

End Coordinates  
  
  
  
Elements

80 3419 3405 3368 3378 8

160 3405 3400 3358 3368 8

3201 3446 3440 3405 3419 8

3202 3440 3435 3400 3405 8

3241 3487 3481 3440 3446 8

3321 3481 3475 3435 3440 8

End Elements  
  
  
  
and post.res files,  
  
  
  
GiD Post Results File 1.0

Result “nodalOutput” “iStep” 0 Scalar OnNodes ComponentNames “Something”

Values

3358 0.763791

3368 0.876752

3378 1

3400 0.589664

3405 0.65474

3419 1

3435 0.410336

3440 0.34526

3446 0

3475 0.236209

3481 0.123248

3487 0

End Values  
  
  
  
  
  
  
  
The GiD output of contour lines is valid but the contour fill is invalid, the latter is not symmetric with respect to the vertical center line.

Please take a look at the attachment figure.

## GiD seems doing incorrect interpolation for contour fill of QUAD4 element. I’m using GiD 11.0.8 and my PC is Windows 8.1 pro 64bit. Best regards, HEMMI, Shigeru \

Este mensaje no contiene virus ni malware porque la protección de avast! Antivirus está activa.

> **[Avast | Download Free Antivirus & VPN | 100% Free & Easy](https://www.avast.com/en-eu/index)**
>
> Join hundreds of millions of others & get free antivirus for PC, Mac, & Android. Surf safely with our VPN. Download Avast!

-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0001.htm)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: not available  
Type: image/png  
Size: 49980 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0001.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0001.png)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: not available  
Type: image/jpeg  
Size: 25279 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0003.jpeg](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0003.jpeg)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: not available  
Type: image/jpeg  
Size: 27348 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0004.jpeg](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0004.jpeg)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: not available  
Type: image/jpeg  
Size: 23971 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0005.jpeg](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/32b6e8bc/attachment-0005.jpeg)

---

<div class="post-metadata">

**Author:** ![HEMMI\_Shigeru](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/h/54ee81/32.png) [@HEMMI\_Shigeru](https://forum.gidsimulation.com/u/HEMMI_Shigeru)\
**Post date:** [September 19, 2014, 11:37am UTC](https://forum.gidsimulation.com/t/gidlist-contour-fill-problem-of-quad4/1854/7 "2014-09-19T11:37:32Z")

</div>

Dear Miguel A. Pasenau de Riera and Enrique Escolano,

As you wrote, “Display lists” or “Immediate mode” of my GiD 11.0.8 solved  
my annoying problem.

Thank you very much for taking the time for me and your patience.

Best regards,

HEMMI, Shigeru  
  
  
2014-09-19 19:04 GMT+09:00 Miguel A. Pasenau de Riera [miguel at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
:

_Hi,_  
_¿ have you tried going to \*Preferences – Graphical \*and in the \*Drawing_  
_method\* block selecting Display Lists instead of Vertex Buffer Objects_  
_?_  
_I tried with a simple quad8 example on gid 11.0.6 and it worked for me:_  
  
  
_Best regards,_  
  
  
_Miguel Pasenau_  
  
  
_De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:_  
_[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] \*En nombre de \*HEMMI, Shigeru_  
_Enviado el: jueves, 18 de septiembre de 2014 23:33_  
_Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_Asunto: Re: [GiDlist] Contour fill problem of QUAD4_  
  
  
_Dear Dr. Enrique Escolano,_  
_Thanks for the reply._  
_You wrote:_  
_We will not pack any version 11.x more, we will release only new_  
_versions 12.x_  
_In Japan, as a buisiness custom, one year guarantee is often provided for_  
_commercial products._  
_It is some 10 months before since I paid GiD 11 license._  
_Since 10 monthes is less than 1 year, it is my hope you pack and provide_  
_fixed GiD 11 version for me._  
_For another well known sample as a commercial custom, Microsoft provides_  
_security fixes_  
_and some bug fixes for their Windows OS or other products for certain_  
_periods._  
_Thus I believe it is not a miracle if you provide fixed version of the GiD_  
_11._  
_Hope this changes your mind._  
_Best regads,_  
_HEMMI, Shigeru_  
  
  
_2014-09-15 22:09 GMT+09:00 Enrique Escolano [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist):_  
_We will not pack any version 11.x more, we will release only new versions_  
_12.x_  
  
  
_Any version will be never completely free of some bug, version 11.1.9d is_  
_good enough !!_  
_About its known bugs, you can avoid them, e.g. to insert a model over_  
_another you must first generate a mesh in the current model to avoid the_  
_crash._  
  
  
_I remember that you can have installed more than one GiD version, each one_  
_is located in a different folder, then decide yourself which is better for_  
_your use (in my opinion 11.1.9d is the best 11.x version)_  
_And you can use the win x32 version also in an x64 operating system_  
  
