# \[GiDlist\] Contact creation

**URL:** <https://forum.gidsimulation.com/t/gidlist-contact-creation/1535>\
**Category:** 2002 - 2000\
**Created:** [December 9, 2002, 9:53am UTC](https://forum.gidsimulation.com/t/gidlist-contact-creation/1535 "2002-12-09T09:53:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Arturo\_di\_Gioia](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/a/7bcc69/32.png) [@Arturo\_di\_Gioia](https://forum.gidsimulation.com/u/Arturo_di_Gioia)\
**Post date:** [December 9, 2002, 9:53am UTC](https://forum.gidsimulation.com/t/gidlist-contact-creation/1535/1 "2002-12-09T09:53:02Z")

</div>

Hi,  
I’m trying to create a FEM mesh with GiD. I’ve got two volumes and I’d  
like to duplicate the nodes at the interface (thus generating two meshes  
with coincident surface mesh at the contact surface). In order to do it  
I:

1. Duplicated the surfaces shared by the two bodies, using in ‘copy’  
command the options ‘duplicate’ and ‘create contact’.
2. I defined the volumes of the two bodies using for each one different  
surfaces.
3. I would like to mesh the bodies with quadratic tethraedra elements.

My questions are:  
What is a ‘contact volume’? I’m sorry, but reading the documentation  
i’ve not be able to figure out what could it be. I read that this volume  
can be meshed only with linear elements. Do normal volumes defined using  
at least one surface with contact flag automatically become a contact  
volume? I read also that it is possible not to mesh contact volumes. How  
do I achieve this? I found no commands about contact meshes.

## Thanks. \

Arturo di Gioia

Address:  
Dipartimento di Ingegneria Meccanica e Strutturale  
Universita’ degli Studi di Trento  
v. Mesiano 77  
38100 Trento  
ITALY

tel (office) : +39 0461882525  
tel (personal): +39 3489118982  
web:  
[http://www.ing.unitn.it/~digioia/](http://www.ing.unitn.it/~digioia/)  
PGP public key:  
[http://www.ing.unitn.it/~digioia/files/adg\_gpg\_pub.asc](http://www.ing.unitn.it/~digioia/files/adg_gpg_pub.asc)

---

<div class="post-metadata">

**Author:** ![Ramon\_Rib\_oacute](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/r/8797f3/32.png) [@Ramon\_Rib\_oacute](https://forum.gidsimulation.com/u/Ramon_Rib_oacute)\
**Post date:** [December 9, 2002, 10:29am UTC](https://forum.gidsimulation.com/t/gidlist-contact-creation/1535/2 "2002-12-09T10:29:02Z")

</div>

Hello,

The contact entity that joins the two volumes, the one created  
when used ‘copy’ with ‘duplicate’ and ‘create contact’, is considered  
by GiD as a Volume. In this way, it is possible to use the normal  
GiD commands to operate on it. You can use:

Meshing-Elemtype-…  
Meshing-Mesh criteria-…

and select this volume.

So, your model should have 3 volumes instead of just 2.

The only problem here for you is that the contact volumes do  
not support quadratic elements.

Best regards,

–  
Compass Ing. y Sistemas Dr. Ramon Ribó  
[http://www.compassis.com](http://www.compassis.com)[ramsan at compassis.com](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
c/ Manuel Girona, 61 bajos tel. +34 93 204 10 82  
08034 Barcelona, Spain fax. +34 93 204 19 09

-----Mensaje original-----  
De: [gidlist-admin at gatxan.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[mailto:[gidlist-admin at gatxan.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)]En nombre de Arturo di Gioia  
Enviado el: lunes, 09 de diciembre de 2002 10:54  
Para: GiD\_list  
Asunto: [GiDlist] Contact creation  
  
  
Hi,  
I’m trying to create a FEM mesh with GiD. I’ve got two volumes and I’d  
like to duplicate the nodes at the interface (thus generating two meshes  
with coincident surface mesh at the contact surface). In order to do it  
I:

1. Duplicated the surfaces shared by the two bodies, using in ‘copy’  
command the options ‘duplicate’ and ‘create contact’.
2. I defined the volumes of the two bodies using for each one different  
surfaces.
3. I would like to mesh the bodies with quadratic tethraedra elements.