  
_Enrique_  
  
  
_De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:_  
_[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] \*En nombre de \*HEMMI, Shigeru_  
_Enviado el: sábado, 13 de septiembre de 2014 2:37_  
_Para: Enrique Escolano; [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_Asunto: Re: [GiDlist] Contour fill problem of QUAD4_  
  
  
_Thanks for the support but Im still annoying._  
_First I do not have the license of GiD 12._  
_I would like to solve problemes within GiD 11._  
_Please remember that GiD 11.1.9d is not free from crashing; See_  
\_[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html\_](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005063.html_)  
\_[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html\_](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005066.html_)  
_and your recommendation was to use GiD 11.0.8 Windows x32,_  
\_[http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html\_](http://listas.cimne.upc.edu/pipermail/gidlist/2014/005076.html_)  
_Which version should I use?_  
_Best regads,_  
_HEMMI, Shigeru_  
  
  
_2014-09-13 0:27 GMT+09:00 Enrique Escolano [escolano at cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist):_  
_The square was drawn for the contour fill as two triangles, and for a_  
_coarse mesh the underlying unsymmetric mesh is visible in the image._  
_Latest GiD versions use four triangles (with an inner extra node) that_  
_provide a more symmetric interpolation._  
  
  
_You can use the current GiD 12 version or also the last GiD 11.1.9d_  
_version (with your current 11.x password),_  
_This is the image obtained with these versions:_  
  
  
  
  
_Enrique_  
  
  
_-----Mensaje original-----_  
_De: [gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist) [mailto:_  
_[gidlist-bounces at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)] En nombre de HEMMI, Shigeru_  
_Enviado el: jueves, 11 de septiembre de 2014 6:23_  
_Para: [gidlist at listas.cimne.upc.edu](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
_Asunto: [GiDlist] Contour fill problem of QUAD4_  
  
  
_Dear GiD team,_  
  
  
_I encountered a GiD problem in 2D post processing._  
  
  
_For a calculated result given in the post.msh,_  
  
  
_MESH dimension 2 ElemType Quadrilateral Nnode 4 Coordinates_  
_3358 1.54340557 0.025 0_  
_3368 1.54340557 0.0125 0_  
_3378 1.54340557 0 0_  
_3400 1.56294235 0.025 0_  
_3405 1.56294235 0.0125 0_  
_3419 1.56294235 0 0_  
_3435 1.57865031 0.025 0_  
_3440 1.57865031 0.0125 0_  
_3446 1.57865031 0 0_  
_3475 1.59818709 0.025 0_  
_3481 1.59818709 0.0125 0_  
_3487 1.59818709 0 0_  
_End Coordinates_  
  
  
_Elements_  
_80 3419 3405 3368 3378 8_  
_160 3405 3400 3358 3368 8_  
_3201 3446 3440 3405 3419 8_  
_3202 3440 3435 3400 3405 8_  
_3241 3487 3481 3440 3446 8_  
_3321 3481 3475 3435 3440 8_  
_End Elements_  
  
  
_and post.res files,_  
  
  
_GiD Post Results File 1.0_  
_Result “nodalOutput” “iStep” 0 Scalar OnNodes ComponentNames “Something”_  
_Values_  
_3358 0.763791_  
_3368 0.876752_  
_3378 1_  
_3400 0.589664_  
_3405 0.65474_  
_3419 1_  
_3435 0.410336_  
_3440 0.34526_  
_3446 0_  
_3475 0.236209_  
_3481 0.123248_  
_3487 0_  
_End Values_  
  
  
  
  
  
  
_The GiD output of contour lines is valid but the contour fill is invalid,_  
_the latter is not symmetric with respect to the vertical center line._  
_Please take a look at the attachment figure._  
_GiD seems doing incorrect interpolation for contour fill of QUAD4 element._  
  
  
_I’m using GiD 11.0.8 and my PC is Windows 8.1 pro 64bit._  
  
  
_Best regards,_  
  
  
_HEMMI, Shigeru_  
  
  
  
  
  
_------------------------------_  
\_[http://www.avast.com/\_](http://www.avast.com/_)  
_Este mensaje no contiene virus ni malware porque la protección de avast!_  
_Antivirus [http://www.avast.com/](http://www.avast.com/) está activa._

-------------- next part --------------  
An HTML attachment was scrubbed…  
URL: [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0001.htm](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0001.htm)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: image005.jpg  
Type: image/jpeg  
Size: 23971 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0003.jpg](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0003.jpg)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: image001.png  
Type: image/png  
Size: 49980 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0002.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0002.png)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: image004.jpg  
Type: image/jpeg  
Size: 27348 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0004.jpg](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0004.jpg)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: image003.jpg  
Type: image/jpeg  
Size: 25279 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0005.jpg](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0005.jpg)  
-------------- next part --------------  
A non-text attachment was scrubbed…  
Name: ContourFillInvalidSolved.png  
Type: image/png  
Size: 71380 bytes  
Desc: not available  
Url : [http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0003.png](http://listas.cimne.upc.edu/pipermail/gidlist/attachments/20140919/a120a782/attachment-0003.png)