My questions are:  
What is a ‘contact volume’? I’m sorry, but reading the documentation  
i’ve not be able to figure out what could it be. I read that this volume  
can be meshed only with linear elements. Do normal volumes defined using  
at least one surface with contact flag automatically become a contact  
volume? I read also that it is possible not to mesh contact volumes. How  
do I achieve this? I found no commands about contact meshes.

## Thanks. \

Arturo di Gioia

Address:  
Dipartimento di Ingegneria Meccanica e Strutturale  
Universita’ degli Studi di Trento  
v. Mesiano 77  
38100 Trento  
ITALY

tel (office) : +39 0461882525  
tel (personal): +39 3489118982  
web:  
[http://www.ing.unitn.it/~digioia/](http://www.ing.unitn.it/~digioia/)  
PGP public key:  
[http://www.ing.unitn.it/~digioia/files/adg\_gpg\_pub.asc](http://www.ing.unitn.it/~digioia/files/adg_gpg_pub.asc)

* * *

GiDlist mailing list  
[GiDlist at gid.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
[http://gid.cimne.upc.es/mailman/listinfo/gidlist](http://gid.cimne.upc.es/mailman/listinfo/gidlist)

---

<div class="post-metadata">

**Author:** ![Enrique\_Escolano](https://forum.gidsimulation.com/letter_avatar_proxy/v4/letter/e/ecd19e/32.png) [@Enrique\_Escolano](https://forum.gidsimulation.com/u/Enrique_Escolano)\
**Post date:** [December 9, 2002, 10:58am UTC](https://forum.gidsimulation.com/t/gidlist-contact-creation/1535/3 "2002-12-09T10:58:01Z")

</div>

See some brief explanation about the “GiD-contact” concept at:

[http://gid.cimne.com/pipermail/gidlist/2001/000294.html](http://gid.cimne.com/pipermail/gidlist/2001/000294.html)

Enrique  
----- Original Message -----  
From: “Arturo di Gioia” [arturo.digioia at ing.unitn.it](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
To: “GiD\_list” [gidlist at gatxan.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)  
Sent: Monday, December 09, 2002 10:54 AM  
Subject: [GiDlist] Contact creation  
  
  
_Hi,_  
_I’m trying to create a FEM mesh with GiD. I’ve got two volumes and I’d_  
_like to duplicate the nodes at the interface (thus generating two meshes_  
_with coincident surface mesh at the contact surface). In order to do it_  
_I:_  
_1) Duplicated the surfaces shared by the two bodies, using in ‘copy’_  
_command the options ‘duplicate’ and ‘create contact’._  
_2) I defined the volumes of the two bodies using for each one different_  
_surfaces._  
_3) I would like to mesh the bodies with quadratic tethraedra elements._  
_My questions are:_  
_What is a ‘contact volume’? I’m sorry, but reading the documentation_  
_i’ve not be able to figure out what could it be. I read that this volume_  
_can be meshed only with linear elements. Do normal volumes defined using_  
_at least one surface with contact flag automatically become a contact_  
_volume? I read also that it is possible not to mesh contact volumes. How_  
_do I achieve this? I found no commands about contact meshes._  
_Thanks._

_–_  
_Arturo di Gioia_  
_Address:_  
_Dipartimento di Ingegneria Meccanica e Strutturale_  
_Universita’ degli Studi di Trento_  
_v. Mesiano 77_  
_38100 Trento_  
_ITALY_  
_tel (office) : +39 0461882525_  
_tel (personal): +39 3489118982_  
_web:_  
\_[http://www.ing.unitn.it/~digioia/\_](http://www.ing.unitn.it/~digioia/_)  
_PGP public key:_  
\_[http://www.ing.unitn.it/~digioia/files/adg\_gpg\_pub.asc\_](http://www.ing.unitn.it/~digioia/files/adg_gpg_pub.asc_)

* * *

_GiDlist mailing list_  
_[GiDlist at gid.cimne.upc.es](http://listas.cimne.upc.edu/cgi-bin/mailman/listinfo/gidlist)_  
\_[http://gid.cimne.upc.es/mailman/listinfo/gidlist\_](http://gid.cimne.upc.es/mailman/listinfo/gidlist_)
